DIY Curtain Steam Cleaning Hacks

1
(No Transcript)
2
STEP 1
Fill the water tank in the steam cleaner
according to the manufacturers instructions. You
can choose any kind of steam generator used for
cleaning purposes. It would only take 5 to 10
minutes for the water to heat.
3
STEP 2
Dont stick the nozzle from where the steam
emanates directly to the curtain fabric. Hold the
nozzle 6 inches from the drapes. Begin from the
top and continue moving to the bottom to spray
the drapes with steam.
4
STEP 3
Move the nozzle closer while at the seam lines,
keep the nozzle to 2 inches from the drapes
instead of 6 inches. When you have sprayed the
entire front surface of the drapes, detach the
jet nozzle from the hose and set it aside.
5
STEP 4
Attach the fabric or drape tool to the end of the
hose. Hold the hose straight upright, so the
dirty condensation collected from the curtains
can run back down the hose and into the machine.
Lightly touch the cleaning tool on the end of the
hose to the top of the drapes. Move the tool
slowly down the fabric panel from top to bottom.
6
STEP 5
Keep steaming the drapes until you have covered
the entire front surface.
Repeat the process with the fabric or drape tool
on the rear side of the drapes.
7
Tomscurtaincleaning.com.au