Bluelog and eGauge Solar Monitoring Devices | Solar Protection Relay | ComAp IntelliPro

1
Solar monitoring

• EGAUGE  EG3000-016 AND BLUELOG X SERIES

2
EGAUGE EG3000-016

• eGauge is an energy monitoring device often used
  for measuring solar generation or power
  consumption.
• The eGauge lets you view electricity flow remotely
  as it can be accessed over the web. 

3
specifications

• Up to 12 Circuits on 3-phases (120V-480V,
  50-60Hz).
• 1 Accurate (Compliant to ANSI C12.1)
• This unit requires specific CTs to function. 
• Solid State Memory Records
• 1 second granularity for 10 minutes
• 1 minute average for 1 year
• 15 minute average for 30 years

4
specifications

• Data can be viewed on a remote device through the
  built-in web-server. The display is updated every
  second, giving immediate data on any load or
  generation changes. It records the most recent 30
  years of data in the built-in solid-state memory.
• Web connection - ethernet required (another model
  is available which uses ethernet over power)
• The measurements can be accessed via BACNet or
  can be pushed to a server via an xml API.

5
Bluelog x-series

• Bluelog is a Linux Bluetooth scanner with
  optional daemon mode and web front-end, designed
  for site surveys and traffic monitoring. Its
  intended to be run for long periods of time in a
  static location to determine how many
  discoverable Bluetooth devices there are in the
  area.
• The X-Series sets new standards in areas
  including safety, installation, maintenance,
  usability and networking of web portal, and data
  logger.

6
specifications

• Supply voltage 20 - 60 V DC
• Current consumption typically 5 W
• Operating temperature -20 - 70C
• Protection class IP 20
• Dimensions 110 x 148 x 63 mm
• Modem Ethernet connection (10 / 100 MBit)
• InstallationWall installation, Top-hat rail
  installation in electrical distribution board, in
  control cabinets

7
specifications

• Communication
• 2 x RS485/RS422 (auto-detection)
• 1 x CAN
• 4 x digital/analog inputs (dry contact, S0,
  voltage input (0 - 24 V, 0 - 1 V, 0 - 100 mV)
  current input (0 - 20 mA), PT1000, configurable
  via software).
• 4 x digital outputs (open collector max. 60 V/100
  mA or voltage output max. 200 mA configurable
  via software)
• 4 x digital inputs (dry contact, for e.g. ripple
  control receiver, S0, configurable via software)

8
BCJ Controls

• BCJ Controls is a solar technology company set up
  by ex-utility industrial sparkies. Between them
  they have a large amount of experience in
  electrical grid protection, as well as dealing
  with utilities on a day-to-day basis.

9
BCJ Controls

• Contact us
• [phone]
• Visit our website
• http//bcjcontrols.com.au/