PowerPoint-Pr

1
(No Transcript)
2
THE COMPANY
OPTIKRON, your partner for micro-optics,
assemblies and optical coatings was founded in
1992 in the optics and technology region of Jena.
We are specializing in the efficient and flexible
production of customized plano-optics with
smallest dimensions, assembling of micro-optical
groups and systems as well as developing and
manufacturing customized optical coatings.
Our competence, the high motivation of our staff
and the technological possibilities enable us,
with products of highest quality to contribute to
powerful and innovative applications of our
customers.
The Know How and the experiences in the micro-
and precision optics manufacturing are an solid
basis for manufacturing complex optics with
continuously highest precision

• in-house capabilities
• technological processes and technical equipment
  for the whole production process from raw glass
  block to finished plano-optics of high precision
  and micro optics
• assembling and measuring laboratories
• mechanical department for jigmaking and
  prototyping
• coating department with latest coating machines
  for plasma-ion assisted evaporation processes

3
COMPETENCE Outstanding experiences in precision
optics manufacturing which we bring into our
products from protoype to the serial production.
CUSTOMER ORIENTATION Customized products and
inspection techniques, on-demand production and
various delivery options.
HIGH PRECISION Ensuring the high product quality
by permanent process development, consistently
quality assurance in each production step and
inspection of each outgoing component.
EFFICIENCY Powerful processes, flexible
production possibilities and a cost-conscious
organizational structure.
FLEXIBILITY Realizing special product variations
and realizing with customer coordinated processes.
4
QUALITY
QUALITY ASSURANCE
We are committed to highest quality requirements
at our products and are conscious that our
products are used in fastidious
applications. Therefore it is important for us
that everyone of our workforce themselves has a
high consciousness about the needed accuracy in
each production step and everyone has to work
conscientiously in order to guarantee that only
products with continuously high quality will be
sent out to our customers.
To ensure this quality commitment we develop and
control operational sequences, examine the
compliance with regulations and use modern test
and measuring procedures in each production step.
A final inspection of each single component
before shipment is completing the process.
100 Inspection
5
OPTIKRON'S PRODUCTS and SERVICES
MICRO-OPTICS precision components
ASSEMBLIES functional groups and systems
OPTICAL COATINGS coating design and production
CONTRACT PRODUCTION, PRODUCTION SERVICES,
DEVELOPMENT

• NOT ONLY OPTICS!... furthermore Optikron offers
• services for technological and constructional
  product development
• development and production of customized
  coatings on customers substrates
• assembling of micro-optical and opto-mechanical
  subsystems
• supplying precision blanks, semi-finished
  products and partial processing of customer
  optics

6
MICRO PRISMS

• to custom specifications in dimensions from 0.3
  to approx. 7 mm
• (individually variations and special forms as
  well as standard prisms)
• made from all optical glasses and fused silica
• coatings from edge to edge without margins

• with autoclavable coatings for modern medicine
  devices
• with high efficiency coatings for high end laser
  systems
• with highest precision and surface quality

applications endoscopy optics, laser optics,
optics for fibers, optics for sensors, and
optical data transmission
7
PRISM GROUPS

• composite optical elements (arrays) for high
  power diode lasers
• made of prisms and thin plates by wringing
  them together into optical contact
• useable for high power applications, complex
  groups of very high precision,
• with accurately sharp edges
• Director- and Redirector-Units for high
  brightness diode lasers

• groups of prisms which are cemented together gt
  Compact-Prisms
• micro optics mounted on fibers
• beamsplitter groups down to 0.5 mm

• applications
• prism groups (arrays) for high power diode
  lasers and diode stacks
• for beam shaping and fiber coupling, step
  mirrors
• cemented optical groups for endoscopy and
  medical devices

8
MIRRORS, PRISM RODS and LIGHT-CONDUCTING RODS

• flat or angled mirrors gt with metallic or
  dielectric coatings
• small optical rods
• with angular and / or parallel surfaces of
  high precision
• rods with prism function by angled optical
  surfaces
• light-conducting rods
• mirrored-rods

applications mirrors endoscopes, laser mirrors,
optics for sensors, integrator rods, mirrors for
light sources
9
OPTICAL COATINGS
Based on experiences of decades, we are using
modern software for generating customized coating
solutions with optimal designs tailored to the
needs of our customers applications. Plasma-ion
assisted evaporation processes in latest coating
machines These processes are generating coatings
with improved characteristics and they allow the
realization of a lot of high performance coatings
with relatively low temperatures during the
process. We have developed technological
solutions for realizing optical coatings without
uncoated margins on miniaturized optics. We are
also manufacturing special coatings and
autoclavable coatings for micro optics used in
modern medical devices like micro optics for
endoscopes.
coating services for customers substrates as well
as complete optical components. antireflection
coatings, metallic mirrors, high and partially
reflective coatings, filters and beam splitter
coatings
10
ASSEMBLIES and SUBSYSTEMS

• functional groups and subsystems
• optical and opto-mechanical assemblies
• mounted micro-optics

• Developing and realizing opto-mechanical
  subsystems
• Assembling of functional groups as contract
  production
• Development and Manufacturing of mounts for
  small
• optics as well as mounting of micro optics

applications endoscopy, medical devices, laser
systems, sensor systems, light sources
11
CONTRACT PRODUCTION and PRODUCTION SERVICES

• ground and polished blanks - directly to
  customers needs
• grinding and polishing of customers substrates
• dicing of customers substrates or optics (using
  4 axis CNC dicing
• systems for high precision cuts)
• plates with diced raster area plates up to 200
  mm are possible to raster
• assembling of functional groups and micro
  optical subassemblies
• coating design and optical coatings for
  customers substrates

TOOLS FOR MICRO COMPONENTS
Optikron is also distributing special tools of
proven industrial standard for handling and
processing micro components