Athukorala, Prema-chandra (2006) Product Fragmentation an - PowerPoint PPT Presentation

1 / 34
About This Presentation
Title:

Athukorala, Prema-chandra (2006) Product Fragmentation an

Description:

Athukorala, Prema-chandra (2006) Product Fragmentation and Trade Patterns in ... Example: Barbie Doll. 5. Barbie Doll. A product' of. Mettels Inc, a US-based MNEs ... – PowerPoint PPT presentation

Number of Views:102
Avg rating:3.0/5.0
Slides: 35
Provided by: U446
Learn more at: http://www.icrier.org
Category:

less

Transcript and Presenter's Notes

Title: Athukorala, Prema-chandra (2006) Product Fragmentation an


1
Production Fragmentation and Trade Patterns in
Asia
Prema-chandra Athukorala Division of Economics
Research School of Pacific and Asian
Studies Australian National University Prema-chand
ra.athukorala_at_anu.edu.au
2
  • This presentation draws upon
  • Athukorala, Prema-chandra (2006) Product
    Fragmentation and Trade Patterns in East Asia,
    Asian Economic Papers, 4(3), 1-27.
  • Athukorala, Prema-chandra (2007a) Singapore and
    ASEAN in the New Regional Division of Labour,
    Singapore Economic Review (forthcoming).
  • Athukorala, Prema-chandra (2007b),
    Multinational Production Networks and the New
    Geo-economic Division of Labour in the Pacific
    Rim Countries in Juan Palacious (ed.), New
    Geo-economic Division of Labour in the Pacific
    Rim, London Routledge (forthcoming).
  • Avaiable at http//rspas.anu.edu.au/athu/

3
  • Structure
  • Introduction Purpose and scope
  • International product fragmentation An
    Introduction
  • Quantifying product fragmentation
  • Trends and patterns of fragmentation trade
  • Production fragmentation and trade patterns
  • Conclusion/inferences

4
1. Introduction Purpose and Scope
  • What is International product fragmentation?
  • The geographic separation of activities
    involved in producing a good (or service) across
    two or more countries
  • Alternative terms
  • Vertical specialization
  • intra-product specialization
  • Slicing the value chain
  • International production sharing
  • Outsourcing
  • intra-mediate trade
  • Example Barbie Doll

5
Barbie Doll
  • A product of
  • Mettels Inc, a US-based MNEs
  • But, produced in factories in Hong Kong and China
  • with,
  • hairs from Japan,
  • paints and decorations from US,
  • cotton cloth from China, and
  • labour in final assembly from Hong Kong and
    China
  • Sold world-wide at the rate of two dolls every
    second under the trade name of Mettels Inc.

6
  • Why Production Fragmentation deserves especial
    attention in trade policy debate?

7
Why Production Fragmentation deserves especial
attention in trade policy debate?
  • Opens up new opportunities for export-led
    industrialisation in developing countries (a
    challenge to the fallacy of composition argument
    against export-led industrialization)
  • Reinforces the linkage between trade and FDI
    policies.
  • Makes a strong case for the removal/harmonisation
    of non-border policy barriers with a view to
    enhancing gains from global integration
  • Has implications for the debate on regional
    versus multilateral (global) economic integration
    approaches to international trade policy making
    (This is the prime focus of this presentation)

8
  • What do I intend to do in this presentation?
  • Examine the extent, trends and patterns of
    fragmentation-based trade (with emphasis on Asia)
  • Discuss implications of this new form of
    international specialisation for analysing
    international trade patterns
  • Hypothesis
  • In a context where fragmentation-based
    international specialisation is growing rapidly,
    the conventional trade flow analysis, which is
    based on the (implicit) assumption that countries
    always trade in goods, can lead to misleading
    inferences about economic integration through
    trade.
  • - Multiple border crossing of parts and
    components
  • - Differences between inter- and intra-regional
    patterns of fragmentation trade and final trade

9
2. The Process of International Production
Fragmentation
  • The geographic separation of activities involved
    in producing a good (or service) across two or
    more countries
  • Not an entirely new phenomenon, but began to
    expand rapidly only from about the late 1960s
  • The process started in the electronics and
    subsequently and spread into many other
    industries such as sport footwear, automobile,
    televisions and radio receivers, sewing machines,
    office equipment, electrical machinery, power and
    machine tools, cameras and watches, and printing
    and publishing.

10
  • Initially the process involved locating small
    fragments of the production process in a low cost
    country and reimporting the assembled components
    to be incorporated in the final production in the
    home country.
  • Over time,
  • - production networks have begun to encompass
    many countries involving in the assembly process
    at different stages, resulting in multiple-border
    crossing of product fragments before getting
    incorporated in the final product.
  • - some fragments of the production process in
    certain industries have become standard
    fragments which can be effectively used in a
    number of products (eg cellular batteries,
    electronic chips)

11
  • Multinational enterprises (MNEs) are the key
    players.
  • - a close relationship between foreign direct
    investment (FDI) and trade in parts and
    components (henceforth referred to as
    fragmentation-based trade).
  • However, in recent years, fragmentation practices
    have begun to spread beyond the domain of MNEs
  • - As production operations in host countries
    become firmly established, MNE subsidiaries have
    begun to subcontract some activities to local
    (host-country) firms to which they provide
    detailed specifications and even fragments of
    their own technology.

12
  • - Many firms which are not part of MNE networks
    have begun to procure components globally through
    arms-length trade.
  • - Many MNEs in electronics and related
    industries now rely increasingly on independent
    contract manufacturers for the operation of
    their global-scale production networks (a
    process that has been facilitated by the
    standardisation of some components)

13
  • Three mutually reinforcing factors have
    contributed to the rapid expansion production
    fragmentation
  • Advancement in production technology, enabling
    the industry to slice up the value chain into
    finer components.
  • Technological innovations in communication and
    transportation that have contributed to
    significant reduction in the cost of service
    links involved in coordinating international
    operations (See Jones et al 2005 for a
    theoretical exposition)
  • Liberalisation policy reforms in both home and
    host countries

14
3. Quantifying Product Fragmentation in World
Trade
  • Three methods
  • Using input-output framework (to estimate the
    degree of dependence of manufacturing industries
    on imported input)
  • (eg Hummels et al 2001)
  • Using data from records maintained by developed
    countries under tariff provisions for overseas
    assembly (eg. Egger and Egger 2005)
  • Separating parts and components from final
    products using trade data for individual
    countries from the UN trade data reporting system
    (Comtrade database)
  • (This is the approach used here)

15
  • Data are extracted at the 5-digit level of the
    Standards International Standard Trade
    Classification (SITC), Rev 3
  • Focus on manufacturing trade - SITC 5 though 8
    net of SITC 68
  • Parts and components are separately reported at
    the 5-digit level) from for
  • Sector 7 Machinery and transport,
  • and
  • some items of SITC Sector 8 (miscellaneous
    manufacturing)

16
  • Data tabulation is based on importer records
  • Time period 1992-2004
  • Cavitate
  • Coverage of pats and components in SITC Rev 3 is
    incomplete
  • Therefore, estimates presented in the paper
    understate the magnitude of fragmentation trade

17
Trends and Patterns of Fragmentation Trade
  • Trade in parts and components (fragmentation
    trade) has grown faster than total world
    manufacturing trade
  • This pattern in much more prominent in trade in
    machinery and transport equipment (SITC 7) (which
    accounts for more than half of total
    manufacturing trade)
  • See Figures 1 and 2

18
Figure 1 World Manufacturing Trade Total
Trade, Trade in Parts and Components (PCs) and
PC share in total trade
19
Figure 2 World Trade in Machinery and Transport
Equipment (MT) Total Trade, Trade in Parts and
Components (PCs) and PC share in total trade
20
  • Profile of fragmentation trade
  • Table 1 Production Fragmentation in World
    manufacturing Trade, 1992/3 and 2004/5 ()
  • Table 2 Percentage Composition of Parts and
    Components Exports and Imports by two-digit SITC
    Categories1, 2004/5
  • Table 3 China and India in Parts and Components
    Trade 1992/3, 1999/0 and 2004/5

21
  • Key Points
  • Growth of fragmentation trade in East Asia has
    been much faster compared to total world trade
    and trade of NAFTA and EU.
  • The degree of dependence of East Asian countries
    as a group on fragmentation trade is much higher
    by world standards.
  • The dependence of AFTA countries on fragmentation
    trade is much greater compared to other East
    Asian countries
  •  

22
  • The formation of NAFTA and EU enlargement has not
    diminished developing East Asias pre-eminence in
    fragmentation-based specialization.
  • China is becoming an important player in regional
    fragmentation trade network
  • India (and South Asia) is still a minor player in
    fragmentation-based international exchange

23
  • China in fragmentation trade
  • A dramatic shift in export composition away from
    the standard light manufactured goods (clothing,
    footwear and sport etc) and towards other
    seemingly more sophisticated product lines, in
    particular various products classified under the
    category of machinery and transport equipments
    (henceforth machinery)
  • Pivotal role played by assembly operations within
    global production networks in the expansion of
    machinery and transport equipment exports
    (henceforth referred to as machinery exports
    for brevity).

24
  • - Share of parts and components in imports
  • 1992/3 32.5 2004/5 63.4
  • Share of final goods (1 parts components) in
    exports
  • remained around 75 throughout
  • - Trade balance driven by surplus in final
    (assembled) goods.
  • Chinas export success has so far been
    underpinned by cost competitiveness in final
    assembly arising from labour abundance policy
    reforms that facilitates linking to economy to
    global production chains.
  • No evidence of increased sophistication of the
    export mix (a la Rodrik 2006).

25
  • A notable diversification of China sources of
    component procurement within the region
  • Japan is still the major source, but the share
    has declined (from 27 in 1992/3 to 23 in
    2004/5.
  • Growing importance of ATA countries
  • AFTA share is now much larger than the combined
    share of the North-east Asian NICs
  • Indias trade in parts and components with China
    is minuscule

26
5. Production Fragmentation and regional
vs. Global Trade Integration
  • Table 4 Direction of manufacturing trade total
    manufacturing, 1992/3 and 2004/5 ()
  • Table 5 Direction of manufacturing trade parts
    and components, 19922004 (per cent)
  • Table 6 Intra-regional trade shares total
    manufacturing, parts and components, and final
    trade, 1992 and 2004 (per cent)

27
  • Parts and components account for a much larger
    share of intra regional trade in East Asia
    compared to total (global) trade
  • Share of parts and components is much larger and
    growing rapidly time in imports compared to
    exports points to the increasing importance of
    the region as an assembly centre in the global
    economy

28
  • A vast literature (based on standard trade data
    analysis) which unequivocally infer a persistent
    increase in intra-regional trade in East Asia
    (both including and excluding Japan) (an ongoing
    process of natural regional economic
    integration)
  • But, In a context where intra-regional trade in
    parts and components is growing rapidly, this
    inference may be misleading, because growth
    dynamism of assembly activities depends on demand
    for final goods (which in turn depends on
    extra-regional growth dynamism)
  • Thus, it is important to separate parts and
    components from reported trade in order to
    meaningfully measure intra- versus inter-regional
    (global) trade integration

29
  • Patterns in terms of conventional data
    analysis
  • Total intra-regional trade
  • 1992/3 2004/5
  • East Asia 41.7 56.3
  • Developing East Asia 38.7 50.1
  • Intra-regional trade in East Asia is much Larger
    compared to NAFTA (1992 39, 2003 43).
  • Increase in the share of intra-regional trade is
    faster for developing East Asia and AFTA compared
    to the overall regional figure.  

30
  • Patterns in terms of final trade (reported
    trade parts components)
  • The picture changes significantly when trade
    shares are estimates net of fragmentation trade.
  •  
  • The measured degree of intra-regional trade
    integration is smaller, and remains virtually
    unchanged or declined over time
  • (In other words, the bulk of final exports from
    East Asia find markets in countries outside the
    East Asian region)
  • 1992/3 2004/5
  • East Asia 46.2 44.2
  • Developing East Asia 31.0 36.0
  •    

31
  • For East Asian developing countries Japan is a
    much smaller market for final exports (accounting
    for less than 10 in 2003), compared to the NAFTA
    28 and the EU 21.
  • Unlike in East Asia, the estimated intra-regional
    trade shares for NAFTA and the EU are not
    sensitive to the inclusion or exclusion of
    fragmentation trade
  • 1992/3 2004/5
  • NAFTA 43.5 49.7
  • EU15 62.6 54.4

32
6. Conclusion and Inferences
  • Fragmentation trade is expanding much faster
    compared to conventional product-based trade.
  • The degree and intensity of participation of East
    Asian economies in fragmentation trade is much
    greater compared to countries in other parts of
    the world
  • East Asias dependence on NAFTA and extra-Pacific
    Rim countries for final goods has increased over
    the years
  • So far India has remained a small player in
    fragmentation-based international exchange
    (Why? Does this really matter?)

33
  • Increase in intra-regional trade in East Asia in
    recent years has largely emanated from
    fragmentation-based specialisation
  • (Hypothesis Indias relatively export
    performance can largely be ascribed to its
    failure to get into regional production networks)
  • The regions dependence on extra-regional trade
    in final goods has increased over the years.
  • The ongoing process of international product
    fragmentation strengthens the case for a global,
    rather than a regional, approach to trade and
    investment policymaking in East Asia (and also
    Asia at large).

34
  • Thus, the ongoing process of international
    product fragmentation strengthens the case for a
    global, rather than a regional, approach to trade
    and investment policymaking in East Asia
  • - Maintaining barriers against non-members
    (while allowing free trade among members) can
    hinder natural expansion of fragmentation-based
    specialization across countries
  • - Rules of origin in FTA can be more binding
    for fragmentation trade compared to conventional
    final good trade
  • value added at each stage of production is
    general very small
  • (even though total value added is large given
    the volume factor)
  • So, presumably more sensitive to trade cost and
    delays arising from rules of origin compliance
Write a Comment
User Comments (0)
About PowerShow.com