Service Opportunities From UPT and ENUM to UCI - PowerPoint PPT Presentation

1 / 25
About This Presentation
Title:

Service Opportunities From UPT and ENUM to UCI

Description:

What is a 'Phone Number' ? 'Phone numbers' are used for identification, addressing and naming ... The lookup finally retrieves pointers (NAPTR) to IP-based ... – PowerPoint PPT presentation

Number of Views:92
Avg rating:3.0/5.0
Slides: 26
Provided by: RichardS219
Category:

less

Transcript and Presenter's Notes

Title: Service Opportunities From UPT and ENUM to UCI


1
Service Opportunities From UPT and ENUM to UCI ?
  • ECMA TG17 June 2001
  • Richard STASTNY
  • ÖFEG, Postfach 147, 1103-Wien
  • Tel 43 664 420 4100Fax 43 1 79780 13E-Mail
    richard.stastny_at_oefeg.atrichard_at_stastny.com

ÖFEG
2
Contents
  • How can we migrate to UCI ?
  • Three Ingredients needed
  • IP Telephony
  • UPT according to ITU-T F.852
  • ENUM
  • Comparison of UPT and ENUM
  • Conclusion on how to migrate to UCI

3
Definitions
  • Three basic entities required to establish a
    telecommunication
  • Identification of the user to the service
    provider (e.g. UserID, IMSI, ...) - provides
    mobility
  • (Network) Address (e.g. IP-address) mapped to the
    current user terminal
  • used for routing - not portable
  • Name (currently related to service) -
    alphanumeric string
  • mapped to the current address of terminal where
    the user has identified himself
  • for the convenience of the calling party
  • portability is depending on service
  • A Name resolution is required to find the address
  • So what is a Number ?
  • numeric string
  • It may be an identification, name or address

4
What is a Phone Number ?
  • Phone numbers
  • are used for identification, addressing and
    naming
  • there are private, local and national numbering
    and dialing plans
  • E.164 number - a globally unique numbering plan
    (there is no global dialing plan)
  • E.164 numbers started as addresses (in analog
    systems)
  • Number portability, service numbers and other
    IN-Services use E.164names
  • E.164addresses still used for routing (routing
    numbers)
  • E.164names used by calling party
  • E.164 numbers identify terminals, user, services,
    routing, etc.
  • This mixture is one reason of the current problem
    with numbers

5
IP Telephony
  • IP Telephony (VoIP, Internet Telephony)
  • Voice Communication via IP-based networks
  • Protocols H.323, SIP,
  • Terminals PC, Terminal adaptors, IP-Phones, ...
  • Basic Scenarios
  • PC-to-PC
  • No interworking with the SCN (phone) network
  • Naming used Internet names user_at_domain,
    proprietary,
  • PC-to-Phone, Phone-to-Phone
  • Interworking with SCN via gateways
  • Naming used E.164
  • Phone-to-PC
  • PC needs a phone number ? extension of E.164 to
    IP Telephony

6
Phone-to-PC IP Telephony
  • ETSI TIPHON and ITU-T/SG2 position
  • The telephony service (E.105) is technology
    independent
  • IP telephony is an extension of the telephony
    service
  • E.164 compatibility necessary for an any-to-any
    service
  • What kind of E.164 numbers to use ?
  • National geographic (and private)
  • National non-geographic
  • Global
  • Yes, all of them, but
  • Geographic Numbers require number portability
    from the beginning (signalling and regulatory
    problems)
  • IP Phones are mobile and personal (they use
    identifiers)
  • Provide service provider portability from the
    beginning
  • How to optimize routing, but be technology
    independent?
  • Solution use national and global personal
    numbers (UPT)

7
UPT according to ITU-T F.852
  • Merging circuit switched and IP-based voice
    services
  • Global portable E.164 and E.168 UPT-Number e.g.
    878 878 000001234
  • User Registration and profile modification from
    any terminal. The terminal may be either IP-based
    or SCN-based (access with globally unique UPTAC
    878 800)
  • Receiving of incoming calls (InCalls) on any
    registered terminal from any terminal on a
    network capable of routing the call to the
    associated UPT-number.
  • Placing of out-going calls (OutCalls) from any
    registered IP-based terminal charged to the
    UPT-user.
  • Placing of single outgoing calls with follow-on
    from any registered SCN-based terminal charged to
    the UPT-user, if an UPTAC or a free-phone UPTAN
    is provided in the originating SCN-network.
  • Personal User Agents provide voice box services
    (e.g. on non reachable) and additional
    supplementary services.

8
Tiphon Resolution Capability (TRC)
  • Purpose of TRC
  • global service to resolve E.164 numbers to
    ContacIDs
  • the ContacID is identifying the home domain of
    the user
  • TRC may be used for all kinds of numbers
  • national geographic numbers (e.g. LNP)
  • national and international service numbers (e.g.
    freephone, UPT, etc.)
  • The TRC consists of two parts
  • administrative part
  • administration of entries by authorities
    (policies) and providers, distribution of data to
    the real time part
  • real-time part
  • query in real time of ContactIDs related to
    numbers during call setup

9
Registration on a circuit switched terminal
1 613 232 6880
1 (InCall)
1 613 232 6880
011 878 800
878 878 00000 1234
4321
2 (OutCall)
011 43 1 797 80 32
10
OutCall of an UPT User
1 613 232 6880
43 1 797 80 32
878 878 00000 1234
11
InCall to an UPT User
878 878 00000 1234
00 878 878 00000 1234
1 613 232 6880
12
Road to global UPT Services
  • Prerequisites for a global UPT service
  • based on standards (ITU-T, ETSI TIPHON, etc.)
  • interconnected IP Telephony domains to provide
    minimum level of QoS
  • IP telephony gateways to circuit switched
    networks and proper routing
  • global resolution capability (TRC)
  • global administration and local issuing of
    numbers
  • trust centers and certification authorities
  • clearing houses for billing and accounting
  • Core TEN TELECOM TIPHON (TTT) Services
  • Common Service Definition based on TIPHON
    standards
  • Trials and Pilots
  • Opening of a pre-commercial service within

13
ENUM Overview
  • ENUM is part of series of technical initiatives
    underway in both the IETF and ITU to develop
    Internet Telephony Standards
  • Call Setup H.323 SIP
  • Quality of Service DIFFSERV INTSERV MPLS
  • PSTN IP Interworking H.248/MEGACO
  • FAX T.37 T.38 RFC 2503
  • Mobile 3GPP related
  • AND naming and addressing
  • ENUM is about new service creation
  • ENUM is about convergence

14
ENUM / DNS Directory Service
  • Put telephone numbers into the global Domain Name
    System DNS
  • ENUM WG formed and operates within in the
    Internet Engineering Task Force
  • Core protocol work completed - RFC2916
  • RFC2916 defines the use of DNS resource records
    to find optional
  • E-mail addresses
  • Voice over IP SIP / H.323 servers
  • Voice Mail servers
  • Fax Machines
  • New and yet undefined services !

15
How Does ENUM Work?
  • Take a fully qualified E.164 telephone number and
    create a DNS entry in a single highly defined and
    structured domain.
  • The search for resources on the internet
    associated with 1 202-533-2811 becomes a DNS
    look up to
  • 1.1.8.2.3.3.5.2.0.2.1.e164.arpa
  • The lookup finally retrieves pointers (NAPTR) to
    IP-based applications, e.g.
  • IN NAPTR 10 10 "U" "sipE2U "!.!sipspam_at_paf.s
    e!"
  • IN NAPTR 20 10 "U" "ldapE2U "!.!mailtospam_at_p
    af.se!"
  • The client chooses the further action.

16
RFC 2916
  • ENUM is not about putting telephone numbers into
    any domain. It is specifically about putting
    E.164 numbers into e164.arpa ( a subtle
    distinction )
  • From RFC2916
  • The domain "e164.arpa" is being populated in
    order to provide the infrastructure in DNS for
    storage of E.164 numbers.
  • This memo requests that the IANA delegate the
    E164.ARPA domain following instructions to be
    provided by the IAB. Names within this zone are
    to be delegated to parties according to the ITU
    recommendation E.164. The names allocated should
    be hierarchic in accordance with ITU
    Recommendation E.164, and the codes should
    assigned in accordance with that Recommendation.
  • Private dialing plans can be accommodated in any
    domain.

17
Why e164.arpa ?
  • The e164.arpa domain was selected by the Internet
    Architecture Board specifically for this purpose
    with the concurrence of the ITU
  • .ARPA is designated by the IAB for Internet
    Infrastructure issues
  • in-addr.arpa (reverse IP address look up)
  • .ARPA is a well managed, stable and secure
    operational environment under IAB supervision
  • Single domain structure under e164.arpa becomes
    the authoritative root for E.164 telephone
    numbers

18
Typical call flows PSTN - IP
19
Typical call flows IP - PSTN
20
ENUM - DNS Structure Hierarchy
e164.arpa RIPE NCC
Tier 0
Tier 1 Registry
0.8.7.9.7.1.3.4.e164.arpa
Tier 2 Service Registrar
NAPTR to sipstastny_at_prov.net
Tier 3 Application Service Provider
prov.net
21
Applications
22
What have ENUM and UPT in common?
  • Both allow calls to terminate on SCN-based and
    IP-based terminals.
  • Both use IP-based applications.
  • Both allow the customer to select an E.164 number
    to be his main communication identifier.
  • In case of ENUM this must be an already existing
    number, in case of UPT this is a new number.
  • Both allow incoming calls to be forwarded to
    other applications and/or identities, although
    with different control mechanisms.

23
What are the differences?
  • UPT is controlled by the called party, with ENUM
    the calling user may actively select between
    variants.
  • With UPT the calling user need not to be aware to
    call a UPT number, with ENUM the calling user
    actively need to choose to use ENUM. He also may
    need a special client or a network, which is ENUM
    aware.
  • UPT currently is mainly envisaged for telephony
    services, although additional services may be
    added later. With ENUM, any IP-based application
    may be used, if the calling party is also
    IP-based or the network is ENUM-enabled.
  • One main feature of UPT is the possibility to
    register on any terminal to receive incoming
    calls, another feature is the possibility to make
    outcalls from any terminal charged to the account
    of the user. This is not possible with ENUM.
  • Even if the ENUM service provider (ESP, T2E) is
    providing a customer self-care interface for
    modifying the DNS entries, the possibilities are
    not very flexible and quite static. UPT is
    offering a more flexible concept with the
    Personal User Agent (PUA), e.g. filtering and
    screening of incoming calls.

24
Conclusion
  • Start with UPT and ENUM
  • There is no need to generally favor one service
    above the other, this is up to the customer and
    his needs.
  • Coexistence possible Enter UPT in ENUM, use ENUM
    as resolution capability and pointer to other
    non-voice services.
  • and bring together the benefits of both
    solutions, thus enabling a smooth migration from
    UPT and ENUM to a UCI PUA based service
  • The UPT number and the UCI numeric string can be
    compatible, allowing the PUA to be reached and
    used from the fixed telephony network.
  • The user profile, unified cross messaging and the
    customer self care services used for the UPT
    service may act as a starting point for the
    services envisaged for the PUA.
  • Identification, authentication and authorisation
    used for the UPT Services and the certification
    authorities (trust centers) within the VISIONng
    infrastructure (PKI) may serve as a base for the
    requested trusted communications.

25
The End
  • Thank You for Your Attention
  • Questions ?
Write a Comment
User Comments (0)
About PowerShow.com