How to Make a Balloon Arch in 7 Easy Steps

1
How to Make a Balloon Arch
Presented By Wayne Chen
https//www.partyzealot.com
2
Find or create a wire base.

• Use wire cutters to cut a long piece of sturdy
  wire to the length and height you want the arch
  to be. You can also purchase a balloon arch kit
  from the store, and use the wire frame from
  there.
• Because wire gets flimsier the longer you cut it,
  this method is best used for smaller arches.

3
Anchor the arch.

• Stick the ends of the arch into a bucket filled
  with gravel, pebbles, or sand. If you bought a
  pre-made arch from the store, it may already have
  a flat, base or platform. In this case, place
  something heavy, such as a brick or cinderblock
  on the base to weigh it down.
• Add a thin layer of colored sand or pebbles to
  your bucket. This will hide the plain sand or
  pebbles.
• Wrap bricks or cinderblocks in paper that matches
  your balloons. You can also paint them to match
  the base of your balloon arch.

4
Blow up four balloons with a balloon pump.

• They can all be the same color, or they can be
  different ones. Tie the tail end of each balloon
  into a knot as soon as you finish blowing it up.
  Try to make each balloon the same size.
• Use a regular pump for this method, not a helium
  tank.
• You don't have to use a balloon pump for this,
  but your lungs may get tired after a while.

5
Tie two balloons together by the tails in a
double-knot.

• If you are having trouble with this, you can tie
  the balloons together using string instead.
  Repeat this step for the remaining two balloons.
  You should now have two balloon pairs

6
Twist the balloon pairs together to make a clover
shape.

• Pull the balloon clover against the wire. Make
  sure that the wire is resting against the knot in
  the middle of the clover. Twist the two adjacent
  balloons together so that they close in front of
  the wire.
• You can also secure the balloons to the wire with
  string or colorful ribbon.

7
Repeat the process to make more rows.

• Blow four balloons at a time. Twist them into
  sets, then twist the sets together to make a
  clover. Slide the clover onto the wire, just
  above the bottom row of balloons, and secure it.
  Keep doing this until the wire is filled.

8
Contact Us
Company- Party Zealot Address- 12365 Barringer
St, South El Monte, CA 91733, USA Phone No.-
4156060033 Email- admin_at_partyzealot.com Website-
https//www.partyzealot.com Resource-
https//goo.gl/voKb2b
9
Thank You