Effective Methods to Remove the Broken Key From the Ignition

1
Effective Methods to Remove the
Broken Key from the Ignition
2
If you are very late for your work and turn the
key of your car quickly or hard in the ignition,
then the key of your car can break and stuck into
the ignition.
3
People often get worried and thought that there
is no way to get the key out of the ignition.
4
So, be calm, this is just a rumor spread by the
people. Yes, it's possible to remove the key from
the ignition.
5
Make sure that you are using the suitable kind
of household tools and equipment to remove the
key without affecting the ignition.
6
Here the following points will help you to remove
the broken key from your ignition in a simple
way.
Using a hacksaw
Using a coated wire
Using a plier
Using cooking spray
7
Using a plier
8
If the broken key is sticking out of the
ignition, then you can use a plier to latch onto
the keys and pull them out.
9
To grip the key piece using a plier, you need
to apply some glue, melted wax in the tool's tip
and wait until the glue set a little bit.
10
Then, with the plier latch onto the key pieces
and pull the key out. You can use the cotton
swabs and acetone to unglue the plier.
11
Using a coated wire
12
If you are unable to get the key out of your car
ignition with the plier, then try to use some
coated wire hanger to remove it.
13
You can bring a 6 to 8 inch coated wire hanger
and shape one end of the wire hanger with the
help of pliers into a hook.
14
Then insert the wire hook into the car's
ignition either behind or front of the broken car
key to pull the pieces out.
15
Using a hacksaw
16
If you can't grip your stuck key with pliers or
a coat hanger, then put your ignition in the
neutral position.
17
Put the hacksaw blade upward beside the broken
in the ignition, then turn the ignition. After
that pull the hacksaw blade carefully.
18
The hacksaw blades grab onto the front or back
of the key, then latch onto the groove of the key
to pull it out.
19
Using cooking spray
20
If you are unable to get the key out of the
ignition with the plier, coated wire, and
hacksaw, then apply some cooking spray inside of
the ignition.
21
If you want to use the plier, then don't apply
the cooking spray because it will make key too
slippery and grab by the ignition.
22
After applying the cooking spray, push the key
out with a hacksaw blade. Try to wiggle the blade
inside of the ignition to latch on the grooves of
the blade.
23
http//oriona2.com/
/orionautomotiveservices