Initial stage on the Touch Screen Panel is black ie Screen save Mode : - PowerPoint PPT Presentation

Loading...

PPT – Initial stage on the Touch Screen Panel is black ie Screen save Mode : PowerPoint presentation | free to view - id: 1a3271-NzIwN



Loading


The Adobe Flash plugin is needed to view this content

Get the plugin now

View by Category
About This Presentation
Title:

Initial stage on the Touch Screen Panel is black ie Screen save Mode :

Description:

Presenter touch the Power 'ON' Amplifier System Icon ... House light at default Medium level when using Presenter using Computer/Video Mode. ... – PowerPoint PPT presentation

Number of Views:35
Avg rating:3.0/5.0
Slides: 41
Provided by: thi52
Category:

less

Write a Comment
User Comments (0)
Transcript and Presenter's Notes

Title: Initial stage on the Touch Screen Panel is black ie Screen save Mode :


1
Updated on 20-11-2006
  • Initial stage on the Touch Screen Panel is black
    (ie Screen save Mode)
  • To start Presenter touch any area on the screen.
  • By default the Screen is raised.

2
Updated on 20-11-2006
Welcome to Nanyany Technological
University Lecture Room 2A
To turn ON the Amplifier System touch Icon
below
POWER ON AMPLIFIER SYSTEM
  • To turn ON the Amplifier system
  • Presenter touch the Power ON Amplifier System
    Icon
  • Once selected the Amplifier at control room will
    turn ON in sequence.

3
Updated on 20-11-2006
Presenter Using Computer/Video
Presenter Using OHP
Select one mode for Presentation
  • Presenter can choose one Presentation mode.
  • Presenter using computer/video or Presenter using
    OHP.

4
Updated on 20-11-2006
Presenter Using Computer/Video
Presenter Using OHP
Select one mode for Presentation
  • If Presenter choose Presenter Using
    Computer/Video mode.
  • Presenter using computer/video Icon will
    highlighted and change to Presenter Using
    computer/Video page.

5
Updated on 20-11-2006
Presenter using OHP
If Main Projector cannot turn ON Activate
Emergency Projector
Presenter using Computer/Video
Main Projector Activated
House light
Master Volume
Notebook 2
Notebook 1
Computer at Console
HIGH
80
Up
Down
Visualiser
MED
VCR
LOW
DVD
OFF
FLASHING
Please Wait for 20 secs Power ON in
Progress For Projector
Turn ON Projector
Remember to select this Icon To Shut down all
Audio video System after use
  • Presenter using Computer/Video mode
  • Presenter using Computer/Video Menu will
    highlight. The Motorize screen will lowered.
  • A prompt message will be flashing showing Power
    ON in progress for projector.
  • All sources will appear on the panel, wait till
    flashing stop then can selected the require
    source.
  • Initial Volume at 10. Presenter adjust the
    require level for his MIC.
  • House light at default Medium level when using
    Presenter using Computer/Video Mode.

6
Updated on 20-11-2006
Presenter using OHP
If Main Projector cannot turn ON Activate
Emergency Projector
Presenter using Computer/Video
House light
Main Projector Activated
Master Volume
Notebook 2
Notebook 1
Computer at Console
HIGH
80
Up
Down
Visualiser
MED
VCR
LOW
DVD
OFF
Please select one source
Turn ON Projector
Remember to select this Icon To Shut down all
Audio video System after use
  • Presenter using Computer/Video mode
  • Once Flashing sign for Power ON in progress for
    projector stop. A prompt sign shown.
  • Presenter need to select the require source.

7
Updated on 20-11-2006
Presenter using OHP
If Main Projector cannot turn ON Activate
Emergency Projector
Presenter using Computer/Video
Main Projector Activated
House light
Master Volume
Notebook 2
Notebook 1
Computer at Console
HIGH
80
Up
Down
Visualiser
MED
Up
Down
VCR
LOW
50
DVD
OFF
Console PC Volume
Turn ON Projector
Remember to select this Icon To Shut down all
Audio video System after use
  • Presenter using computer/video mode (computer
    source)
  • Presenter select computer at console, Icon will
    highlight.
  • PC Volume by default at 50 when computer at
    console is selected.
  • Presenter can adjust PC volume to higher level
    when playback source is soft without adjusting
    the Master volume.
  • Adjusting the Master Volume also affect the MIC
    and playback level.

8
Updated on 20-11-2006
Presenter using OHP
If Main Projector cannot turn ON Activate
Emergency Projector
Presenter using Computer/Video
Main Projector Activated
House light
Master Volume
Notebook 2
Notebook 1
Computer at Console
HIGH
80
Up
Down
Visualiser
MED
Up
Down
VCR
LOW
50
DVD
OFF
Notebook Volume
Turn ON Projector
Remember to select this Icon To Shut down all
Audio video System after use
  • Presenter using computer/video mode (Notebook
    source)
  • Presenter select Notebook 1, Icon will highlight.
  • Notebook Volume by default at 50 when Notebook
    source is selected.
  • Presenter can adjust Notebook volume to higher
    level when playback source is soft without
    adjusting the Master volume.
  • When selected to Notebook1 or Notebook 2, ONLY
    Notebook Volume show because only one audio cable
    is used.

9
Updated on 20-11-2006
Presenter using OHP
If Main Projector cannot turn ON Activate
Emergency Projector
Presenter using Computer/Video
Main Projector Activated
House light
Master Volume
Notebook 2
Notebook 1
Computer at Console
HIGH
80
Up
Down
Visualiser
MED
VCR
LOW
DVD
OFF
Turn ON Projector
Remember to select this Icon To Shut down all
Audio video System after use
  • Presenter using computer/video mode (Visualiser)
  • Presenter select Visualiser, Icon will highlight.
  • Manually turn Power ON at the Document unit and
    adjust focus, Zoom to require.
  • MIC level can adjust by the Master Volume.

10
Updated on 20-11-2006
Presenter using OHP
If Main Projector cannot turn ON Activate
Emergency Projector
Presenter using Computer/Video
Main Projector Activated
House light
Master Volume
Notebook 2
Notebook 1
Computer at Console
HIGH
80
Up
Down
Visualiser
MED
Up
Down
VCR
LOW
50
DVD
OFF
VCR Volume
Turn ON Projector
Select to Shut down all Audio video System
after use
Remember to select this Icon To Shut down all
Audio video System after use
  • Presenter using computer/video mode (VCR)
  • Presenter select VCR, Icon will highlight. The
    play functions for VCR will pop up.
  • VCR volume control by default at 50 when VCR
    source is selected.
  • Presenter can adjust VCR volume to higher level
    when playback source is soft without adjusting
    the Master volume.
  • House light can select to low for better viewing.

11
Updated on 20-11-2006
Presenter using OHP
If Main Projector cannot turn ON Activate
Emergency Projector
Presenter using Computer/Video
Main Projector Activated
House light
Master Volume
Notebook 2
Notebook 1
Computer at Console
HIGH
80
Up
Down
Visualiser
MED
Up
Down
VCR
LOW
50
DVD
OFF
VCR Volume
Turn ON Projector
Remember to select this Icon To Shut down all
Audio video System after use
  • Presenter using computer/video mode (VCR)
  • Presenter can select the VCR functions such as
    play, stop, pause, rewind and Forward.
  • When Play function is selected , Icon will be
    highlight once and goes off. Like wise for other
    functions.

12
Updated on 20-11-2006
Presenter using OHP
If Main Projector cannot turn ON Activate
Emergency Projector
Presenter using Computer/Video
House light
Main Projector Activated
Master Volume
Notebook 2
Notebook 1
Computer at Console
HIGH
80
Up
Down
MENU
Visualiser
MED
Up
Down
ENTER
VCR
LOW
50
DVD
OFF
DVD Volume
Turn ON Projector
Remember to select this Icon To Shut down all
Audio video System after use
  • Presenter using computer/video mode (DVD)
  • Presenter select DVD, Icon will highlight. The
    play and MENU functions for DVD will pop up.
  • DVD volume control by default at 50 when DVD
    source is selected.
  • Presenter can adjust DVD volume to higher level
    when playback source is soft without adjusting
    the Master volume
  • House light can select to low for better viewing.

13
Updated on 20-11-2006
Presenter using OHP
If Main Projector cannot turn ON Activate
Emergency Projector
Presenter using Computer/Video
Main Projector Activated
House light
Master Volume
Notebook 2
Notebook 1
Computer at Console
HIGH
80
Up
Down
MENU
Visualiser
MED
Up
Down
ENTER
VCR
LOW
50
DVD
OFF
DVD Volume
Turn ON Projector
Remember to select this Icon To Shut down all
Audio video System after use
  • Presenter using computer/video mode (DVD)
  • Presenter can select the DVD functions such as
    play, stop, pause, rewind, Forward and MENU.
  • When Play function is selected , Icon will be
    highlight once and goes off . Like wise for other
    functions.

14
Updated on 20-11-2006
Presenter using OHP
Presenter using Computer/Video
House light
Master Volume
HIGH
80
Up
Down
MED
Switching to Presenter using OHP Mode? Video
Projector will Turn OFF
LOW
OFF
cancel
Yes
Remember to select this Icon To Shut down all
Audio video System after use
  • If next Presenter is using OHP mode
  • Presenter select using OHP Menu, it will
    highlight. A prompt message will shown.
  • If Yes Icon is selected then it will
    switch to OHP Mode and Video Projector is switch
    OFF.
  • If cancel is selected will go back to Presenter
    using Computer/Video Mode.
  • 2) The Motorize screen will raised.
  • House lighting will go to high (by Default).
  • Master Volume remain at last stage.

15
Updated on 20-11-2006
Presenter using OHP
Presenter using Computer/Video
House light
Master Volume
HIGH
80
Up
Down
MED
LOW
OFF
Remember to select this Icon To Shut down all
Audio video System after use
  • Presenter at OHP mode
  • Main Projector will switch OFF and sign will
    flash. After some time the flashing stop.
  • During the flashing stage the Presenter can dim
    House light and Master volume control for MIC
    level.

16
Updated on 20-11-2006
Presenter using OHP
Presenter using Computer/Video
House light
Master Volume
HIGH
80
Up
Down
MED
Switching to Presenter using Computer/Video
Mode?
LOW
OFF
cancel
Yes
Remember to select this Icon To Shut down all
Audio video System after use
  • If Next Presenter switch to Presenter using
    Computer/Video mode
  • Presenter using computer/Video Menu will
    highlight. A prompt message will shown..
  • If Yes Icon is selected will bring to the Main
    projector Menu.
  • If No is selected will goes back to OHP Mode.

17
Updated on 20-11-2006
Presenter using OHP
If Main Projector cannot turn ON Activate
Emergency Projector
Presenter using Computer/Video
Main Projector Activated
House light
Master Volume
Notebook 2
Notebook 1
Computer at Console
HIGH
80
Up
Down
Visualiser
MED
VCR
LOW
DVD
OFF
FLASHING
Please Wait for 20 secs Power ON in
Progress For Projector
Turn ON Projector
Remember to select this Icon To Shut down all
Audio video System after use
  • Presenter using Computer/Video mode
  • Presenter using Computer/Video Menu will
    highlight. The Motorize screen will lowered.
  • A prompt message will be flashing showing Power
    ON in progress for projector.
  • All sources will appear on the panel, wait till
    flashing stop then can selected the require
    source.
  • Master Volume remain.
  • House light at default Medium level when at
    Presenter using Computer/Video Mode.

18
Updated on 20-11-2006
Presenter using OHP
If Main Projector cannot turn ON Activate
Emergency Projector
Presenter using Computer/Video
House light
Main Projector Activated
Master Volume
Notebook 2
Notebook 1
Computer at Console
HIGH
80
Up
Down
Visualiser
MED
VCR
LOW
DVD
OFF
Please select one source
Turn ON Projector
Remember to select this Icon To Shut down all
Audio video System after use
  • Presenter using Computer/Video mode
  • Once Flashing sign for Power ON in progress for
    projector stop. A prompt sign shown.
  • Presenter need to select the require source.

19
Updated on 20-11-2006
Presenter using OHP
If Main Projector cannot turn ON Activate
Emergency Projector
Presenter using Computer/Video
Main Projector Activated
House light
Master Volume
Notebook 2
Notebook 1
Computer at Console
HIGH
80
Up
Down
Visualiser
MED
Up
Down
VCR
LOW
50
DVD
OFF
Console PC Volume
Turn ON Projector
Remember to select this Icon To Shut down all
Audio video System after use
  • If no signal detected for an hour the projector
    will be at sleep mode (Projector on Power Saving
    Mode)
  • Presenter select Turn ON Projector Icon, This
    Icon will highlighted once and goes off.
  • This will trigger the Main Projector only to
    turn ON.
  • 2) Presenter need to select the source again if
    no computer input show on the video screen.
  • 3) When Turn ON projector Icon is select the
    motorize screen will lowered (Interlocked).
  • 4) PC volume remain at the last stage.

20
Updated on 20-11-2006
Presenter using OHP
If Main Projector cannot turn ON Activate
Emergency Projector
Presenter using Computer/Video
Main Projector Activated
House light
Master Volume
Notebook 2
Notebook 1
Computer at Console
HIGH
80
Up
Down
Visualiser
MED
Up
Down
VCR
LOW
50
DVD
OFF
Console PC Volume
Turn ON Projector
Remember to select this Icon To Shut down all
Audio video System after use
  • Presenter fail to Turn ON Main projector
  • After few attempts still cannot Turn ON Main
    Projector. (I.e. Main projector is faulty)
  • Select Activate Emergency Projector menu. This
    Icon will highlighted.
  • Once this Menu is selected will go to other page.

21
Updated on 20-11-2006
Presenter using OHP
If Main Projector cannot turn ON Activate
Emergency Projector
Presenter using Computer/Video
House light
Master Volume
Do you want to turn ON Emergency Projector?
HIGH
80
Up
Down
MED
LOW
OFF
Yes
Cancel
Remember to select this Icon To Shut down all
Audio video System after use
Presenter accidentally select Activate Emergency
Projector If Presenter accidentally activate the
Emergency projector Menu. A prompt sign show out.
22
Updated on 20-11-2006
Presenter using OHP
If Main Projector cannot turn ON Activate
Emergency Projector
Presenter using Computer/Video
House light
Master Volume
Do you want to turn ON Emergency Projector?
HIGH
80
Up
Down
MED
LOW
OFF
Yes
Cancel
Remember to select this Icon To Shut down all
Audio video System after use
  • If Presenter accidentally activate the Emergency
    Projector Menu
  • Presenter can select Cancel Icon to bring back
    to the Main Projector Menu.
  • Presenter can select Turn ON projector Icon to
    turn ON the Main projector again.

23
Updated on 20-11-2006
Presenter using OHP
If Main Projector cannot turn ON Activate
Emergency Projector
Presenter using Computer/Video
Main Projector Activated
House light
Master Volume
Notebook 2
Notebook 1
Computer at Console
HIGH
80
Up
Down
Visualiser
MED
VCR
LOW
DVD
OFF
Turn ON Projector
Remember to select this Icon To Shut down all
Audio video System after use
  • If Presenter accidentally activate the Emergency
    Projector Menu
  • Presenter can select Cancel Icon to bring back
    to the Main Projector Menu.
  • Presenter can select Turn ON projector Icon to
    turn ON the Main projector again.

24
Updated on 20-11-2006
Presenter using OHP
If Main Projector cannot turn ON Activate
Emergency Projector
Presenter using Computer/Video
House light
Master Volume
Do you want to turn ON Emergency Projector?
HIGH
80
Up
Down
MED
LOW
OFF
Yes
Cancel
Remember to select this Icon To Shut down all
Audio video System after use
  • Presenter to activate the Emergency Projector
  • If Yes Icon is selected will highlighted will
    turn ON the Emergency Projector Menu. At the same
    time the Main Projector is switch OFF.
    (Interlocking)

25
Updated on 20-11-2006
Please call CED AV Fault Control 6790 5343 or
6790 4254
Presenter using OHP
Presenter using Computer/Video
Emergency Projector is Activated
House light
Master Volume
Notebook 2
Notebook 1
Computer at Console
HIGH
80
Up
Down
Visualiser
MED
FLASHING
VCR
LOW
DVD
OFF
FLASHING
Please Wait for 20 secs Power ON in
Progress For Projector
Turn ON Projector
Remember to select this Icon To Shut down all
Audio video System after use
  • Presenter using Emergency Projector for
    Computer/Video mode
  • A prompt message will be flashing showing Power
    ON in progress for Projector.
  • Emergency Projector is Activated and Note to call
    CED is flashing .

26
Updated on 20-11-2006
Please call CED AV Fault Control 6790 5343 or
6790 4254
Presenter using OHP
Presenter using Computer/Video
Emergency Projector is Activated
House light
Master Volume
Notebook 2
Notebook 1
Computer at Console
HIGH
80
Up
Down
Visualiser
MED
VCR
LOW
DVD
OFF
Please select one source
Turn ON Projector
Remember to select this Icon To Shut down all
Audio video System after use
  • Presenter using Emergency Projector for
    Computer/Video mode
  • Once Flashing sign for Power ON in progress for
    projector stop. A prompt sign shown.
  • Presenter need to select the require source.
  • Emergency Projector is Activated and Note to call
    CED is flashing .

27
Updated on 20-11-2006
Please call CED AV Fault Control 6790 5343 or
6790 4254
Presenter using OHP
Presenter using Computer/Video
House light
Emergency Projector is Activated
Master Volume
Notebook 2
Notebook 1
Computer at Console
HIGH
80
Up
Down
Visualiser
MED
Up
Down
VCR
LOW
50
DVD
OFF
Console PC Volume
Turn ON Projector
Remember to select this Icon To Shut down all
Audio video System after use
  • Presenter using Emergency Projector for
    Computer/Video mode
  • Presenter select the computer at console and
    highlighted
  • Emergency Projector is Activated and Note to call
    CED is flashing .

28
Updated on 20-11-2006
Please call CED AV Fault Control 6790 5343 or
6790 4254
Presenter using OHP
Presenter using Computer/Video
House light
Emergency Projector is Activated
Master Volume
Notebook 2
Notebook 1
Computer at Console
HIGH
80
Up
Down
Visualiser
MED
Up
Down
VCR
LOW
50
DVD
OFF
Console PC Volume
Turn ON Projector
Remember to select this Icon To Shut down all
Audio video System after use
  • If no signal for an hour the projector will be at
    sleep mode (Emergency Projector at Power Saving
    Mode)
  • Presenter select Turn ON Projector Icon, This
    Icon will highlighted once and goes off.
  • This will trigger the Emergency Projector only
    to turn ON.
  • Presenter need to select the source again if no
    computer input show on the screen.

29
Updated on 20-11-2006
Please call CED AV Fault Control 6790 5343 or
6790 4254
Presenter using OHP
Presenter using Computer/Video
House light
Emergency Projector is Activated
Master Volume
Notebook 2
Notebook 1
Computer at Console
HIGH
80
Up
Down
Visualiser
MED
Up
Down
VCR
LOW
50
DVD
OFF
Console PC Volume
Turn ON Projector
Remember to select this Icon To Shut down all
Audio video System after use
If turn ON Projector Icon is select and cannot
turn ON the Emergency Projector 1) Lecturer call
CED for help or cancel the class.
30
Updated on 20-11-2006
Please call CED AV Fault Control 6790 5343 or
6790 4254
Presenter using OHP
Presenter using Computer/Video
House light
Emergency Projector is Activated
Master Volume
Notebook 2
Notebook 1
Computer at Console
HIGH
80
Up
Down
Visualiser
MED
Up
Down
VCR
LOW
50
DVD
OFF
Console PC Volume
Turn ON Projector
Remember to select this Icon To Shut down all
Audio video System after use
  • Presenter to Shut down the Audio and Video System
    after use
  • Presenter select Shut down all Audio Video
    System after use menu to shut down the system.
  • This menu will highlighted and goes off and get
    into another page.

31
Updated on 20-11-2006
Please call CED AV Fault Control 6790 5343 or
6790 4254
Presenter using OHP
Presenter using Computer/Video
House light
Master Volume
Do you want to Shut Down All Audio Video
System?
HIGH
80
Up
Down
MED
LOW
OFF
Yes
Cancel
Remember to select this Icon To Shut down all
Audio video System after use
  • Presenter to Shut down the Audio and Video System
  • A Prompt sign will shown.
  • If Yes Icon is selected will goes to next page.
  • If Cancel Icon is selected will bring back to the
    previous Menu

32
Updated on 20-11-2006
Please wait Audio and Video System is shutting
down House lighting will remind
100
0
  • Presenter to shut down all Audio and video system
    after use
  • Count down from 100 to 0 appear. Amplifier system
    is shut down in sequence.
  • Video Projector will shut down.
  • Audio and Video System will switch OFF but House
    lighting will remain.

33
Updated on 20-11-2006
  • System shut down after use and next Presenter to
    start using the Emergency projector
  • Initial stage on the Touch Screen Panel is black
    (ie Screen save Mode)
  • To start Presenter touch any area on the screen.
  • By default the Screen is raised.

34
Updated on 20-11-2006
Welcome to Nanyany Technological
University Lecture Room 2A
To turn ON the Amplifier System touch Icon
below
POWER ON AMPLIFIER SYSTEM
  • To turn ON the Amplifier system
  • Presenter touch the Power ON Amplifier System
    Icon
  • Once selected the Amplifier at control room will
    turn ON in sequence.

35
Updated on 20-11-2006
Presenter Using Computer/Video
Presenter Using OHP
Select one mode for Presentation
  • Presenter can choose one Presentation mode.
  • Presenter using computer/video or Presenter using
    OHP.

36
Updated on 20-11-2006
Presenter Using Computer/Video
Presenter Using OHP
Select one mode for Presentation
  • If Next Presenter choose Presenter Using OHP
    mode.
  • Presenter using OHP Icon will highlighted.

37
Updated on 20-11-2006
Presenter using OHP
Presenter using Computer/Video
House light
Master Volume
HIGH
10
Up
Down
MED
LOW
OFF
Remember to select this Icon To Shut down all
Audio video System after use
  • If Presenter switching to OHP Mode
  • Presenter using OHP Menu will highlight.
  • 2) The Motorize screen will raised.
  • House lighting will go to high (by Default).
  • Master Volume at 10 default level. Presenter
    need to adjusted MIC to require level..

38
Updated on 20-11-2006
Presenter using OHP
Presenter using Computer/Video
House light
Master Volume
HIGH
80
Up
Down
MED
Switching to Presenter using Computer/Video
Mode?
LOW
OFF
cancel
Yes
Remember to select this Icon To Shut down all
Audio video System after use
  • If Next Presenter switching to Presenter using
    Computer/Video Mode
  • Presenter select Presenter using Computer/Video
    Menu will highlight.
  • A Prompt sign will shown. If Yes is selected, the
    Emergency Projector is activated.
  • If cancel is selected will bring to the OHP
    mode.
  • 3) The Motorize screen will lowered.
  • 4) House lighting will go to Medium.
  • 5) Master Volume remain

39
Updated on 20-11-2006
Please call CED AV Fault Control 6790 5343 or
6790 4254
Presenter using OHP
Presenter using Computer/Video
Emergency Projector is Activated
House light
Master Volume
Notebook 2
Notebook 1
Computer at Console
HIGH
80
Up
Down
Visualiser
MED
FLASHING
Up
Down
VCR
LOW
50
DVD
OFF
FLASHING
Console PC Volume
Please Wait for 20 secs Power ON in
Progress For Projector
Turn ON Projector
Remember to select this Icon To Shut down all
Audio video System after use
  • Presenter using Emergency Projector for
    Computer/Video mode
  • A prompt message will be flashing showing Power
    ON in progress for Projector.
  • Emergency Projector is Activated and Note to call
    CED is flashing .

40
Updated on 20-11-2006
Please call CED AV Fault Control 6790 5343 or
6790 4254
Presenter using OHP
Presenter using Computer/Video
Emergency Projector is Activated
House light
Master Volume
Notebook 2
Notebook 1
Computer at Console
HIGH
80
Up
Down
Visualiser
MED
VCR
LOW
DVD
OFF
Please select one source
Turn ON Projector
Remember to select this Icon To Shut down all
Audio video System after use
  • Presenter using Emergency Projector for
    Computer/Video mode
  • Once Flashing sign for Power ON in progress for
    projector stop. A prompt sign shown.
  • Presenter need to select the require source.
  • Emergency Projector is Activated and Note to call
    CED is flashing .
About PowerShow.com