A Close Look at Centrifugal Bowls

1
A CLOSE LOOK AT CENTRIFUGAL BOWLS
2
Centrifugal bowls work by using a stainless
basket centrifuge that spins 3000g- forces,
separating fluids and solids from batches of
wastewater. This device filters at a rate of 4800
litres an hour and can separate 10 litres of
solid from 3000 litres of wastewater.
3
Its rotated bowl throws the solids to the sides
where they form a thick coating of sludge. It has
four load cells and when it reaches a pre-set
weight, it automatically goes into a cleaning
cycle which scrapes off the accumulated solids.
The cleaning cycle doesnt stop the machine. It
continues to spin, releasing filtered water
through its outlet pipe while it cleans.
4
If the solids are too light to be detected by the
load cells, then you can set a timer which will
start the cleaning cycle after a given period of
time. The IC 45-AV prevents downtime because it
never stops, the cleaning cycle ensures maximum
efficiency.
5
Automated and Manual Cleaning Options
If you want to clean the centrifugal basket by
hand, you can scrape the bowl by hand before
re-attaching it. It only needs two-way electrical
and plumbing, going in and out of the machine. It
can be used as a stand-alone or attached to a
system, riveted in place or trolleyed around the
factory.
6
In its automated form, you can programme all the
necessary weights and timers using the touchpad,
then it can function without further
intervention, cutting the expense of a human
operator. Its designed to require minimal
maintenance, adding to its cost-saving function.
7
THANK YOU!