How to professionally lay tiles using chemical admixtures at home

1
How to professionally lay tiles using chemical
admixtures at home
2
(No Transcript)
3
A lot of us enjoy carrying out home improvement
projects. There are some really simple projects
that even the inexperienced can carry out with
absolute ease while there are others that require
professional help. Here well tell you how to lay
a ceramic tile like a professional.
4
The ceramic tile floors are exceptionally
durable. They do the value addition to the home.
It is usually a good idea to use ceramic tiles
in entryways, kitchens and bathrooms since they
are very easy to clean. The first step in this
is selecting the right ceramic tile for your
house. This is definitely going to be the most
difficult part of the entire project. Next
youll need high quality chemical admixtures,
preparation products, and grout as well as tile
spacers. You can talk to the store manager
wholl assist you in better selection of products.
5
Further youll need to gather the tools that
youll require in the process. Some common
tools that youll need are tape measure, clean
bucket, Ceramic tile adhesive spreader, sponge,
steel rule, pencil and tile cutter. Now, before
you start with the laying of the tile you will
have to ensure that the old surface is clean.
6
Next you can decide your beginning point and mark
a perpendicular near it with a chalk. Begin
from the entrance and lay a row of tile without
the application of any adhesive. Keep it along
the chalk line. Make use of spacers in order to
keep the distance between the tiles uniform. When
you are done covering the entire area like that
you are ready to lay the tile. Spread the
adhesives on the surface. Youll now have to work
the tile into the adhesive. Add place spacers
between these in order to keep the tiles evenly
spaced. Once the tile is laid place a level on
it. You can use a rubber mallet in order to
gently flush them into place. Go on in this
manner back and forth all throughout the room.
Next you can let the adhesive dry overnight.
Following day try and carefully walk on the tile.
Youll now have to cut as well as lay the borders.
7
Add half an inch spacer against the wall and lay
a full tile against the spacer. You can even
out the edges of the first tile and mark a line
across it using a cutter. Next lay the tile
towards the edge of the table or the workbench
and snap it off. After the tiles have been laid
and the adhesive has been set it is time to move
to grouting. This is necessary to fill the
spaces between the tiles. You can use a rubber
float to apply the material. Ensure that grout
has been spread in all empty spaces. Clean off
the residue from around the area. After a week
has passed brush on a silicone sealer to tighten
the grip. Your new ceramic tile floor is ready.
8
Thank You
www.roff.in