Laser Mark Your Wire With Miracle Aerospace - Miracle Aerospace

1
Laser Mark Your Wire With Miracle Aerospace
With hundreds of wires within an aircraft, it
becomes difficult to identify and manage them.
This is why every wire on an aircraft is given
its own unique identification number. This
process of putting the identifier on the wire is
done by laser wire marking, which is a method
that helps to place a permanent mark on a wire
using a laser. There are special machines that
are designed to carry out this process. Earlier,
these machines were large and expensive, but now
desktop models are available that are easy to
handle and are also reasonably priced. Titanium
dioxide is found in the insulation of an aircraft
wire for other purposes like marking the white
insulation in color. When the laser interacts
with this titanium dioxide in a wires
insulation, the permanent mark is formed. When
the laser beam hits the wire, the pigment in the
insulation is discolored, thus leaving a
permanent mark on it. There is a metal disc that
has cutouts of letters, numbers, and symbols,
which is used to form characters on the wire the
disc turns as required, and the laser beam goes
through the disc for a particular letter,
number, or symbol to be printed. When the beam
exits the disc, it is shaped as the desired
character.
With such state-of-the-art machines, high quality
identification marking that is durable and
permanent is marked on the wires. White or
colored insulations can be marked as required.
This kind of laser marking is a great
alternative to hot stamping, direct inking, and
other wire marking methods. These methods can
damage the wire, causing electrical failures, or
can wear off over time due to friction. But,
laser marked wires retain their electrical
characteristics, while also staying permanent,
no doubt how much the friction or harsh
environmental conditions.
2
You can get such permanent, durable, and high
quality wire markings done at Miracle Aerospace.
The laser marking job work is done precisely
after considering all the important aspects of
the wire, the environment, and the application
it is going to be used in. You can have all kinds
of uppercase, lowercase, alphanumerics, and
other extra characters printed, with a standard
specification of up to 96 characters per
identifications. Also, barcode marking is
possible. No matter what your wire size range,
Miracle Aerospace can provide you with laser
marking services for all kinds of wires ranging
between 0.8 mm to 6.35 mm, OD 26 AWG to 6 AWG
nominal, and single core to multi core provided
that the wire has a minimum length of 6 inches.
Above that, an unlimited maximum length of cable
can be laser marked. So, whatever your wire type
polymide, PTFE, ETFE, Teflon, Tefzel, or FEP
you can have them effectively marked at Miracle
Aerospace. Along with this, you can also have a
number of other electronic manufacturing services
at Miracle Aerospace, who is best known for
providing the best quality PCB assembly from
India, taking care of everything from designing,
architecture, manufacturing, to logistics.