Easy Way to adding or removing a Cisco 3750 stack

1
How to adding or removing a Cisco 3750 stack

• http//www.router-switch.com/
  

2
Why need add or remove cisco switch stack

• "How to add or remove a Cisco switch while the
  stack stays on?" This is most network users want
  to know. When using a Cisco 3750 stack connected
  through stackwise technology you can add or
  remove a Cisco switch while the stack stays
  on.And the most important thing before adding or
  removing a switch from the stack,is to make the
  switch off.

3
What's the Cisco StackWise technology?

• It's a tacking architecture optimized for Gigabit
  Ethernet with 32-Gbps interconnect throughput.
  Cisco StackWise technology unites up to nine
  individual Cisco Catalyst 3750 switches into a
  single logical unit, using special stack
  interconnect cables and stacking software.A
  working stack can accept new members or delete
  old ones without service interruption.

4
Follow the easy steps on adding a switch to the
stack

• 1.On the new switch give the global command
  switch stack-member-number provision type
• When adding for example a third Cisco switch to
  the Cisco stack, use the following command
• switch 3 provision ws3750g-24t
• 2.Power off the new stack member
• 3.Connect the new member to the Cisco stack using
  the stacking cables, 1 loop at a time.
• 4.Power on the new stack member. The switch will
  come alive and will receive the Cisco IOS version
  from the master, when that is completed it will
  be ready to service network requests.

5
Easy steps on how to remove a member switch from
the stack

• 1.Power off the stack member to be removed.
• 2.Remove the stackwise cable from the switch.
• 3. Issue the following command on the stack
  master no switch stack-member-number provision
  type

6
Contact Us

• Website http//www.router-switch.com/
• Tel [phone] (USA) 852-9795-4940 /
  852-3174-6166 (Hong Kong)
• Fax [phone] (Hong Kong)
• Email cisco_at_router-switch.com (Sales Inquiries)