Gasbased tracking for SuperBelle - PowerPoint PPT Presentation

About This Presentation
Title:

Gasbased tracking for SuperBelle

Description:

2nd Joint Super B factory WS in Hawaii. Wire chamber ... It may cause troubles in a wire stringing process and other occasions. ... – PowerPoint PPT presentation

Number of Views:40
Avg rating:3.0/5.0
Slides: 36
Provided by: sumi3
Category:

less

Transcript and Presenter's Notes

Title: Gasbased tracking for SuperBelle


1
Gas-based tracking for SuperBelle
Shoji Uno (KEK) April, 20-22,
2005 2nd Joint Super B factory WS in
Hawaii
  • Beam background
  • Upgrade plan
  • Summary

2
Wire chamber
  • Wire chamber is a good device for the central
    tracker.
  • Less material ? Good momentum resolution.
  • Cheap ? It is easy to cover a large region.
  • Established technology ? Easy construction.
  • Many layers ? Provide trigger signals and
    particle ID information.
  • Wire chamber can survive at Super-KEKB.
  • Our answer does not change after the last WS in
    2004.
  • The beam background became smaller even for
    higher beam current and higher luminosity.
  • We recognize the luminosity term is small,
    clearly.

3
CDC Total Current
  • Maximum current is still below 1.2mA, even for
    higher stored current and higher luminosity.
  • Vacuum condition is still improving.
  • Thanks KEKB people for hard work.
  • I hope there is still room to improve vacuum
    condition further.

4
Hit rate
Apr.-5th ,2005 IHER 1.24A ILER 1.7A Lpeak
1.5x1034cm-2sec-1 ICDC 1mA
Small cell
Inner
Main
10KHz
5
Luminosity Dependences
Feb, 2004
CDC BG did not change!
Inner most
Middle
Outer
6
Hit rate at layer 35
Dec.,2003
LER
HER
IHER 4.1A Hit rate 13kHz ILER 9.4A Hit
rate 70kHz
Dec., 2003 5kHz Now 4kHz
In total 83kHz
7
Simulation Study for Higher Beam Background
Detail was reported in the last WS by K.Senyo.
MC BGx1
MCBGx20
8
Tracking eff. with B??pp- decays
B-gtpp reconstruction eff. including geometrical
acceptance
Square root of recon. eff. of the left single
track efficiency of mid/high p
Occupancy Overlay(times)
Occupancy Overlay(times)
  • With 600ns dead time and under x20 occupancy, CDC
    keeps about 90 of the single tracking efficiency
    including geometrical acceptance.
  • (thus
    the tracking itself has almost 100 eff.)

9
Slow p efficiency from B?D(Dpslow)p
recon. eff. of the slow pion single track
efficiency of slow p
B??Dp reconstruction eff. including geometrical
acceptance
  • About 80 of efficiency is kept in the slow p
    efficiency under x20 occupancy.
  • Reconstruction using SVD information is
    necessary to recover the loss of efficiency.

10
Occupancy
Random trigger
x20 Bkgd in Belle CDC x3 Bkgd in Babar DCH
11
at HL6 in KEK
12
Idea for upgrade
  • In order to reduce occupancy,
  • Smaller cell size
  • A new small cell drift chamber was constructed
    and installed.
  • It has been working, well.
  • Faster drift velocity
  • One candidate 100 CH4
  • Results show worse spatial resolution due to a
    large Lorentz angle.
  • A beam test was carried out under 1.5T magnetic
    field.
  • So far, no other good candidate.

13
XT Curve Max. Drift Time
Small cell(5.4mm)
  • Normal cell(17.3mm)

14
Baseline design
CDC
SVD
15
Main parameters
16
Wire configuration
  • 9 super-layers 5 axial 4 stereo(2U2V)
  • A 1608, U 1606, A 1926, V 2246,
  • A 2566, U 2886, A 3206, V 3526, A 3888
  • Number of layers 58
  • Number of total sense wires 15104
  • Number of total wires 60000

17
Deformation of endplate
  • Number of wires increase by factor 2.
  • Larger deformation of endplate is expected.
  • It may cause troubles in a wire stringing
    process and other occasions.
  • Number of holes increases, but a chamber radius
    also enlarges. Cell size is changing as a
    function of radius to reduce number of wires.
  • The fraction of holes respect to total area is
    not so different, as comparing with the present
    CDC.
  • 11.7 for present CDC
  • 12.6 for Super-Belle CDC
  • In order to reduce deformation of endplates,
  • The endplate with a different shape is
    considered.
  • Wire tension of field wires will be reduced.
  • Anyway, we can arrange the wire configuration and
    can make a thin aluminum endplate.

18
Better background
  • Higher luminosity is not always higher beam
    background.
  • KEKB Luminosity gt PEPII Luminosity
  • Belle background lt Babar background
  • Now, we(KEKB-BellePEPII-Babar) are discussing a
    future machine. New machine should be designed to
    reduce the beam background based on our
    knowledge.
  • We should make effort to get better background
    condition in the future machine using present
    both machines and both detectors.

19
Smaller background in Babar CDC
  • Only 0.3 occupancy for LER particle background.

Occupancy normalized by readout time window()
Brian Petersens talk in HL6
20
Best condition
  • Small SR background (PEPII HER)
  • Small HER particle background (KEKB HER)
  • Small LER particle background (PEPII LER)
  • Small Luminosity term (KEKB)
  • Movable masks (KEKB)
  • Small pixel or striplet (New)
  • Larger SVD (Babar SVT)
  • Larger gas-based CDC (Belle CDC)
  • FADC readout (Babar CDC)
  • Good reconstruction software (Babar?)
  • Lower B field?

21
Summary
  • Our conclusion does not change from the previous
    WS in the last year.
  • Background became better even for higher stored
    current and higher luminosity.
  • We recognize the luminosity term is small,
    clearly.
  • New CDC
  • Smaller cell size for inner most layers.
  • Larger outer radius
  • Better performance is expected.
  • Or lower magnetic field.

22
Radiation Damage Test
Gain degradation
Total accumulated charge on sense wire(C/cm)
a 93 Plastic tube d 94 SUS
tube b 93 Plastic tube O2 filter e 94
SUS tube O2 filter c 94 Plastic tube
f 94 Plastic tube
23
Momentum Resolution
  • Thanks for filling He based gas and using
    Aluminum field wires.
  • The resolution was calculated using cosmic ray
    events during a normal physics run.
  • BaBar data was obtained from a talk in Vancouver
    WS.

24
Momentum Resolution
  • We could obtain a small constant term using
    He-based gas and aluminum field wires.
  • Slop parameter is not so good as compared with
    expected value.
  • We had to change the electronics parameters to
    reduce the cross talk.
  • HV is slightly lower than the original value.
  • Alignment is not perfect.
  • More tuning to reject bad points.
  • Some effects from the beam background.

Transverse Momentum(GeV/c)
25
dE/dx Resolution
  • Good resolution was obtained.
  • It is useful to identify hadrons and electrons.

26
dE/dx Measurement
  • MQT chip (Charge to Time conversion) and
    multi-hit TDC.
  • 80 truncated mean.
  • Relativistic rise.
  • 1.4 for electron.
  • Good PID performance for lower momentum region.
  • dE/dx information helps to separate high momentum
    K/p.

Normalized dE/dx
log10P(GeV/c)
27
Comparison with Babar
  • Momemtum resolution(SVDCDC)
  • sPt/Pt 0.19Pt ? 0.30/b Belle
  • sPt/Pt 0.13Pt 0.45 BaBar
  • Mass(dE) resolution
  • Mass resolution for inclusive J/y ? mm-
  • 9.6 MeV(Belle) vs 12.3 MeV(BaBar)
  • dE resolution for B0? D-p, D- ?Kp-p-
  • 13.8MeV(Belle) vs 19.0MeV(BaBar)
  • We could obtain better resolution than BaBar.
  • BaBar has a CFRP support cylinder with 2mm
    thickness between SVD and CDC.
  • Tracking efficiency for low momemtum particles is
    worse than BaBar.
  • DD- yield(slow p eff.) 0.5(?) x BaBar
  • 3 layers SVD (Belle) vs 5 layers SVD(BaBar)
  • Energy loss measurement
  • 5.6(Belle) vs 7(Babar) for Bhabar events

28
Pulse height variation
Hokuue
29
Hit rate
Apr.-5th , 2005 IHER 1.24A ILER 1.7A Lpeak
1.5x1034 ICDC 1mA
Small cell
Inner
Main
10kHz
30
Small Cell Drift Chamber
31
Photo of small cell chamber
Installation in 2003 summer
Just after wire stringing
32
Curved Endplate
  • Deformation of endplate due to wire tension was
    calculated at design stage of present Belle CDC.

Deformation(mm) 35.2 2.03
1.31
Present New
33
Expected performance
  • Occupancy
  • Hit rate 140kHz ? 7Hz X 20
  • Maximum drift time 80-300nsec
  • Occupancy 1-4 ? 140kHz X 80-300nsec
    0.01-0.04
  • Momemtum resolution(SVDCDC)
  • sPt/Pt 0.19Pt ? 0.30/b Conservative
  • sPt/Pt 0.11Pt ? 0.30/b Possible ?
    0.19(863/1118)2
  • Energy loss measurement
  • 6.9 Conservative
  • 6.4 Possible ? 6.9(752/869)1/2

34
Movable Masks
  • 16 masks in HER and 16 masks in LER.
  • 8 horizontal 8 vertical for each rings.
  • Location
  • 4(H)4(V) at D6 and 4(H)4(V) at D3 for LER
  • 4(H)4(V) at D9 and 4(H)4(V) at D12 for HER

35
Effectiveness
  • Usually, the horizontal masks are not effective.
    Because the horizontal tail is not so large.
  • A few vertical masks are quite effective to
    reduce the beam background in the both cases for
    storage and injection and also for LER and HER.
  • By factor two or more.
  • KEKB had movable masks near IR, which were not so
    effective to reduce the beam background.
  • Those masks in both of LER and HER were removed.
Write a Comment
User Comments (0)
About PowerShow.com