Bridges - PowerPoint PPT Presentation

1 / 14
About This Presentation
Title:

Bridges

Description:

Bridges By: Alaa, Dustin, Kamran, and Maggie Importance Necessary to daily life Makes for easy transportation over water or valleys Makes land travel faster and more ... – PowerPoint PPT presentation

Number of Views:433
Avg rating:3.0/5.0
Slides: 15
Provided by: nohsteach2
Category:
Tags: bridges | geometry

less

Transcript and Presenter's Notes

Title: Bridges


1
Bridges
  • By Alaa, Dustin, Kamran, and Maggie

2
Importance
  • Necessary to daily life
  • Makes for easy transportation over water or
    valleys
  • Makes land travel faster and more efficient

3
History
  • Bridges have been around since before the first
    century A.D.
  • A main use was to move water to where it was
    needed though aqueducts

4
History
  • In the late 1700s cast iron was innovated into
    bridges.
  • With the innovation of steel mills came stronger
    and longer bridges, such as the suspension bridge

5
Types of Bridges
  • Arch Bridges
  • Beam Bridges
  • Suspension Bridges
  • Truss Bridges

6
Arch Bridges
  • One of the oldest types of bridges
  • The weight of the bridge is carried out along the
    curve of the arch
  • This support takes the load and keeps the ends
    from flatting out
  • Mostly constructed from stone or brick

7
Beam Bridges
  • Consists of a horizontal beam
  • Made from almost anything wood, stone, steel,
    ect.
  • Supported at each end by piers
  • Weight of the beam pushes down on the piers,
    without them the bridge would sink into the ground

8
Suspension Bridges
  • Suspended roadway by cables, sometimes spanning
    the length of the bridge
  • Cables rest on top of towers, this enables the
    main cable to be draped over long distances
  • Must be constantly maintenance to perform
    properly

9
Truss Bridges
  • A beam bridge with two sides that extend to the
    top and or bottom are the trusses
  • Hold the weight of the bridge in the truss
  • Most common design of truss or the interior of a
    truss is triangles

10
Active Forces
  • Tension- The state of being stretched
  • Torsion- To twist in opposing directions
  • Compression- To push together
  • Shear- Two objects to slide past one another in
    opposing directions

11
Triangles
  • One of the most stabilizing force in architecture
  • If weight is applied onto a triangle the pressure
    due to compression is distributed evenly
  • Only if a side of the triangle is compromised
    will the triangle fail and break
  • They are used in bridges, buildings and towers

12
Rigidity
  • When a triangle is added to a structure it
    becomes more rigid
  • When a structure is more rigid it can be made
    longer and bigger

13
Engineering
  • To engineer a bridge theorems and postulates are
    used
  • If a triangle did not add up to 180 in a truss
    then the truss would have no support

14
No Geometry?
  • Without geometry life would be very basic
  • There would be no large bridges, planes, trains,
    cars or other forms of transportation
  • Buildings would not be more than a story tall
Write a Comment
User Comments (0)
About PowerShow.com