Coastal Landforms - PowerPoint PPT Presentation

1 / 42
About This Presentation
Title:

Coastal Landforms

Description:

Coastal Landforms Erosional and depositional landforms Defining the Coastal Area / Zone The coastline is the line where the land and sea meet. The coast is a zone or ... – PowerPoint PPT presentation

Number of Views:2730
Avg rating:3.0/5.0
Slides: 43
Provided by: Nad260
Category:

less

Transcript and Presenter's Notes

Title: Coastal Landforms


1
Coastal Landforms
  • Erosional and depositional landforms

2
Defining the Coastal Area / Zone
  • The coastline is the line where the land and sea
    meet.
  • The coast is a zone or strip of land extending
    from the coastline, which borders the sea to
    where the land rises inland. Its limit is marked
    by the level of high tide.
  • The shore is the zone which lies between mean
    high low water mark and high water mark and
    constitutes both the backshore and foreshore.
  • Backshore is the zone between mean high tide
    level and the coastline.
  • Foreshore is the lower zone of the beach lying
    between the low and high water level.

3
Defining the Coastal Area / Zone
4
Features Produced by Wave or Marine Erosion
  • Cliffs
  • Headlands and bays
  • Waves, arches and stacks
  • Wave-cut platforms
  • Blow Holes or Gloups and Goes

5
Cliffs
  • Most fundamental and ubiquitous feature of rock
    coastlines. Variations based on differences in
  • Lithology
  • Jointing
  • Structure
  • Degree of exposure
  • Erosional History
  • The dip of the rock
  • Wave action
  • Sub-aerial erosion

6
Dead or a(Live)
  • Classification into Live or Active cliffs, those
    which are experiencing wave erosion , or
    experiencing sub aerial activity, gullying, soil
    creep or slumping. They often have free-faces
  • Dead cliffs are isolated from the sea by sand,
    shingle, sand-marsh deposits, and rock marsh

7
Cliff Development
  1. Removal of a wedge-shaped mass of rock, ( a
    notch) largely by the mechanical action of
    breaking waves, often utilizing some weakness
  2. Once this has been initiated, basal attack,
    weathering and slumping, gullying and
    mass-movement wear down the headland
  3. The cliff increases in height and the wave-cut
    platform is extended

8
Cliff Development
  • 4 As the wave cut platform develops, the process
    slows down as the shallower water over the
    platform slows down, and the basal attack is less
    intense.

9
Headland and Bays
  • Where there are alternating beds of hard and soft
    rocks, the hard rocks offer a greater resistant
    to erosion . They eventually stands out as
    headlands, that is, as promontories with steep
    cliff sides projecting out into sea.
  • The softer rocks are easily eroded as they are
    less resistant to marine erosion. In due course
    an indentation or cure in the land, called a bay
    is formed. Bays are separated by headlands.

10
Cliffs, Headland and Bays
11
(No Transcript)
12
Processes
  • Several other processes are found in and on
    cliffs, these include
  • Sub-aerial processes ( Weathering and Mass
    movement) e.g. slumping, sliding, soil-creep,
    freeze-thaw, carbonation, salt-crystallization,
    biological weathering

13
Rates of Cliff Recession
  • Variation based on the
  • Structure of the rock
  • The Aspect
  • The vegetation
  • Mans impact
  • Protect ional features

14
Notches
  • These are grooves that are eroded into cliffs
  • Between mean high tide and low tide
  • Extremely important in cliff development
  • Develop in areas of weakness
  • Variations include smooth rounded rocks in
    limestone and chalk ( chemical action)

15
(No Transcript)
16
Wave Cut Platforms
  • Tremendous variation
  • Some are temporary, some permanent.
  • Some are covered with sand and shingle, others
    have channels, trenches and hollows
  • In hard rock the platforms are poorly developed
    whereas in soft homogenous rock there are broad,
    even surfaces with minor furrows

17
Wave-cut platforms
  • Formed by wave abrasion, and solution
  • Delicate balance based on the resistance of the
    rock
  • Weak rock will collapse
  • Strong rock resistance will be minimal

18
Rampanalgas- Mean Low tide
19
Wave-cut platform at mean high tide
20
Caves, arches and stacks
  • Caves a natural underground hollow formed by
    erosion
  • Arches formed by the wearing away of narrow
    headland, generally by the formation of two
    back-to back caves which eventually join. These
    are temporary and eventually collapse
  • Stacks- Tall isolated pillars of rock that are
    free standing in the sea, alone or in a group.
    They may result from the collapse of an arch and
    are normally residual features formed from a
    former headland
  • Stumps rocky platforms offshore that may be
    covered at high tide, but may be uncovered
    throughout the day.

21
Arch
22
Arch
23
Stacks
24
Stacks
25
Geos
  • Long, narrow gorge-like inlets, normally formed
    because of the collapse of a cave

26
(No Transcript)
27
(No Transcript)
28
(No Transcript)
29
Features Produced by Marine Deposition
  • Beaches
  • Spits and Bars
  • Tombolos
  • Mudflats
  • Sand Dunes

30
Beaches
  • A beach is an accumulation of materials such as
    boulders, pebbles, shingle, sand and mud on a
    sloping or shelving ground. The waves which
    break offshore result in its erosive power
    decreasing . This is caused by the swash and
    backwash which deposits materials on the shore.

31
Beaches
32
WHAT ARE SPITS?
  • Spits are generally linear deposits of beach
    material attached at one end to land and free at
    the other. Where the direction of the coast
    changes, sediment carried by longshore drift may
    form a tongue of sand and other material, which
    is called a spit

33
HOW ARE SPITS FORMED?
Spits are formed when a large accumulation of
material forms a narrow strip of land that juts
out into the sea but is still connected to the
mainland.Where a river carries large amounts of
material into a bay, waves moving obliquely will
transport the material in a diagonal direction
along the beach by the process of longshore
drift. An example of a spit is the Cocal spit at
the mouth of the Nariva River on the east coast
of Trinidad
  • .

34
CONDITIONS NECESSARY TO FORM A SPIT
  • There must be a good supply of sand and other
    sediments
  • Waves must approach the coast at an angle, so
    that longshore drift moves material along the
    coast
  • The sea must be relatively shallow
  • The sea is usually fairly calm, with low-energy
    constructive waves

35
WHAT ARE TOMBOLOS?
  • A linear deposit of sand or stones, formed by
    longshore drift, which joins an island to the
    mainland is called a tombolo.
  • An example of a tombolo is the Palisadoes in
    Jamaica

36
TOMBOLOS
37
(No Transcript)
38
MUDFLATS
  • Mudflats are lowlying parts of the coast which
    are submerged at high tide and low tide. They are
    normally located behind a bar or sandpit or
    besides estuaries and are comprised of silt or
    clay. In tropical areas mudflats support dense
    tropical mangrove vegetation community often with
    large area of swamp.

39
MUDFLATS
40
SAND DUNES
  • Some sea shores consist of ridges of sand
    deposits by waves and shaped by wind. These are
    termed sand dunes. They are confined to coastal
    areas which are lowlying and are above sea high
    water tidal level.
  • The onshore winds blowing across sandy beaches
    constantly renew and shape the sand deposits.
    Vegetation on the coast trap the sand and causes
    it to be stationary .
  • Sand dunes are common in Port Royal in Jamaica
    and Sandy Belt in Guyana.

41
Sand Dunes
42
THE END Prepared by Ms . Fouchong
Write a Comment
User Comments (0)
About PowerShow.com