Different Terminology related to Air Handling - www.acmeairequipments.com

1
(No Transcript)
2
Pneumatic conveying
Pneumatic conveying involves the transfer of
powders, particles, granules and other materials
through enclosed pipelines. It involves combining
different pressures and flow of gases such as
nitrogen to make the movement process a success.
3
Central vacuum cleaning

• Central vacuum cleaning involves the removal of
  dirt and debris from buildings. The dust
  particles are sent through a tubing network
  installed within the walls to a collection
  centre. Central vacuum cleaning is done by using
  a vacuum cleaner.
• The cleaner has a power unit permanently fixed
  and a collection container where dust particles
  are collected. Inlets are then installed
  throughout the building attaching power hoses to
  the vacuum accessories which remove the dust from
  the building.

4
Roots blower and compressors

• Roots blower and compressors operate through
  complex processes where fluid is pumped with
  meshing lobes. The fluid is held in pockets
  surrounding the lobes. From there they are
  carried to the exhaust.
• Most root blowers or compressors are capable of
  pumping large volumes of but since they cannot
  achieve maximum compression, most of the time you
  find the multiples of them with intercoolers.

5
Vacuum booster

• Vacuum booster allows air to be sucked out of
  the booster through the checking valve. This
  valve is very important since it make sure that
  even if air leaks, it does not enter the vacuum
  booster.
• Since the booster has to provide enough power
  for the driver to make several stops in case the
  engine stops running without losing the braking
  power.

6
Vacuum pump
Pneumatic conveying involves the transfer of
powders, particles, granules and other materials
through enclosed pipelines. It involves combining
different pressures and flow of gases such as
nitrogen to make the movement process a success.
7
Dust collection

• Dust collection involves the improvement of air
  quality and safety through removal of dust
  particles from the air or the environment.
• Dust collection is achieved through the
  principles of capture, convey and then collect
  with dust collector system. The dust is first
  captured from its source it is then conveyed
  through the ducting system and finally collected.

8
Aeration in storage silos

• Aeration in storage silos is done in order to
  provide a continuous discharge of materials such
  as dust particles. This is done through the use
  bulk materials release systems.
• The systems must be designed effectively in
  order to ensure there is continuous flow so as to
  provide for proper emptying of the storage
  facility and reduce the residue materials left in
  the silos.

9
Dewatering
Dewatering is the removal of water from solid
materials through a process of wet
classification, filtration, centrifugation or
other separation processes. Dewatering can be
done in a construction site, a riverbed or a mine
shaft. The process is achieved through pumping or
evaporation.
10
Air-drying
Air-drying is the process through which the
amount of steam is decreased from the air by
using several methods. The process of air-drying
is achieved through various processes, which
include lowering the air temperature, heating and
ventilation, condensation drying and lastly
sorption drying.
11
Contact Us
Acme Air Equipments Company Pvt. Ltd. Plot - 57
/ 3, 4, 5, Phase I, B. Road, GIDC,
Vatva, Ahmedabad - 382445 Gujarat, India Phone-
91 98240 60792 Email info_at_airequipments.com
12
ACME AIR EQUIPMENTS CO. PVT . LTD.

THANK YOU