Forklift Operator Training Sydney (1) - PowerPoint PPT Presentation

About This Presentation
Title:

Forklift Operator Training Sydney (1)

Description:

Workplace Training Centre NSW has a forklift training course which helps freshers to obtain a licence which covers all the requirements to work with a national High Risk Work Licence (Class LF) for forklifts. – PowerPoint PPT presentation

Number of Views:26
Slides: 9
Provided by: stevensmithwtc
Category:
Tags:

less

Transcript and Presenter's Notes

Title: Forklift Operator Training Sydney (1)


1
Forklift Operator Training Sydney
2
Is Forklift Training Necessary?
  • About 100 deaths each year
  • About 95,000 accidents each year
  • Such incidents are impacting the lives of workers
    and families in terms of physical suffering and
    mental suffering.

Without Forklift Training
3
Is Forklift Training Necessary?
  • With Forklift Licence Sydney
  • The proper forklift training will reduce, or even
    prevent, accidents from happening on the job
    site.
  • It'll also train operators on how to deal with
    elevated loads that can possibly tip the forklift
    over.
  • Prevent tip-over accidents by keeping the load as
    low as possible.

4
SafeWork NSW Conditions for Assessment
  • Applicants to be at least 18 years of age
  • Able to produce 100 points or more of
    identification as per the SafeWork NSW
    identification checklist.
  • Speak and understand English at a level to be
    able to participate in the training and
    assessment.

5
Learning Outcome
  • On completion of the forklift training course,
    participants will have gained the following
    skills and knowledge to
  • Plan Operations Hazard management and
    consultation
  • Pre-operational Inspections forklift and
    associated equipment
  • Shift Loads Lifting at varying heights and
    travelling through obstacles
  • Conclude Operations Parking, securing the
    equipment and following site specific procedures

6
Learning Outcome
  • Forklifts are more hazardous than most people
    usually perceive them to be
  • Pre-use inspections must be performed before each
    day or shift
  • It is important to understand how the load will
    affect the stability of the forklift
  • The operator must always be on the lookout for
    hazards and pedestrians

7
Location of Training
  • Training can be conducted at Workplace Training
    Centres facilities located in Arndell Park NSW.
  • Training can also be conducted on your site
    providing the following requirements are met 
  • Training room with tables, chairs and screen (or
    blank wall for a projector)
  • Suitable clear operating area
  • Forklift (in serviceable condition with no faults
    and operator manual present)
  • Low, Medium and High lifting levels, such as
    pallet racking with three varied types of loads

8
WorkplaceTrainingCentre 
Workplace Training Centre Pty Ltd 12/70 Holbeche
RoadArndell Park NSW 2148 Ph 02 9622 6060 Fax
02 9622 5660 Postal AddressPO Box
113Riverstone NSW 2765Email training_at_wtc.edu.a
u
Write a Comment
User Comments (0)
About PowerShow.com