Xcel Energy DSM Potential Study - PowerPoint PPT Presentation

1 / 29
About This Presentation
Title:

Xcel Energy DSM Potential Study

Description:

Xcel Energy DSM Potential Study. Randy Gunn. Summit Blue Consulting. 12/12/02. Agenda ... Summit Blue Consulting. Consulting firm formed in 2000. Principals ... – PowerPoint PPT presentation

Number of Views:99
Avg rating:3.0/5.0
Slides: 30
Provided by: randy59
Category:
Tags: dsm | blue | energy | potential | randy | study | xcel

less

Transcript and Presenter's Notes

Title: Xcel Energy DSM Potential Study


1
Xcel Energy DSM Potential Study
  • Randy Gunn
  • Summit Blue Consulting
  • 12/12/02

2
Agenda
  • Xcel Energy and Summit Blue Consulting
    background.
  • Xcel Energy DSM background.
  • Current DSM potential study methods.
  • Current DSM potential study results.
  • Conclusions.

3
Xcel Energy Background
  • Company formed in 2001 by merger of Northern
    States Power Company and New Centuries Energy.
  • Company serves 12 states, is headquartered in
    Minneapolis, and serves most of the population of
    Colorado.
  • Has 3.2 million electric customers and 1.7
    million natural gas customers.

4
Xcel Energy Background (2)
  • Total revenues are about 15 billion annually,
    the 4th largest utility in U.S.
  • Regulated power plants generate about 15 GW of
    power.
  • Company is a leading developer of wind power,
    with sizable wind farms in MN and CO totaling
    more than 400 MW of capacity.

5
Summit Blue Consulting
  • Consulting firm formed in 2000.
  • Principals are Dan Violette and myself.
  • Energy services is a principal practice area.
  • I and other SBC staff have managed many previous
    DSM potential studies.
  • Demand response is another SBC key practice area.
  • Offices in CA, CO, IA, IL, MN and NY.

6
Other SBC Practice Areas
  • Retail strategy and analysis.
  • Product, service, and program development.
  • Product/program evaluation/market research.
  • Energy systems technology assessments and
    potential studies.
  • Restructuring analysis/policy development.
  • Renewable strategy/program development.

7
Xcel Energy DSM History
  • Company has heavily promoted energy efficiency
    and load management for more than 30 years.
  • Started with interruptible rate programs for
    large industrial customers in the late 1960s.
  • Expanded into residential weatherization loan and
    audit programs in the 1970s.
  • Continued expanding into residential, commercial,
    and industrial energy efficiency rebate and audit
    programs in 1980s.

8
Xcel Energy DSM History (2)
  • The Company currently manages about 30 energy
    services programs in MN and 10 programs in CO.
  • 2001 MN DSM program results include 254 GWh of
    electricity conserved, 139 MW of demand reduced,
    and 521 Million CF of gas conserved.
  • 2001 MN electric DSM expenses were 37 million
    and avoided costs were 280 million.

9
Xcel Energy DSM History (3)
  • Largest program demand impacts in 2001 came from
    CI interruptible rates, direct load control, CI
    lighting, CI new construction, CI custom
    efficiency, and residential Energy Star.

10
Xcel Energy DSM History (4)
  • 2001 MN electric program costs were about 1.0
    cents/kWh (lifetime).
  • 2001 MN natural gas program costs were about 3
    million and avoided costs were about 9 million.
  • Past 10-year MN electric impacts are 2,643 GWh
    and 1,086 MW.
  • Past 10-year MN electric DSM costs total 370
    million, and avoided costs total about 1.5
    billion.

11
Xcel Energy DSM History (5)
  • MN law requires nuclear electric utilities to
    spend 2 of their revenues on DSM and gas
    utilities to so spend 0.5 of their revenues.
  • Xcel Energy agreed to spend 15 million annually
    on DSM in CO for 5 years as part of a merger
    agreement settlement with CO parties.

12
Current DSM Potential Study
  • Originated from 2001 recommendation of Company MN
    energy services advisory group. The market data
    used for DSM planning was about 7-8 years old
    then.
  • Primary purpose of the study is to guide
    long-term DSM planning for MN, particularly in an
    IRP context.

13
Study Methodology
  • The bases of the study are primary data
    collection and a technology forecasting model.
  • Primary data collection includes
  • On-site surveys of a representative sample of 525
    CI customers. Surveys collected key data about
    energy using equipment, building shell
    characteristics, customer energy decision-making
    criteria, awareness of ECMs and XE DSM programs,
    and market barriers.

14
Study Methodology (2)
  • Similar on-site surveys also being conducted for
    500 residential single-family customers and 50
    common area apartment customers.
  • Re-commissioning DSM potential studies being
    conducted for 11 larger previous CI on-site
    survey customers .
  • Telephone surveys of equipment vendors,
    technology experts, and XE customer account reps
    to forecast growth in awareness and adoption
    rates.

15
Selected CI On-Site Survey Results--Lighting
  • Current saturations of T8 lamps and electronic
    ballasts are about 70 for 4 systems, but only
    14 for 8 systems. In 1993, when the last study
    was done, the 4 T8 system saturation was only
    13.
  • Current saturation of CFLs are about 38 overall
    compared to incandescent lamps.
  • Occupancy sensors and other lighting controls
    have 1 saturations or less.

16
C I Lighting Results (2)
  • Customer awareness of lighting ECMs varied widely
    from 15-20 for newer measures such as T5 and
    pulse start metal halide lamps to 55-65 for
    older measures such as T8 systems and CFLs.
  • Customer awareness of common ECMs like T8 systems
    and CFLs was forecast to be about 100 by now in
    the mid-1990s study. The difference may be due
    to considerable turnover in customers facility
    staff in the past 10 years.

17
HVAC On-Site Survey Results
  • Efficient centrifugal chiller saturations are
    currently about 15.
  • Efficient rooftop AC unit saturations are about
    1.
  • Customer awareness of common ECMs such as
    efficient rooftop AC units is about 60.
  • Customer awareness of niche systems like ground
    source heat pumps and cool storage systems are
    about 20.

18
Industrial ECM On-Site Survey Results
  • Current saturations of efficient motors vary
    widely, from 1 for small motors to 22 for very
    large motors.
  • Current saturations of ASDs also vary widely,
    from 2-3 for small motors, up to 10-14 for
    very large motors.
  • Customer awareness of efficient motors is
    relatively high at 67.
  • Customer awareness of ASDs is about 55.

19
RERs ASSET Technology Forecasting Model Overview
  • Weve used this model to prepare DSM forecasts
    for XE IRPs four times since the mid-1990s.
  • Since the previous DSM potential study, the model
    was re-calibrated based on recent actual program
    results.
  • For this study, the model was much more
    extensively re-calibrated based on 2002 on-site
    equipment data and expert opinion from market
    surveys.

20
RERs Asset Framework
Customer Data
Technology Data
SegmentData
Technology Definitions
Technology Adoption Data
UsageProfiles
Segment/ Technology Information
AdoptionModels
Adoption Results
Energy Impacts
Utility Impacts
B/C Results
21
Market Potential Concepts
  • Technical Potential
  • Instantaneous
  • Phased
  • Economic Potential
  • Customer perspective
  • Resource cost Perspective
  • Achievable Potential
  • Current incentive
  • 0-200 of current incentives

22
Technology Adoption Modeling Concepts

23
Technologies
  • Four-Foot Fluorescent
  • Eight-Foot Fluorescent
  • High-Output Fluorescent
  • Compact Fluorescent
  • High-Intensity Discharge
  • Exit Signs
  • Reflectors with Delamping
  • Occupancy Sensors
  • Daylighting Controls
  • High-Efficiency Chillers
  • High-Efficiency Packaged DX
  • Evaporative Condenser
  • Thermal Energy Storage
  • Energy Management System
  • Economizers
  • Glazing Efficiency
  • High-Energy Efficient Motors
  • Adjustable Speed Drives
  • Efficient Compressors
  • Custom Compressor Measures
  • Leak Repair
  • Refrigeration Compressor Measures
  • Refrigeration Condenser Measures
  • Refrigeration Case Measures

24
CI Lighting Results
  • Total 15-year DSM potential for the 2002 Resource
    Plan is 200 MW and 970 GWh.
  • This is 8-9 higher than the 185 MW and 879 GWh
    from the 2000 Resource Plan.
  • Estimated program costs are 126 million.
  • The largest ECMs are 4 T8 lamps and electronic
    ballasts, followed by lighting reflectors.

25
CI Cooling Results
  • Total 15-year DSM potential for the 2002 Resource
    Plan is 134 MW and 230 GWh.
  • This is similar to the 135 MW and 243 GWh from
    the 2000 Resource Plan.
  • Estimated 15-year program costs are 72 million.
  • The largest ECMs are efficient centrifugal
    chillers followed by energy management systems.

26
CI Refrigeration Results
  • Total 15-year DSM potential is about 200 GWh and
    23 MW. Total program costs are estimated to be
    20 million.
  • This is about 25 less than the 273 GWh and 29 MW
    from the 2000 Resource Plan. 2001 XE program
    achievements were about half what they were is
    1999.
  • The largest ECM is efficient compressors.
  • Customer awareness of main refrigeration ECMs is
    only 20-30.

27
Process-Oriented ECM Results
  • Covers efficient air compressors, motors, and
    custom measures.
  • Total 15-year DSM potential for the Resource Plan
    is 127 MW and 622 GWh. Total program costs are
    estimated to be 75 million.
  • This is similar to the 126 MW and 674 GWh from
    the 2000 Resource Plan.
  • Custom measures estimated to have most potential
    based on recent XE program experience.

28
Conclusions
  • Overall 2002 15-year CI DSM potential estimates
    total 578 MW and 2,439 GWh.
  • The electric energy conservation potential
    estimate is very similar to the estimates used
    for the 2000 IRP.
  • Overall 2002 electric demand savings estimates
    are about 20 less than 2000 estimates, primarily
    due to smaller projected load management impacts.

29
Conclusions (2)
  • Overall 15-year CI program costs estimates total
    390 million.
  • This is about 20 higher than the 2000 estimates
    due to a larger share of projected program
    impacts coming from new construction, and higher
    per unit new construction program costs than for
    retrofit programs.
Write a Comment
User Comments (0)
About PowerShow.com