Implementation of an in campus fire alarm system using Zigbee || 2015-2016 IEEE Embedded Project Training - PowerPoint PPT Presentation

About This Presentation
Title:

Implementation of an in campus fire alarm system using Zigbee || 2015-2016 IEEE Embedded Project Training

Description:

Implementation of an in campus fire alarm system using Zigbee || 2015-2016 IEEE Embedded Project Training Contact: IIS TECHNOLOGIES ph:9952077540,landline:044 42637391 mail:info@iistechnologies.in – PowerPoint PPT presentation

Number of Views:144

less

Transcript and Presenter's Notes

Title: Implementation of an in campus fire alarm system using Zigbee || 2015-2016 IEEE Embedded Project Training


1
Implementation of an in campus fire alarm system
using Zigbee
  • Presented by
  • IIS TECHNOLOGIES
  • No 40, C-Block,First Floor,HIET Campus, North
    Parade Road,St.Thomas Mount, Chennai, Tamil Nadu
    600016.
  • Landline044 4263 7391,mob9952077540.
  • Emailinfo_at_iistechnologies.in,
  • Webwww.iistechnologies.in

2
Abstract
  • Nearly all our buildings and workspaces are
    protected against fire breaks, which may occur
    due to some fault in the electric circuitries and
    power sources.
  • The immediate alarming and aid to extinguish the
    fire in such situations of fire breaks are
    provided using embedded systems installed in the
    buildings.
  • But as the area being monitored against such fire
    threats becomes vast, these systems do not
    provide a centralized solution.
  • For the protection of such a huge area, like a
    college campus or an industrial park, a
    centralized wireless fire control system using
    Wireless sensor network technology is developed.
  • The system developed connects the Two dangers
    prone zones of the campus with a central control
    room through a Zigbee communication interface
    such that in case of any fire break in any of the
    building, a direct communication channel is
    developed that will send an immediate signal to
    the control room.
  • In case if any of the emergency zone lies out of
    reach of the central node, multi hoping technique
    is adopted for the effective transmitting of the
    signal.

3
Abstract
  • The Two nodes maintains a wireless interlink
    among themselves as well as with the central node
    for this purpose.
  • Moreover a hotter is attached along with these
    nodes to notify the occurrence of any fire break
    such that the persons can leave the building
    immediately and with the help of the signal
    received in the control room,
  • the exact building where the fire break occurred
    is identified and fire extinguishing is done.
  • The real time system developed is implemented in
    PIC with temperature, fire and humidity sensors
    and Zigbee module.

4
Services Offered
  • Prototype KIT with Softwares
  • Documents
  • Video File
  • Skype classes(Online Support)
  • Team viewer Support(Online Support)
  • Future Enhancement
  • Paper writing
  • Support For Inter-National Conference paper
    publication.

5
Contact
  • IIS TECHNOLOGIES
  • No 40, C-Block,First Floor,HIET Campus, North
    Parade Road,St.Thomas Mount, Chennai, Tamil Nadu
    600016.
  • Landline044 4263 7391,mob9952077540.
  • Emailinfo_at_iistechnologies.in,
  • Webwww.iistechnologies.in,
Write a Comment
User Comments (0)
About PowerShow.com