You treat all of the tools and equipment with respect. The workshop is safe and your project is succ

1
You spot the emergency stop switch on your way
into the workshop. Its good to know where it is
incase there is an accident. Move FORWARD 4.
You treat all of the tools and equipment with
respect. The workshop is safe and your project
is successful. Move FORWARD 5.
You notice damage to the wire on the hegna saw.
You report it to the technician who fixes it
without delay. Move FORWARD 8.
You take off your watch and jewellery so that it
does not get scratched or caught. Move FORWARD 5.
You tie back your long hair so that it doesnt
get caught in the machines. Move FORWARD 6.
You keep your hands away from the abrasive
surface on the disk sander. Move FORWARD 5.
You leave your bag under the desk in the
classroom so no-one trips over it. Move FORWARD 7.
You concentrate carefully without talking whilst
you sand your object, keeping your fingers away
from the disk.. Move FORWARD 6.
You listen carefully when the teacher tells you
how to use the sand blaster. Move FORWARD 4.
You forget how to load vinyl into the cutter.
You remember to ask questions before you try to
cut. MOVE FORWARD 8.
You switch the extractor fan on whilst using the
sand blaster. It takes away the dust. MOVE
FORWARD 4.
2
BONUS!
BONUS!
BONUS!
BONUS!
BONUS!
BONUS!
BONUS!
BONUS!
BONUS!
BONUS!
BONUS!
BONUS!
3
The disk on the sander is moving very quickly.
You forget to put an apron on when you go into
the workshop. You damage your uniform and it
costs 40 to replace. Move BACK 4.
You forget to switch the extractor on in the sand
blaster, clogging it up and breaking it. You
spoil the project for everyone. Move BACK 3.
You press your work on for too long and burn it
badly. Move BACK 3.
You scuff your hand because you do not hold your
work at
Your tie gets caught on the polisher mop,
twisting around at high speed. You are almost
strangled. Move BACK 6.
You sand the end of your finger off because you
lose concentration when working on the
sander.Move BACK 5.
the edge furthest from the polisher mop. Move
BACK 4.
The pillar drill flicks a shard of sharp metal
into your eye
You dont listen when you are told what to do.
You are too shy to ask questions and get nothing
done this lesson. Move BACK 2.
You dump your bag on the floor and your friend
trips over it, smashing their work. Move BACK 2.
because you forget to wear goggles.Move BACK 6.
You forget to put the guard down on the pillar
drill.
You dont listen when the teacher tells you how
to work the drill. You split your work in half.
MOVE BACK 3
You run across the workshop and slip on some
water. You fall and hit your head. Move BACK 3.
A piece of plastic catches your face.Move BACK 5.
4
RISK!
RISK!
RISK!
RISK!
RISK!
RISK!
RISK!
RISK!
RISK!
RISK!
RISK!
RISK!
5
Chisel
Marking Knife
SteelRule
Tenon Saw
Coping Saw
Chisel
Marking Knife
SteelRule
Tenon Saw
Coping Saw
Chisel
Marking Knife
SteelRule
Tenon Saw
Coping Saw
Chisel
Marking Knife
SteelRule
Tenon Saw
Coping Saw
Chisel
Marking Knife
SteelRule
Tenon Saw
Coping Saw