John Rys

1
DaqBook, DaqScan, DaqLab, Personal Daq, DaqBoard
USB Overview

• John Rys
• Product Support Engineer

2
Ethernet DaqBooks
3
DaqBook/2001 and /2005

• The /2001 and /2005 models provide
• P1, P2, P3 on the rear panel (vs. front)
• Extended temperature operation (-30C to 70C) (
  70C)
• Slim 1U high package

4
DaqBook/2001 and /2005

• DaqBook/2001 and /2005 are building blocks of a
  modular data acquisition system using DBK options

5
DaqBook/2020

• The /2020 offers volts, thermocouples frequency,
  analog output, and digital I/O all-in-one-box!

6
DaqBook/2020 Features

• Thermocouple Measurements
• 14 TC inputs via front-panel mini-TC jacks
• Any TC type can install into any input
• TCs are scanned at 200 kHz/channel
• Additional TC can be added via DBK80 series and
  DBK90

7
DaqBook/2020 Features

• Voltage Measurements
• 16 differential volts inputs via front-panel BNC
  connectors
• 13 programmable input ranges from 10 V to 156 mV
• 200 kHz, 16-bit measurements

8
DaqBook/2020 Features

• Four 16-bit, 100 kHz DAC outputs via front-panel
  BNC connectors
• Four 16-bit, 10 MHz frequency inputs via
  front-panel BNC connectors (can be combined into
  32-bit counters)
• Two 16-bit, 1 MHz timer outputs via front-panel
  BNC connectors
• External Trigger Input and External Clock input
  via front-panel BNC connectors

9
DaqBook/2020

• Rear-panel P1 connector accepts up to 14 DBK
  options (presuming 16 ch options)
• Rear-panel P2 connector provides 24 digital I/O
  (expandable up to 256 ch with DBK20 family
  options)

P1 for analog expansion
P2 for digital I/O
10/100 base T Ethernet
DC power input
SYNC connector
10
DaqBook/2020

• Built-in 10/100BaseT Ethernet
• SYNC connectors for multi-box applications

11
DaqBook/2020 vs WaveBook/516E

• DaqBook/2020 WaveBook/516
• Speed 200 kHz 1 MHz
• Voltage channels 16 8
• TC inputs 14 0
• Analog outputs 4 0
• Frequency inputs 4 0
• Digital I/O 24 16
• Expansion capacity 256 72

12
DBK90

• 56 TC channels for DaqBook systems (not DaqBoard
  or LogBook compatible)

13
DBK90

• Any TC type can be connected to any input using
  standard mini TC connectors
• Multiple DBK90s can be attached together
  (without cables)
• Mounting brackets are available to attach DBK90
  to DaqBooks

14
DBK90

• Rack-mount kit for large-channel applications

15
DBK90

• Reading rate with DBK90 is 1 msec per channel
  (vs 5 µsec for other DBK options)
• Other channels in the system, such as volts, are
  measured at 5 µsec per channel
• Up to 896 DBK90 channels can be connected to one
  DaqBook

16
DaqScan/2000 Series
17
DaqScan/2000 Applications

• Add DBK207 for isolated volts inputs
• Add DBK207/CJC for isolated TC inputs

18
DaqScanApplications/2000

• Add DBK208 and DBK210 for isolated high-voltage
  digital inputs and control outputs

19
DaqScan/2000 Applications

• Add DBK85 for 16 differential voltage inputs

DBK85 with rack-mount kit
20
DaqScan/2000 Applications

• Add DBK60 for custom applications using DBK cards

DBK60 with cards installed
21
DaqScan/2000 Series Features

• 2 DaqScan models provide the same analog I/O,
  digital I/O, and frequency I/O as the
  DaqBook/2000
• Depending on the model, P1, P2, and P3 are
  provided on the rear panel for signal
  connections

22
DaqScan/2000 vs DaqBook

• 1U high, 19 rack enclosure vs. portable package
• Operates in 0 to 50C (vs -30 to 70C)
• AC powered (vs DC)
• Low-cost digital I/O only version
• Always used along with instruments from other
  suppliers
• Continuous data transfer from the DaqScan to the
  PC
• Supported with IVI- COM drivers

23
DaqScan/2000 Series Software

• Most customers will write their own application
  in either NI LabView, DASYLab, Visual Basic, or
  C
• DaqView is included for set-up and signal
  verification

24
DaqLab/2000 Series
Two DBK expansion slots
AC powered
Removable screw terminals
25
DaqLab/2000 Series Features

• 16-bit, 200 kHz A/D
• 8 front-panel volts inputs P1 on rear for
  analog expansion
• 4 front-panel frequency inputs (16-bit, 10 MHz)

26
DaqLab/2000 Series Features

• 2 internal expansion slots for analog or digital
  DBK expansion cards
• 6 front-panel digital I/O lines
• 24 digital I/O via P2 on rear

27
DaqLab/2000 Series Features

• Two DaqLab/2000 Series products
• /2001 has four 16-bit, 100 kHz analog outputs
• /2005 has no analog outputs
• Includes DaqView and drivers for NI LabVIEW,
  DASYLab, C, Visual Basic, MATLAB

28
DBK Signal Conditioner
Solution for Physical Test Applications
29
DBK for Analog Output

• DBK2 4 channel card
• 14 bit DAC
• Adds additional analog outputs
• For static output or reference out. (Not a
  waveform generator)
• Output set at the beginning of the acquisition.

30
DBK for Acceleration

• DBK4
• 2 channels
• AC/DC coupling
• Supplies ICP power
• Software selectable 8 pole Butterworth filter
• Simultaneous Sample and Hold

31
DBK for Current Loop Control

• DBK5 4 channel card
• 14 bit DAC
• Adds additional analog outputs
• For static output or reference out (not a
  waveform generator)
• Output set at the beginning of the acquisition

32
DBK for Speed, RPM, Tachometers, etc.

• DBK7 converts pulse to DC voltage
• 4 channels
• 1Hz to 100 kHz (analog input)
• 1 Hz to 950 kHz (digital input)
• Inputs from 50 mV to 80 Vp-p

33
DBKs for Temperature

• DBK9 - RTD
• 8 channels of 100, 500 or 1000 Ohm RTD inputs
• 3 or 4 wire configuration
• Internal excitation source

34
DBK Expansion Chassis

• DBK10 holds 3 cards
• DBK41 holds 10 cards
• Reduces cabling issues
• DBK60 holds three cards
• Uses the DBK600 series connector panels for user
  customization

35
DBK for Current Loops

• DBK15
• 16 channels
• Header for 250 ohm resistor to convert 4-20 mA
  to 1 to 5 V
• Also good for straight voltages

36
DBKs for Strain, Load Pressure

• 2 channel DBK16, and 8 channel DBK43A
• Quarter, half and full bridge gages.
• Strain based load and pressure sensors.
• Built in filters
• Handles 120 to 1000 Ohm bridges

37
DBK for Simutaneous Sample and Hold

• DBK17 and DBK45
• 4 channels
• Eliminates time skew between channels
• User adjustable gain
• Low noise (instrumentation amp per channel)
• DBK45 includes filtering

38
DBK for Filtering

• DBK18 and DBK45
• 4 channels
• User adjustable gain
• Low noise (instrumentation amp/ch)
• 5, 10, 100, 500 and 1 kHz filters factory
  available (Butterworth)
• User can create their own RC combination to
  change to corner frequency
• DBK45 also has SSH

39
DBK for Digital Inputs (P2)

• DBK20 DBK21
• Adds 48 additional digital inputs in groups of 8
  bits
• Screw terminal or DB37

40
DBK for Digital Inputs (P2)

• DBK23 Optically Isolated
• 24 inputs per module
• 3 to 30V inputs
• Monitor switches, contacts or other on/off inputs

41
DBK Digital Outputs (P2)

• DBK24 Optically Isolated to 500 V
• Switches up to 60 V
• 24 channels
• DBK25 8 Channel Relay card
• 8 dry contact relays
• Relays latch into position
• Preset power-up state

42
DBK Battery Options

• DBK34A UPS / Battery pack
• Connects to an existing AC/DC source and supplies
  power when the main source fails.

43
DBK for 5B modules

• DBK42 16 slot module
• Connector panel is separate
• DBK44 2 channel card

44
DBKs for Thermocouple Measurements

• DBK81, DBK82, DBK83, DBK84
• 7 or 14 channel thermocouple inputs
• 4 Hz, low noise front-end
• Newest addition to the DBK line.

45
DBK65

• 8-channel module for attaching powered
  transducers to DaqBooks and LogBooks

46
DBK65 Applications

• Removable front-panel screw terminals for
  connection of 2, 3, 4, or 6 wire transducers
• Built-in power supply provides transducer power
  of 5, 10, 15, and 24 V, jumper-selectable
  per-channel (100 mA max/channel, set via
  internal jumpers)
• Other voltages between 5 and 20 V are possible if
  user installs an internal resistor

47
DBK65 Wiring Example

• 2-wire voltage measurement

48
DBK65 Wiring Example

• 2-wire transducer with 4 to 20 mA output

49
DBK65 wiring example

• 4-wire bridge-based transducer

50
DBK85

• 16 differential voltage inputs for 2000 series
  products

51
DBK85

• DBK80 card in a box with connectors
• 156 mV to 10 VFS input
• BNC signal connection

52
DBK55

• 8-channel frequency input module for all DaqBook
  and LogBook products

53
DBK55

• 8 frequency inputs via front-panel BNCs
• 1 Hz to 950 kHz range
• 12-bit resolution
• AC-coupled inputs up to 80V p-p
• Same as two DBK7 cards

54
Personal Daq/3000

• USB 2.0 interface
• Stretched Pdaq package with removable
  screw-terminal connections
• USB powered
• Includes DaqView/3000 software

55
DaqBoard/3000 USB

• USB 2.0 interface
• Stretched Pdaq package with removable
  screw-terminal connections
• USB powered
• Includes DaqView/3000 software

56
Personal Daq/3000

• 1 MHz, 16-bit A/D
• 16 SE/8 DIFF analog inputs
• 24 digital I/O
• 0, 2 or 4 1 MHz, 16-bit analog outputs
• 4 counters 32-bit, 20 MHz
• 2 timers
• 12 MHz scanning of digital input lines
• Up to 12 MHz pattern generation
• Digital I/O Counters synchronous with analog
  I/O, but consume NO time slot in scan sequencer
• users can scan 1 analog input at full 1 MHz along
  with digital inputs and counters
• Quadrature encoder capable counter inputs

57
Personal Daq Applications

• Portable volts, temperature (TC), frequency,
  pulse counting, duty cycle and digital I/O
• Lab/desktop measurements(a more-transportable
  solution than PC plug-in boards)

58
Software

• Personal DaqView
• Links to Excel
• Exports data to several popular formats
• Visual Basic and C drivers
• DASYLab drivers
• NI LabVIEW drivers