Selling an Idea or a Product

1
Plastisols Daymax Advantages Against
Top Driven Dissolvers
For production of the highest quality plastisols
and organisols. This high shear disperser
thoroughly disperses the PVC resin and
extender pigments in the plasticizer in a minimum
length of time. No milling on three roll mills is
needed following the Daymax dispersion
cycle. You will get approximately a 2-3 gain in
actual yield when the Daymax is used in
dispersion. This increase is due to the fact
that there is not the usual loss of product
caused by transferring it to and from several
vessels and machines. All viscosities except the
very highest are handled on the Daymax. Heat
build-up long a problem in plastisol
manufacturing, is minimized with the Daymax
because the dispersion cycle is generally
very short in comparison with that of other
methods. Heat does not have a chance to build.
Also, the unit is jacketed, for proper
temperature control.
LOWER INVESTMENT FASTER PRODUCTION LESS
MANPOWER ALL-IN-ONE TANK JOB LESS HEAT BUILD
UP
Single Daymax costs less than slow-speed mixers
with three-roll-mills. Batch compounded under
high shear drastically reduces batch times. No
milling personnel needed. Larger Batchs means
less manpower/Ton Higher Yields,2-3 higher.
Easier Clean Dispersion is accomplished so
rapidly that heat does not build up.