Title: 3 Effective Methods to Repair the Cracked Plastic Radiator of Car
13 Effective Methods to Repair the Cracked Plastic
Radiator of Car
2Repairing the cracked radiator is a relatively
quick and easy job, but you can save your money
by locating the crack and fixing the problem
yourself.
3 Various parts of the plastic radiator can leak.
The leakage can be arises from the cracked hose
or the body of the radiator itself.
4 Before you perform the actual repair of the car,
the first thing you need to examine the fittings
that can lead to the radiator.
5 In this cases, the leakage is coming from the
radiator, put the old clothes on, roll up the
sleeves and go through the below steps.
6Detect the crack
7The easiest method to detect the cracked radiator
by letting the engine running until the
temperature is normally high.
8 It will take half an hour before building the
pressure and shut off the engine so, the pressure
removes the coolant from the crack.
9Mark cracked area with a marker and wait for the
tank to cool down and take the cap off. At last,
check the crack is either above or below the
coolant level.
10 If it is below the level, drain some coolant
until the crack visible. Remove the lower hose
cap to drain the radiator tank.
11Prepare the crack area
12To clean the crack area pour a little acetone
over the toothbrush and start to scrub the crack
and its surrounding areas.
13 Once the acetone dissipates, you can continue
the scrubbing process until the area is dry and
contain no moisture on the surface.
14For drying the cracked area of the radiator, you
can also use the hairdryer and hold it close to
the crack.
15If the moisture is resurfaced again, then you
have to keep the blowing over the crack until the
place is dry completely.
16Perform the actual repair
17 You can press the soldering iron against the tie
until it begins to melt or just working like a
sealant and press the tie to wrap it into the
crack.
18You can slowly move along the cracked area and
ensure that it could melt well enough to seal the
crack.
19Keep melting them in one place until the tie and
its surrounding areas turn into a hot liquid.
Melt the entire crack and wait for the liquid to
harden.
20At last, cut off all the unused area of the tie
and fill the coolant in the radiator to complete
the test and make sure that the crack is sealed
completely.
21Conclusion
22 To fix the cracked plastic radiator of your car
yourself, you need a new found knowledge and a
little elbow grease.
23 In this way, you can repair the cracked plastic
radiator of your car without taking any
professional's help.
24https//www.greengaragewp.com/
https//www.facebook.com/407gogreen/ https//plus
.google.com/116381544255127898773