Title: The Best DIY Tutorial for Installing a Gas Stove Using Correct Connector
1Welcome To Vatsalya Metal
2The Best DIY Tutorial for Installing a Gas Stove
Using Correct Connector
If you afraid to hook up a gas appliance at home,
then you should be! It is because leakage of gas
at your home can be a disastrous thing. Brass
connector manufacturers bring this article for
you to explain how you can install a gas stove
using right tools and components like a pro. To
know the right way to connect and link a range
and a water heater to the gas line, read this
article. This is a simple task that can be
completed in a day. You don't need huge money for
this project.
3To hook up a gas range
- Pull out the range
- Shut off the gas cock
Hooking up a water heater or gas range is a
simple job that only needs basic tools and
readily available supplies, including brass
connectors. When you use and apply right
materials and follow instructions appropriately,
you can perform like a pro and save your
money. You can hook up a gas range using a
flexible, corrugated connector or using threaded
black steel pipe for water heater. You can avail
these products at most home centers and hardware
stores.
4(No Transcript)
5- The critical thing for safe installation is to
get the right connector. How to do it? Lets
check out these tips shared by experts- - You must get a connector that has marking. The
mark will tell you for which appliance this
connector can be used. There are two types of
marking available on connectors- "range" and
"dryer". Range connector is ½" in diameter, while
dryer connector is 3/8" in diameter. - Buy a connector that has end connector fittings.
A normal gas line coming into your home kitchen
will be ½" black threaded pipe, and the
connection to the stove will be either having a
female fitting or male fitting. - Use a connector that has enough length.
6- Never reuse a flexible connector. If you get a
new appliance, get its connector also. It is
important to follow guidelines shared by the
professionals to install the connector in right
way. - Be careful and don't force the corrugated
connector into sharp bends. - It is important to check for leaks. You can buy
gas leak detecting tools from home centers,
hardware shops and online. - It is always better to call professionals if you
don't know how to install a gas stove.
Get quality assured connectors from brass
connector manufacturers. Contact them and avail
the best deals.
7Our Products
8Contact Us
9(No Transcript)