The Lean Enterprise - PowerPoint PPT Presentation

1 / 31
About This Presentation
Title:

The Lean Enterprise

Description:

Title: CAP Tools for Six Sigma Notes Author: Pam Dennis Last modified by: The Youngers Created Date: 3/27/1998 3:31:56 PM Document presentation format – PowerPoint PPT presentation

Number of Views:178
Avg rating:3.0/5.0
Slides: 32
Provided by: PamD156
Category:

less

Transcript and Presenter's Notes

Title: The Lean Enterprise


1
The Lean Enterprise
  • Introduction to TPM Total Productive Maintenance

Lean Foundations Continuous Improvement Training
2
Learning Objectives
  • Learn the basic philosophy of TPM
  • Explain OEE and how it contributes to a TPM
    project, explore OEE components define and
    calculate OEE
  • List 6 major components of equipment loss
  • Review and adopt the 7 steps to Autonomous
    Maintenance

3
TPM The Need
  • Process Industry relies heavily on equipment that
    is integrated and runs continuously
  • When down, losses are costly
  • With lower inventories, machines need to be
    reliable
  • Machining and Assembly industries becoming more
    mechanized to save manpower and do difficult jobs
  • More machines to maintain
  • Need to save energy

4
TPM The Philosophy
  • TPM aims at using equipment to its maximum and
    aids in reducing Life Cycle Costs (LCC)
  • In other words - going all out to eliminate
    the Losses (Waste) caused by the equipment
  • TPM improves work activities that deal with
    Equipment Set-up, Operating parameters,
    Maintenance, Tear down, Repairs and Breakdowns
  • It specifically aims at the complete elimination
    of the six major losses while striving for a
    goal of zero unscheduled downtime

5
TPM - The Six Major Losses (Waste)
  • Downtime Losses
  • (1) Equipment failures
  • (2) Set-up and adjustments
  • Speed Losses
  • (3) Idling and minor stoppages
  • (4) Reduced speed (actual operating
  • vs. designed)
  • Defect Losses
  • (5) Defects in process
  • (6) Reduced yield between start of
  • production and stable production

6
OEE Formulas
Loss Measure Formula
Metric
Availability example Efficiency
example Ratio of Quality Products
example
Load Down Time Load Time 460 min 60
min 460 The
Theoretical Cycle Time x Processed Qty
Operating Time 0.5/ unit x 400 units
400 minutes Processed Amount Amount of
Defects Processed Amount 400 8
400
1. Unexpected Eq. Breakdown 2. Set-up
adjustments 3. Idling and minor stoppages 4.
Reduced speed 5. Defects in Process 6. Reduced
Yield Overall Equip. Effectiveness

x 100 87 x 100
50 x 100 98






.87 x .50 x .98 46.2
7
OEE Pareto Analysis by Loss Category
Overall Equipment Effectiveness
Loss 1 2
Loss 3 4
Loss 5 6
46.2 OEE
8
TPM attacks 6 major Losses plus Elimination of
other Wastes (Mura, Muri, Muda)
  • Operator Time Losses
  • Manpower losses due to operation time being done
    more slowly than standard time (Cycle Time gt
    Standard Time)
  • Material Losses
  • Losses in yield due to inherent waste (cut-off
    stock, set-up pieces, prototype, etc)
  • Energy losses such as electricity, gas, and water
    when machinery is not doing value-added work
  • Idling losses due to inadequate sensors and
    product buildup on conveyors and chutes

9
Best PracticesWorld-Class Goals (A TPM Vision)

Before After Availability
87 gt 90 Performance Efficiency 50 gt
95 Ratio of Quality (Yield) 98 gt
99 Overall Eq. Effectiveness 42.6 gt 85
10
TPM Operational Goals (Qualitative)
  • Increase number of suggestions
  • Improve level of teamwork of shop floor
  • Improve cross-functional teamwork
  • Establish maintenance throughout the total
    equipment life cycle
  • People maintain their own equipment
  • Machines available for just-in-time (JIT)
    application
  • Improve machine availability
  • Improve working environment (6S)
  • Improve Corporate culture and image
  • Improve Business performance

11
TPM Operational Goals (Quantitative)
  • Cost Reductions
  • Actual and to be reduced
  • Energy savings
  • Maintenance
  • Equipment Efficiencies
  • Zero failures (ultimate goal)
  • MTBF (mean time between failures)
  • MTTR (mean time between repairs)
  • Idle Time

12
TPM Operational Goals, cont. (Quantitative)
  • Safety
  • Zero accidents
  • Quality
  • Zero failures
  • Zero complaints
  • Education
  • Hours of training/ number of sessions
  • Number of KAIZEN projects
  • Number of Suggestions

13
TPM Definition of Total
  • Total Effectiveness
  • Reduction in losses of all equipment to optimize
    its effectiveness and improve costs
  • Total Maintenance
  • Involves the whole maintenance system inclusive
    of equipment manufacturer, equipment engineering,
    and equipment user to improve maintainability
  • Total Participation
  • Everyone has a role to make TPM work
  • Management to set policy
  • Middle management, staff to support and lead
  • Maintenance to maintain and train
  • Operators to take on new maintenance challenges

14
TPM Role of Maintenance Function
  • Provides technical support for autonomous
    maintenance done by operators
  • Restores deteriorated equipment through checks,
    inspections, and overhauls
  • Identifies Design weaknesses and improves the
    equipment to error-free function (via poka-yoke)
  • Improves technical maintenance skills for checks,
    inspections, and overhauls

15
TPM Role of Operator Function
  • Maintains basic condition (cleaning and
    lubrication)
  • Maintains proper condition and standards for
    equipment usage
  • Partially restores deterioration
  • Basic skill levels in
  • Changeover and set-up
  • Reduction of minor stoppages and adjustments

16
TPM Autonomous Maintenance
  • Definition
  • Operations maintains its own equipment
  • Utilize 7-step plan
  • (Source Japan Institute of Plant
    Maintenance)

17
7 Steps to Autonomous Maintenance
  • Step 1 Initial clean-up (External)
  • Kick-off program
  • Closely aligned with 6S (5S 1)
  • Management and Staff show commitment
  • Clean, Sand and Paint
  • Identify sources of defects
  • Gauge hidden
  • Limit switch buried in debris
  • Crack in Housing

18
7 Steps to Autonomous Maintenance
  • Step 2 Stop sources of defects (External)
  • Ask why ? five times
  • Replace parts with cracks
  • Replace worn seals
  • Teach Operators how to modify equipment
  • Conduct Set-up Workshops Practice Set-ups
  • Modify Equipment for easier checking and to
    eliminate sources for debris and contamination
  • Guards
  • Chip removal
  • Acrylic covers to see V - belts and moving parts

19
7 Steps to Autonomous Maintenance
  • Step 3 Standards Formulation
  • Standards for clean-up and checking
  • What equipment should be cleaned and checked?
  • What points should be checked?
  • Who should check?
  • What check sheet should be used?
  • How to react to changes.
  • Standards are to capture what has been learned
  • in steps 1 and 2

20
7 Steps to Autonomous Maintenance
  • Step 4 Overall Checkup (Internal)
  • Leaders (1st line Supervisors) trained
  • Hydraulics
  • Air Pressure
  • Electrical/ Electronics
  • Lubrication
  • Mechanical
  • One point lessons developed (Visual Management)
  • Team up Engineers, Maintenance, and Operators
  • Tear down equipment
  • Analyze defects
  • Present findings

21
7 Steps to Autonomous Maintenance
  • Step 5 Autonomous Checkup
  • Develop Standards for routine internal checkup
  • Hydraulics
  • Air Pressure
  • Electrical/ Electronics
  • Lubrication
  • Mechanical
  • Operator executes routine checks

22
7 Steps to Autonomous Maintenance
  • Step 6 Orderliness and Tidiness
  • Improve on Supplier Activity
  • Spare parts supply partners
  • Spare parts stores
  • Spare parts inventory
  • Improve on Tool Activity
  • Tool Crib orderliness
  • Tools frequently used at work station
  • (refer to Visual Management/ Visual Control)

23
7 Steps to Autonomous Maintenance
  • Step 7 All out Autonomous Management
  • Process never ends
  • Metrics
  • Audits
  • Each process post Result (actual) against Goal
    (target)
  • Zero lost time accidents
  • Zero Defects
  • Zero Breakdowns
  • Zero set-up time or at least lt 10 minutes
  • Practice Quick Changeovers/ SMED (see separate
    module)
  • Utilize Accountability Meetings (see separate
    module)

24
TPM Kaizen and Reliability Maintenance
  • KAIZEN (see separate module)
  • SWAT Team approach to major problems
  • (Focus improvement effort around 6 big
    Losses)
  • Reduction in Changeover/ Set-up time
  • RELIABILITY
  • Driven by Pareto Analysis to prioritize
  • Data based
  • Reduction in MTTR
  • Increase in MTBF

25
Reliability Maintenance
  • Meantime to Failure (Goal is to maximize)
  • Machine Breakdown
  • Tool Breakdown
  • Part Failure
  • Meantime to Repair (Goal is to minimize)
  • Diagnose problem
  • Correct problem
  • Set up Machine to make good parts
  • Spare parts control
  • Analyze using Statistical Tools
  • Reliability Measures
  • Problem Solving Tools
  • Vibration Analysis Tools

26
TPM - Reliability Kaizen Examples
  • 1) Tool cutting Tip (Nissan Motors) Life Cycle
    45 pieces
  • KAIZEN 1 Vibrational analysis to optimize
    rotational speed. Life cycle 132 pieces.
  • KAIZEN 2 Analysis of wear pattern to optimize
    tool geometry. Life cycle 305 pieces.
  • 2) Tool cutting (Toyota Motors) Tool expensive
    and takes long time to set up
  • KAIZEN 1 Reduced set-up time from 15 minutes
    to less than 10 seconds.
  • KAIZEN 2 Studied correlation between life of
    tool and number of cuts between sharpening
    increase life of tool five-fold.

27
Planned Maintenance Best Practices
  • Maintenance department primarily responsible
  • Re-adjustment of Machines to bring back to
    original state
  • Feedback information to Maintenance Prevention
    Group
  • Collection of Reliability Data
  • MTBF
  • MTTR
  • Finding and coping with chronic defects
  • Machine accuracy control (calibration)
  • Schedule boards (Visual Management)
  • Control of
  • Spare Parts
  • Lubrication
  • Vibrational Analysis

28
Maintenance Prevention Best Practices
  • New equipment design integrated w/ New Product
    Introduction (NPI) efforts
  • Input from Reliability Maintenance
  • Input from Preventative Maintenance
  • Input from KAIZEN activities
  • Life Cycle Costing
  • Design reviews (Operators, Supervisors,
    Engineers)
  • Assembly at Supplier
  • Final Inspection at Supplier
  • Maintenance and Operations Manual preparation
  • Safety Issues visible, aware and worked
  • Preventative Maintenance Schedule posted,
  • adhered to

29
TPM Summary
  • Total Productive Maintenance is about
  • improved equipment performance
  • increased equipment availability
  • increased equipment FPY (first pass
  • yield) or also called FTT (first time
    through)
  • reduced emergency downtime
  • increased return on investment
  • increased employee skill levels
  • increased employee empowerment

30
TPM Breakout Activity
  • With a small group,
  • With regard to Maintenance - Decide at least 3
    new improvements to put into place in your area.
  • Decide at least 3 new measures/ metrics to adopt
    to sustain your Maintenance activities.
  • Present your plan to Supervision.

31
The Lean Enterprise
  • Introduction to TPM Total Productive Maintenance

Lean Foundations Continuous Improvement Training
Write a Comment
User Comments (0)
About PowerShow.com