How to setup Linksys WRE54G Range Extender On Your Home Network?

1
How to setUp Linksys WRE54G Range Extender On
Your Home Network?

• Call us toll free 877-649-6892
• To get more information visit on
• https//www.mywifiextnet.xyz/

2
mywifiext
Have you bought Linksys WRE54G Range Extender? If
yes, then you must be looking for a way to
install it on your home network, right? In
todays blog post, we are going to discuss
exactly that,
3
www mywifiext net login
so I need you to pay a close attention to this
blog post because by following the information
that is given in the post, you will be able to
set up the Wi-Fi range extender on your own.
4
mywifiext net login
Let me make it very clear for you, setting up
this range extender Wifi is not that easy as you
would think, but if you are able to follow the
steps that Im about to write in the same pattern
in which they are given, then you are less likely
to experience any issue.
5
You will have to enable the security option on
your wireless network, but if you dont have that
option, then you will have to enable
auto-configure button, especially when there is
just a single access point available.
6
www.mywifiext.net
The default IP address that you will have to use
is 192.168.1.240, so you will have to use this IP
address, to begin the process. You can easily
change your IP address if it lies within the
range between 192.168.1.1 and 192.168.1.254.
7
It needs to have a subnet mask of 255.255.255.0.
Now, you will have to connect an Ethernet cable
directly from your PC to the device.
8
The next thing would be to configure the current
router to use WDS bridging. This is whats going
to allow the extender to extend the network. I
dont know what word would come when you perform
this step, but on my PC, I see the word
Bridging.
9
You will now have to enter the MAC address of the
Wi-Fi range extender that appears under the
device. There are some devices that would require
you to check a box in order to enable WDS.
10
The next step would be to connect to the device
via Wi-Fi. You need to scan the network followed
by adding the last eight characters of the MAC
address.
11
www mywifiext net
The process is fast approaching the completion,
as you have successfully connected the extender
to the device by undermining certain security
warnings. Open your web browser now and point it
to 192.168.1.240, which will open up a login box.
12
www mywifiext net setup
In the default user field, you dont have to
write anything, but when it comes to the default
password, you need to type admin. This will get
you into the extender settings console, where you
can make changes according to your requirements.
13
mywifiext net
You will be able to see arrows leading you
towards the section from where you can change the
IP address of the device that is connected to
your network. The SSID should also match with the
SSID to your Wireless network in order to allow
an interrupted network connection.
14
If you want to create a separate network, then
you will have to change the name of the SSID
instead of keeping the default SSID. It is also
possible for you to enable security and make
changes to other settings. After making all the
necessary changes, you can change the local IP
address back to what it was at the time when you
changed it to something else.
15
www mywifiext net setup wizard
Now, plug back the device into your home network.
The extender has been successfully installed,
and now you can access internet beyond the
original range of your router.
16
Contact us

• San Diego, California
• 92123,usa
• Call us toll free 877-649-6892
• https//www.mywifiextnet.xyz/