DIY Jewelry Making Tips – How to Make Braided Bracelet - PowerPoint PPT Presentation

View by Category
About This Presentation
Title:

DIY Jewelry Making Tips – How to Make Braided Bracelet

Description:

Let WigJig be your own jewelry making coach! Gary Helwig, the WigJig jewelry making designer offer jewelry making tips and jewelry making tools/supplies for beginners and experts. Visit – PowerPoint PPT presentation

Number of Views:168

less

Write a Comment
User Comments (0)
Transcript and Presenter's Notes

Title: DIY Jewelry Making Tips – How to Make Braided Bracelet


1
(No Transcript)
2
  • Bracelet on a beautiful hand speaks volumes about
    the persona of a woman wearing and her exotic
    sense of dressing.
  • If you love wearing bracelets, then there is good
    news for you i.e. now you can learn the
    techniques of how to craft braided bracelets for
    free without leaving your home.

3
  • Put your creativity to work and save tons of
    money by learning how to make your own bracelets
    with WigJig jewelry making instructions and tips.

4
  • Gather Your Jewelry Making Supplies
  • Jewelry Making Wire of 24 Gauge (3 Different
    Colors such as red, white, and yellow.)
  • 1 Filigree Clasp For A Single Strand Bracelet and
    Two Medium Jump Rings
  • Masking Tape Or Other Non-Marking Tape
  • Nose plier and cutter

5
  • Tie a knot at the top of the string, leaving
    about one inch (2.5 cm) of string above the knot.
  • Secure the top of the bracelet just by holding it
    between the fingers or by taping or pinning it to
    a surface and start braiding. Braid the bracelet
    exactly as you would braid hair. Don't allow the
    two wires of the same color cross one another.

6
  • Continue braiding until you've braided an entire
    bracelet. Once you've found the desired length of
    your bracelet, tie the end in a knot, leaving an
    inch of string.
  • Now grasp the end of the braided segment with
    nose pliers and bend the 6 wires about 75
    degrees.

7
  • Tie the two ends of the wire together. Use jump
    ring to connect the clasp to the loop in the end
    of the braided wire that you just completed.

8
  • Gently bend the braided wire into a round shape
    either using a bracelet mandrel or by hand. This
    completes this braided bracelet jewelry making
    project.
  • Now you wrap it around your wrist and start
    showing it off.

9
  • Ready, set, shop! Let WigJig be your own jewelry
    making coach! Gary Helwig, the top WigJig jewelry
    making designer offer jewelry making tutorials,
    tips and jewelry making supplies for beginners
    and experts.

10
  • Get instructions for making Braided Wire Bracelet
    out of jewelry wire and jewelry supplies using
    WigJig jewelry tool.
  • Visit www.wigjig.com/jewelry-designs
  • Call 210-556-1743
About PowerShow.com