Printer cables - PowerPoint PPT Presentation

1 / 8
About This Presentation
Title:

Printer cables

Description:

25-pin DB male connector on cable connects to DB ... 3. Writing. 4. Developing. 5. Transferring. 6. Fusing. California. Cows. Won't. Dance. The. Fandango! ... – PowerPoint PPT presentation

Number of Views:98
Avg rating:3.0/5.0
Slides: 9
Provided by: web3
Learn more at: http://web.utk.edu
Category:

less

Transcript and Presenter's Notes

Title: Printer cables


1
Printer cables
  • Maximum length for parallel cable is 15 feet.
    (some say 10)
  • 25-pin DB male connector on cable connects to DB
    female connector on motherboard
  • 36-pin Centronics connector on printer end of
    connecting cable

2
LPT Ports
3
Parts of a laser printer
  • Photosensitive drum- reacts to light
  • holds a charge except where it is exposed to
    light
  • Paper transport- 4 types of rollers that move
    paper through printer
  • This is where most paper jams occur!
  • Primary corona- main corona
  • located inside toner cartridge
  • uniformly charges drum to -600V

4
Parts cont.
  • Transfer corona- transfers image from drum to
    paper
  • transfer corona charges the paper
  • the charged paper pulls toner from drum to paper
  • Fusing roller- permanently melts toner to page
  • this is why laser printer pages are hot
  • Controller- includes printer RAM
  • Power supply- high-voltage AC and DC

5
Steps in laser printing
  • Cleaning
  • Before page is printed, remnants of previous
    print are swept away
  • Rubber blade sweeps left-over toner away
  • Fluorescent lamp removes any remaining electrical
    charge on drum
  • Conditioning
  • The primary corona (AKA main corona) wire
    uniformly charges drum to -600V

6
Steps cont.
  • Writing
  • image of page is created on drum
  • where laser beam contacts drum, the charge is
    reduced to -100V from -600V
  • the controller loads sheet of paper to the
    registration roller of the paper transport
    system
  • Developing
  • Creating print image on drum
  • the iron particles in toner cartridge are
    attracted to the areas of drum exposed by laser

7
Steps cont.
  • Transferring
  • image transferred to paper
  • sheet of paper at registration roller is given a
    positive charge
  • negatively charged toner on drum is attracted
    onto positively charged paper
  • Fusing
  • fusing rollers apply heat and pressure to toner
  • toner melts and permanently bonds to paper

8
Remembersteps of laser print
  • 1. Cleaning
  • 2. Conditioning
  • 3. Writing
  • 4. Developing
  • 5. Transferring
  • 6. Fusing
  • California
  • Cows
  • Wont
  • Dance
  • The
  • Fandango!
Write a Comment
User Comments (0)
About PowerShow.com