Solu Tube - Water Soluble Soap Sticks from Aquasol Welding - PowerPoint PPT Presentation

About This Presentation
Title:

Solu Tube - Water Soluble Soap Sticks from Aquasol Welding

Description:

SoluTube is an EPA Approved, hollow, spiral wound type of water soluble packaging used to encase a variety of substances including powders, salts, sands, candle wax, detergents and surfactants. One of the most common applications of SoluTube is encasing surfactants to release gas from inside wells. – PowerPoint PPT presentation

Number of Views:77

less

Transcript and Presenter's Notes

Title: Solu Tube - Water Soluble Soap Sticks from Aquasol Welding


1
SoluTube WATER SOLUBLE SOAP STICK TUBES THE
PREFERED SURFACTANTDELIVERY METHOD       
MADE IN THE USA
2
About
  • SoluTube is an EPA Approved, hollow, spiral wound
    type of water soluble packaging used to encase a
    variety of substances including powders, salts,
    sands, candle wax, detergents and surfactants.
    One of the most common applications of SoluTube
    is encasing surfactants to release gas from
    inside wells.
  • Water accumulates in natural gas wells as they
    age, preventing the gas from rising. To maximize
    the life and gas production of the well, the
    water must be extracted or altered to allow gas
    production to resume.
  • Download product brochure here
    http//www.aquasolwelding.com/wp-content/uploads/2
    014/09/water-soluble-paper-tape-brochure.pdf

3
  • One of the most cost efficient methods for
    enabling the gas to flow freely again is to add a
    surfactant to the water, converting the liquid
    into foam. The method in which the surfactant is
    delivered is fundamental to the cost and labor
    efficiency.
  • Aquasol Water Soluble Paper can be formed into a
    tube, filled with the surfactants then dropped
    into a gas well to deliver surfactants to the
    bottom of the well. The process can be further
    enhanced by using a Soap Stick Launcher.

4
  • In the not too distant past, vast quantities of
    chemical solutions had to be poured down the well
    to reach deep, underground sources. This method
    is inefficient and costly when compared to using
    the water soluble paper soap stick method.

5
Features and Benefits
6
  • Non-Stick Surface
  • Soap stick tubes made of materials other than
    Aquasol Water Soluble Paper release moisture over
    time and stick to one another in the soap stick
    launcher.
  • Disruptions in delivery of the surfactants to the
    well increase labor to remedy the problem.
  • Only SoluTubes have a non-stick surface, ensuring
    continuous launching of soap sticks.
  • Safe, Durable and Ready to Use
  • SoluTubes eliminate direct handling of
    surfactants. Soaps and detergents should be
    handled with caution.
  • SoluTube is a durable water soluble paper
    covering, minimizing stick breakage during
    transport
  • SoluTube, composed of Aquasol Water Soluble
    Paper, is EPA approved

7
  • Biodegradable
  • SoluTubes are made of Sodium Carboxy Methyl
    cellulose and wooden pulp, non-toxic and
    biodegradable compounds that leave no residue in
    the well.
  • Efficient and Economical
  • Eliminate using expensive well service operations
    such as swabbing, jetting with coiled tubing, or
    installing artificial lift and siphon strings.
  • Normally dissolve in 20 to 80 minutes depending
    on temperature, salt content, and relative water
    motion in the well.
  • Can dissolve in as little as 5 to 15 minutes
    depending upon the substance encased
  • Simple Storage Requirements
  • Will not dissolve while in cool, dry and
    ventilated storage

8
How SoluTube Works
9
  • Soap sticks can be unloaded one at a time or
    continuously through a Soap Stick Launcher.
    Single treatments are best suited to wells that
    require liquid unloading on an infrequent basis.
    A disadvantage of this method is operator time to
    load and inconsistent time between loading. The
    Soap Stick Launcher however allows continuous
    treatment at timed intervals enabling soap sticks
    to be launched unattended.
  • General Instructions
  • Shut-in the well and drop sticks through a
    lubricator
  • Wait 45 seconds until sticks contact top of fluid
    then slowly return well to normal production
  • Repeat procedure if or when it becomes necessary

10
Types and Sizes
  • Sizes
  • SoluTube Soap sticks range in size from 3/4? to
    2? in diameter. Smaller size soap sticks are used
    when minimal amounts of surfactant are
    needed.Types of Surfactants
  • Soap sticks can be made of one surfactant or a
    blend of surfactants. All soap sticks are used to
    remove water and condensate from gas wells and
    increase gas production. Consult with your soap
    stick manufacturer to create or select the blend
    that meets your specific needs (temperature
    resistance, volume of water, etc.).Packaging
  • Soap sticks are packaged in plastic chests,
    plastic tool boxes, cardboard cartons and drums.
Write a Comment
User Comments (0)
About PowerShow.com