How to Repair a 933 Printhead Error T640 in Lexmark Printer?

1
How to Repair a 933 Printhead Error T640 in
Lexmark Printer?
2
Lexmark T640 printer has a number of internal
hardware and software components that may stop
working correctly over time. If you are getting
an error message on your printer screen, error
named is "Printhead Error 933", you are probably
experiencing issues printing or all the prints
are lean. The 933 Printhead errors are generally
caused by a loose cable innermost the printer. To
fix this problem, you need to open the printer
and manually fix the cable.
3
Lexmark Printer Tech Support Canada helps you to
solve your problem. You need to follow below
information conscientiously-
Step 1 Firstly, you need to press and hold the
power button on the front of the Lexmark printer
prior to the device turns off. Then wait one full
minute, and tap the power button again. Open a
text document on the screen, and try to print
again to check if the issue is solved. Step
2 If the problem still continues, then turn off
the printer, and also unplug its power cable. And
push the release latch on the front of the
printer, and let down the lower plastic door.
Press the release latch innermost of the top
plastic door, and lift the door turn up.
4
Step 3 Next, push the two latches of the printer
at the left end. And also pull the plastic door
at the left end of the printer. Use a screwdriver
to loosen six screws holding the metal shield to
the left end of the printer, but do not remove
them completely. Step 4 Now, you have to move
the metal shield over the right to express the
multicolored cable at the top of the device
board. Unplug your cable and again plug in. And
check to ensure the cable is properly seated and
making it full connection. Step 5 Now, you can
slide the metal shield back into its original
place, and tighten the screw you opened before.
And also push the three plastic doors back its
original position, plug in the printer's power
cable tap the power button, and start a new print
work.
5
If you are still not enabled to resolve this
problem with your printer. Then, give a call to
Lexmark Printer Support Canada Number
1-778-806-1736, they will discuss the query with
you and provide one of the best solutions
according to issues. Our team is here to help all
of the Lexmark printer users. So, no one needs to
hesitate to connect with us.
6
Thank You!

• Any Query?
• Call _at_ 1-778-806-1736
• You can find us at
• https//lexmark.printersupportnumbercanada.ca/