ComAp Protection Relays and Generator Controllers | Solar Relay

1
ComApPROTECTION RELAYS AND GENERATOR CONTROLLERS

• Protection Relays Australia

2
COMAP INTELIGEN NT BASEBOX

• Comprehensive gen-set controller for both single
  and multiple gensets operating in standby or
  paralleling modes.
• To be used in conjunction with detachable colour
  displays InteliVision 5 or InteliVision
  8 Support of engines with ECU (Electronic
  Control Unit).
• Complete integrated gen-set solution and signal
  sharing via CAN bus minimum external components
  needed.
• Many communication options easy remote
  supervising and servicing.
• Gen-set performance log for easy problem
  tracingAutomatic synchronizing and power control
  (via speed governor or ECU).
• AMF function, Base load, Import / Export, Peak
  shaving, Voltage and PF control (AVR).

3
COMAP INTELIMAINS NT BASEBOX

• For multiple up to 31 gen-sets operating in
  parallel to mains (or isolated parallel).
• To be used in conjunction with detachable colour
  displays InteliVision 5, InteliVision 5 RD or
  InteliVision 8.
• Import/export power control of the gen-set group
  many different power control modes available.
• Reverse synchronization of the loaded gen-set
  group to mains.
• Coupling of several synchronized mains to a
  common bus. Allows to build complex applications
  with more mains incomers, bus-tie breakers etc.

4
COMAP INTELIMAINS NTC BASEBOX

• For multiple up to 31 gen-sets operating in
  parallel to mains (or isolated parallel).
• To be used in conjunction with detachable colour
  displays InteliVision 5, InteliVision 5 RD or
  InteliVision 8
• Many different power control modes
  availableSystem Baseload with limited export or
  minimal import
• Import/Export power control of gen-set group
• Temperature of the system by power control
• Dynamic changes of required system power via
  analog input
• Reverse synchronization of the loaded gen-set
  group to mains
• Forward synchronization of Mains to gen-set
  groupCoupling of several synchronized mains to a
  common bus
• Allows to build complex applications with more
  mains incomers, bus-tie breakers, load management
  etc.

5
COMAP INTELIPRO

• The ComAp InteliPro is often used as a
  Zero-Export Relay for solar applications.
• InteliPro is highly flexible mains decoupling
  relay with extensive range of protective
  functions to meet the strictest utility
  interconnection requirements. It can be used in
  various distributed generation applications,
  cogeneration units, renewable energy sources or
  as a redundant/back-up protection for gen-sets.

6
COMAP INTELISYS NTC BASEBOX

• Premium gen-set controller for both single and
  multiple gensets operating in standby or parallel
  modes
• Support of cogeneration (CHP) and other complex
  applications
• To be used in conjunction with detachable colour
  displays InteliVision 8 or InteliVision 5 
• Support of engines with ECU (Electronic Control
  Unit)
• Complete integrated gen-set solution and signal
  sharing via CAN bus minimum external components
  needed
• Many communication options easy remote
  supervising and servicing
• Gen-set performance log for easy problem
  tracingAutomatic synchronizing and power control
  (via speed governor or ECU)
• Baseload, Import / Export, Temp By Power, Peak
  shaving, Voltage and PF control (AVR)

7
COMAP INTELISYS NTC GAS GENSET CONTROLLER

• The InteliSys Gas is an industrial grade
  controller for gas generating sets mainly used in
  CHP (Cogeneration) and power generation
  applications. The InteliSys Gas controls,
  monitors and protects the generator set according
  defined set points and its configuration.
• Preconfigured functions, scalable and
  configurable I/Os, large built-in PLC
  interpreter, broad communication capabilities and
  an easy-to-change software allows to adapt the
  controller to various applications with minimum
  effort.
• The InteliSys Gas and its accessories gives you
  the perfect solution for your Gas generating set
  application. You will get the products and
  related services out of one hand.

8
COMAP INTELISYS NTC GAS GENSET CONTROLLER

• Complete control of the generating set, including
  engine, alternator and related technology from
  one device - saving costs and space in
  switchboard and represents single point of data
  storage for easier commissioning and
  troubleshooting.
• Predefined gas engine specific functions saves
  your time during the system configuration.
  Interface to both mechanical engines via sensors
  (resistive, voltage, current) and electronic
  engines with ECU type of control. One controller
  can handle various types of engines.
• Interface to ECUs and other on-engine products
  like Ignitions, Mixers, Speed Governors,
  Detonation controllers significantly improves the
  system diagnostics and helps to save the engine
  down-time period.

9
COMAP INTELISYS NTC GAS GENSET CONTROLLER

• Compliant to various Grid codes requirements,
  including ENTSO-e without need for an extra
  Protection relay. This saves your money, space in
  the switchboard and keeps the system simple.
• Local and Remote monitoring of the complete
  controlled technology over Plug Play Displays,
  PC tools and Web based Fleet monitoring tools
  significantly reduce system commissioning time
  and allows you to monitor your gen-set fleet
  constantly.
• Large built-in PLC interpreter allows you to
  configure the needed logic (e.g. CHP) on your own
  without extra programing knowledge. This allows
  you to react quickly to customer requirements and
  keep your valuable know-how in your hands.

10
COMAP INTELISYS NTC HYBRID SYSTEM CONTROLLER

• InteliSys NTC Hybrid is a controller for
  applications that combine gen-sets with a
  renewable source of power. It continuously
  monitors data from all sources of energy
  including solar, wind, gen-sets and batteries.
• The Dynamic Spinning Reserve function allows the
  controller to adjust the output from the gen-sets
  according to the output of the renewable source.
  So, if the power output from the renewable source
  begins to drop, the controller automatically
  starts the gen-sets to ensure no drop in energy
  production from the system.
• InteliSys NTC Hybrid communicates over CAN bus
  with ComAp gen-set controllers which manage
  outputs from gen-sets of different installed
  capacity and various manufacturers. Smart power
  management automatically select the most
  efficient combination of gen-sets based on their
  sizes to maximize fuel savings.
• InteliSys NTC Hybrid provides interface to
  phovoltaic inverters with respect to the gen-sets
  minimum loading level. If the gen-set output
  approaches the allowed minimum, the InteliSys NTC
  Hybrid regulates the inverter output to prevent
  the engine from running underloaded.

11
COMAP INTELIVISION HMI 12.1IN DETACHABLE COLOUR
DISPLAY

• InteliVision 12Touch, industrial operator panel
  equipped with 12,1 colour, multi-touch screen,
  is dedicated together with the main ComAp
  controller to visualise and control single
  gen-set in various applications.
• 12,1" colour, multi-touch screen, TFT display
  unit with resolution of 1280 x 800 pixels
• Touch based Graphical User Interface, support for
  multi-touch gestures
• Plug and Play operation (auto configuration based
  on controller application)

12
COMAP INTELIVISION HMI 12.1IN DETACHABLE COLOUR
DISPLAY

• Supported controllers
• InteliSys GAS
• InteliGen NT BaseBox
• InteliGen NTC BaseBox
• InteliSys NTC BaseBox
• InteliMains NTC BaseBox
• InteliSys NTC Hybrid
• Complete access to all control and monitoring
  functions. Fast and intuitive navigation

13
COMAP INTELIVISION HMI 17IN COLOUR TOUCH DISPLAY

• The new InteliVision 17Touch is 17 Touchscreen
  display unit designed for complete monitoring and
  control of multiple controllers or cogeneration
  installation.
• HARDWARE FEATURES
• 17" touch SXGA (1280x1024) TFT LCD Display with
  LED backlight
• Intel Celeron 827E Processor, Fanless Cooling
  System
• IP-65 NEMA 4 Aluminum Die Cast Front Bezel
• Two easy access front USB ports
• Over and under voltage protection
• Polarity protection
• Extended temperature range from -20 up to 60
• UL certified

14
COMAP INTELIVISION HMI 17IN COLOUR TOUCH DISPLAY

• SOFTWARE FEATURES
• InteliMonitor / IGS-LOG (included for free)
• Multiple controllers monitoring
• Mode change feature for any connected controller
• Start/Stop any connected gen-set manually
• Control/Monitor of all GCBs / MCBs controlled by
  ComAp units
• Set points configurable from one device
• History logs of all controllers
• Full screen mode with lock protection / PIN
• Onscreen keyboard

15
COMAP INTELIVISION HMI 5.7IN TFT COLOUR DISPLAY

• InteliVision 5, industrial operator panel
  equipped with 5,7 colour screen, is dedicated
  together with the main ComAp controller to
  visualize and control single gen-set in various
  applications.
• 5,7 Colour TFT Display with resolution 320 240
  pixelsLocal and Remote display for single
  controller monitoringPlug and play operation
  (auto configuration based on controller
  application)

16
COMAP INTELIVISION HMI 5.7IN TFT COLOUR DISPLAY

• Supported controllers
• InteliSys GAS
• InteliGen NT BaseBox
• InteliGen NTC BaseBox
• InteliSys NTC BaseBox
• InteliMains NTC BaseBox
• InteliSys NTC Hybrid

17
COMAP INTELIVISION HMI 8IN TFT COLOUR DISPLAY

• InteliVision 8, industrial operator panel
  equipped with 8 colour screen, is dedicated
  together with the main ComAp controller to
  visualize and control single gen-set in various
  applications.
• 8" colour TFT display with resolution of
  800 x 600 px
• PLUG and PLAY operation (auto configuration based
  on controller application)

18
COMAP INTELIVISION HMI 8IN TFT COLOUR DISPLAY

• Supported controllers
• InteliGen NT BaseBox
• InteliGen NTC BaseBox
• InteliSys NTC BaseBox
• InteliMains NTC BaseBox
• InteliSys NTC Hybrid
• InteliDrive DCU
• InteliDrive DCU Marine
• InteliDrive Mobile
• InteliDrive Mobile Logger

19
COMAP MAINSPRO

• The ComAp MainsPro is a solar protection relays
  suitable for anti-islanding protection for
  installations over 30kW.
• The ComAp MainsPro is a protection relay for
  mains-to-parallel applications, including
  generator sets, cogeneration, micro turbines or
  renewable energy sources such as photovoltaic
  plants or wind turbines.
• It provides adjustable voltage, frequency and
  loss of mains protections to safeguard both the
  distribution network and the generators.

20
For More Info About Our ProductsVisit us here
www.protectionrelays.com.au