Title: How to conduct energy analysis in Revit with the support of building elements?
1BIM Services India
Visit Us http//www.bimservicesindia.com/ Email
Us projects_at_bimservicesindia.com
- How to conduct energy analysis in Revit with the
support of building elements?
2How to conduct energy analysis in Revit with the
support of building elements?
- Highly helpful tools are contained in Revit
which are too crucial for architects, engineers
and modelers for conducting energy analysis on
the basis of vital building elements such as
doors, walls and roof etc. - In other words energy analysis of the entire
building can be conducted only on the basis of
building elements since Revit has effective
mechanism which can effectively evaluate these
elements and can find out there performance on
the basis of their composition. - Apart from energy settings, Revit users can
employ additional building information in the
energy analytical model for obtaining effective
outcomes.
3How to conduct energy analysis in Revit with the
support of building elements?
- Process of performing energy analysis in Revit
- First of all users are required to develop a
building model (BIM model) in the digital
environment of the building design software
Revit. - After words users are required to establish
building elements to base their energy analysis
on them. - For doing so they are required to click Analyze
tab after which they should go to energy
analysis panel and finally click Use Building
Element Mode icon from there. - After clicking Use Building Element Mode users
are required to determine building type as well
as its location.
4How to conduct energy analysis in Revit with the
support of building elements?
- For doing so they are again required to click
Analyze tab after which they should go to
Energy Analysis panel and then click Energy
Settings. - Once energy settings are clicked users are now
required to provide appropriate value for
building type and for the location of the
building. - And for doing so it is important that users
indulge into reviewing occupancy type that is
provided for the building which can be
effectively modified as per requirement, when it
comes to specifying building type. - For building location, Revit users should examine
the location of the project in question and then
modify it as per their requirement.
5How to conduct energy analysis in Revit with the
support of building elements?
- Once energy analytical model is created by users
they should then run energy simulations by
clicking on Run Energy Simulation icon which is
located in Energy Analysis panel. - This step should be followed by providing a name
to the simulation, which can be done by
approaching Run Energy Simulation dialog. - Once the software completes energy analysis it
promptly displays an alert indicating to users
about the completion of analysis. - For reviewing its results users are required to
click on the name of the analysis which is listed
in the alert. - Results of the analysis can also be checked by
users by going to Results and Compare dialog.
6Contact Us
Canada P 1 416-907-9430projects_at_teslacadd.com
USP (914) 944 3377projects_at_jbhtesla.com
AustraliaO 03 8528 1894M 04 3174
5425projects_at_teslacad.com.au
IndiaP 91-79-66170072 projects_at_teslacadd.com
UKP 03330119045projects_at_teslacad.co.uk