Connecting with Computer Science, 2e - PowerPoint PPT Presentation

About This Presentation
Title:

Connecting with Computer Science, 2e

Description:

Connecting with Computer Science, 2e Chapter 4 Networks Network Communication Devices LANs, WANs, and WLANs can be connected to form larger, more complex WANs Devices ... – PowerPoint PPT presentation

Number of Views:137
Avg rating:3.0/5.0
Slides: 53
Provided by: hilltopBr8
Category:

less

Transcript and Presenter's Notes

Title: Connecting with Computer Science, 2e


1
Connecting with Computer Science, 2e
  • Chapter 4
  • Networks

2
Objectives
  • In this chapter you will
  • Learn how computers are connected
  • Become familiar with different types of
    transmission media
  • Learn the differences between guided and unguided
    media
  • Learn how protocols enable networking
  • Learn about the ISO OSI reference model
  • Understand the differences between network types
  • Learn about local area networks (LANs)

3
Objectives (contd.)
  • In this chapter you will (contd.)
  • Learn about wide area networks (WANs)
  • Learn about wireless local area networks (WLANs)
  • Learn about network communication devices
  • Learn how WANs use switched networks to
    communicate
  • Learn how devices can share a communication
    medium
  • Learn about DSL, cable modems, and satellite
    communications

4
Why You Need to Know About...Networks
  • Networks
  • Connect computers together
  • Allows sharing of resources
  • Used in government research centers,
    universities, large corporations, and home
    computing
  • Integral part of computing for homes and
    enterprises
  • Include the Internet
  • Integrated into personal computers
  • Computing professional
  • Incorporates network technology into everything

5
Connecting Computers
  • Linking computers through system bus is
    impractical
  • PCI bus has 98 wires
  • Requires a very thick cable
  • Connection problem solved with technology
  • Connecting requires a medium (e.g., wire)
  • Carries electric signal and a communications
    protocol to manage processes

6
Transmission Medium
  • Transmission medium
  • Material conducting electrical and/or
    electromagnetic signals
  • Most popular copper
  • Rating transmission media
  • Bandwidth medium speed measured in bits/second
  • Signal-to-noise ratio 10 log10 (signal/noise)
  • Bit error rate ratio of incorrect bits to total
    number of bits in unit time
  • Attenuation signal weakening over distance

7
Transmission Medium (contd.)
  • Two general transmission media types
  • Guided
  • Physical media
  • Copper wire form of twisted pair or coaxial
    cable
  • Fiber-optic uses glass and light to
    transmit data
  • Unguided
  • Air and space carry radio frequency (RF) or
    infrared (IR) light signals

8
Transmission Medium (contd.)
Figure 4-1, Coaxial, twisted pair, and
fiber-optic cable are guided media
9
Copper Wire Coaxial and Twisted Pair
  • Two wires used to transmit data signal and
    ground
  • Coaxial cable (coax)
  • Copper surrounded by metal shield to reduce noise
  • Support bandwidths up to 600 MHz
  • 10BaseT
  • Twisted pair
  • Replacing copper
  • Twists dampens effects of inductance
  • All copper wiring is subject to impedance
  • Attenuation reduction in signal
  • Two types shielded and unshielded (UTP)

10
Copper Wire Coaxial and Twisted Pair (contd.)
Table 4-1, EIA/TIA twisted pair cable categories
11
Copper Wire Coaxial and Twisted Pair (contd.)
  • Twisted pair (contd.)
  • Unshielded twisted pair (UTP)
  • More popular than shielded twisted pair (STP)
  • Category 5 (Cat 5)
  • Most common twisted pair cable
  • Maximum frequency 100 MHz
  • Good for business and home use
  • Computer industry has turned to optical media
  • Provides faster data transmission

12
Fiber-Optic Cable
  • Glass fibers guide light pulses along a cable
  • Thin strand of nearly pure glass
  • Surrounded by reflective material and a tough
    outer coating
  • Transmission speeds much higher than with copper
  • Fiber-optic cables are much less susceptible to
    attenuation and inductance
  • Principle of inductance does not apply
  • Bandwidths hundreds of times faster than copper
  • Economies of scale bringing price down

13
Unguided Media Wireless Technologies
  • Benefits of wireless technology
  • Eliminates cables and cabling costs
  • Provides device mobility
  • Basis of wireless technology radio transmission
  • Examples cell phones, microwave ovens, etc.
  • Electronic signal is amplified
  • Radiated from an antenna as electromagnetic waves
  • Receiving antenna converts back to electronic
    signal
  • Electromagnetic waves
  • Transmitted at many different frequencies

14
Unguided Media WirelessTechnologies (contd.)
Table 4-2, Wireless technologies
15
Unguided Media WirelessTechnologies (contd.)
Figure 4-2, Wireless technologies
16
Unguided Media Wireless Technologies (contd.)
  • Difference between low-pitched sound and a
    high-pitched sound
  • Frequency of the sound waves, or vibrations
  • Uses same technology as car radio and cell phone
  • Industry standards (based on 2.4 GHz range)
  • IEEE 802.11 series most common
  • Bluetooth specification
  • Short-range RF links between mobile computers,
    mobile phones, digital cameras, other portable
    devices
  • Maximum distance between devices three inches to
    328 feet

17
Light Transmission
  • Infrared light used over short distances
  • Uses transmission media of air
  • Requires clear line of sight between devices
  • Used in PDAs, cell phones, notebook computers,
    wireless keyboards, and mice
  • Pulses of infrared light represent 1s and 0s of
    binary transmission
  • Speeds up to 4 Mbps

18
Protocols
  • Set of rules facilitating communication
  • Example classroom questioning
  • Often represented with a timing diagram
  • Transmission protocol
  • Provides for an orderly flow of information
  • HTTP, TCP/IP, FTP
  • Transmission Control Protocol (TCP)
  • Allows two computers to establish a communication
    connection, transfer data, and terminate the
    connection

19
Protocols (contd.)
  • Must have provisions to check for errors and
    retransmit
  • International Organization for Standardization
    (ISO)
  • Coordinates worldwide standards development
  • Comité Consultatif International Téléphonique et
    Télégraphique (International Telegraph and
    Telephone Consultative Committee, CCITT)
  • Formulated the ISO Open Systems Interconnect
    reference model (ISO OSI reference model)

20
Protocols (contd.)
Table 4-4, Timing diagram for a communication
protocol
21
ISO OSI Reference Model
  • Conceptual model with seven discrete layers
  • Physical
  • Defines electrical, mechanical, procedural, and
    functional specifications for activating and
    maintaining the physical link between end systems
  • Data Link
  • Provides reliable data transit, physical
    addressing, data error notification, ordered
    delivery of frames, and flow control
  • Network
  • Provides connectivity and path selection, and
    assigns addresses to messages

22
ISO OSI Reference Model (contd.)
  • Conceptual model with seven discrete layers
    (contd.)
  • Transport
  • Guarantees delivery of datagrams
  • Provides fault detection, error recovery, and
    flow control
  • Manages virtual circuits
  • Session
  • Establishes, maintains, and terminates
    communication session between applications

23
ISO OSI Reference Model (contd.)
  • Conceptual model with seven discrete layers
    (contd.)
  • Presentation
  • Formats data for presentation to an application
  • Performs character format translation ASCII to
    Unicode
  • Syntax selection
  • Application
  • Provides network access to applications

24
ISO OSI Reference Model (contd.)
  • Layers are defined by two components
  • Header
  • Layer and message information
  • Sending side of the communication creates the
    header
  • Corresponding layer on the receiving side uses
    the header
  • Protocol Data Unit (PDU)
  • Communicates information about the message to the
    next layer on the same side

25
ISO OSI Reference Model (contd.)
Figure 4-3, How the OSI model processes data
26
Network Types
  • May be classified according to size and proximity
  • Local area network (LAN)
  • Small number of computers connected in close
    proximity
  • Usually confined to building or complex
  • Uses copper wire
  • Wide area network (WAN)
  • Many computers spread over large geographical
    area
  • Typically spans cities, states, or continents

27
Network Types (contd.)
  • MAN (metropolitan area network)
  • Spans a city or metropolitan area
  • Distinction between WAN and MAN
  • No standardized definition
  • LAN is confined to a single building
  • Internet is classified as largest WAN
  • WLAN (wireless local area network)
  • LAN using wireless transmission medium
  • IEEE 802.11 protocol family often used

28
Network Types (contd.)
Figure 4-4, Example of a WAN configuration
29
LAN Topologies
  • Network configurations
  • Node computer attached to a network
  • Addressable device
  • Three basic LAN topologies
  • Ring connects computers in a loop with cable
  • Star computers connected to hub (central point)
  • Bus configured like a system bus on a
    computer (most popular)
  • Internet and home networking
  • Increasing star topology popularity

30
LAN Topologies (contd.)
Figure 4-5, LAN topologies
31
LAN Communication Technologies
  • Ethernet
  • Widely used technology
  • Industry standard
  • Based on a bus topology
  • Can be wired in a star pattern (star/bus)
    topology
  • Original Ethernet transferred data at 10 Mbps
  • Fast Ethernet transfers data at 100 Mbps
  • Gigabit Ethernet transfers data from 1 to 10 Gbps

32
LAN Communication Technologies (contd.)
  • Token ring
  • Second most popular LAN technology
  • Uses a ring topology
  • Controls access to the network by passing token
  • Capable of data transfer of 4 or 16 Mbps
  • FDDI and ATM
  • Generally faster and more expensive

33
LAN Communication Technologies (contd.)
Table 4-5, Bandwidths of LAN technologies
34
Network Communication Devices
  • LANs, WANs, and WLANs can be connected to form
    larger, more complex WANs
  • Devices used to created connectivity
  • Network interface cards
  • Repeaters, hubs, and switches
  • Bridges
  • Gateways
  • Routers and firewalls

35
Network Communication Devices (contd.)
  • NIC
  • Required for physical device connected to network
  • Usually in motherboard expansion slot or card
    slot in notebook
  • Includes external port
  • Has unique 48-bit address (physical or MAC
    address)
  • Repeater
  • Alleviates attenuation problem
  • Amplifies signal along cable between nodes
  • Does not alter data content

36
Network Communication Devices (contd.)
  • Hub
  • Special repeater with multiple inputs and outputs
  • Allows multiple nodes to share same repeater
  • Switch
  • Repeater with many input and output ports
  • Inputs and outputs are not connected
  • Examines header and makes point-to-point
    connection to output addressed by packet
  • Assumes Data Link duties (OSI Layer 2)

37
Network Communication Devices (contd.)
  • Bridge
  • Similar to a switch
  • Divides network into segments to reduce traffic
  • Gateway
  • Similar to a bridge
  • Can interpret and translate different network
    protocols
  • Can connect networks of different types

38
Network Communication Devices (contd.)
  • Router
  • Like bridges and gateways
  • Function at higher OSI Layer 3
  • Directs network traffic based on logical address
  • Firewall
  • Protects network
  • Filters potentially harmful incoming and outgoing
    traffic
  • May be router based
  • Examines/restricts inbound and outbound traffic
  • Implemented in hardware or software

39
Switched Networks
Copy editor 3Kbps-should this be 30Kbps?
  • Telephone network adapted to carry digital data
  • Modems convert binary signals into audio signals
  • Telephone companies split a copper conductor
    bandwidth into multiple ranges or bands
  • Frequency modulation (FM)
  • Amplitude modulation (AM)
  • Phase modulation (PM) boost speed to 3Kbps
  • Combined compression techniques and rearranged
    transitions are used to reach 56Kbps limit

40
Switched Networks (contd.)
Figure 4-6, Frequency modulation, amplitude
modulation, and phase modulation
41
Switched Networks (contd.)
  • High-speed WANs
  • Demand for higher access speeds
  • Extend system bus
  • Copper capable of speeds up to 1.5 Mbps
  • Leasing all wire bandwidth (24 channels) results
    in faster connection
  • Very expensive
  • Dedicated line called T1
  • T3 line consists of 28 T1 lines
  • Fiber-optic cables
  • Optical carrier (OC) lines faster than T3

42
Switched Networks (contd.)
Table 4-6, High-speed WAN connections
43
Switched Networks (contd.)
  • Multiple access
  • FDM (frequency-division multiplexing)
  • Divides bandwidth among subscribers
  • Channel is sustained for duration of session
  • Wasteful use of resources
  • TDM (time-division multiplexing)
  • Divides bandwidth based on time
  • Achieves effect speeds greater than FDM

44
Switched Networks (contd.)
Figure 4-7, FDM and TDM
45
Switched Networks (contd.)
  • Digital subscriber line (DSL)
  • Combines FDM and TDM
  • Divides bandwidth into 247 channels
  • Allocates 4 KHz for voice, remainder for data
  • Modem used to place voice communication into the
    correct frequency band
  • Speeds range from 256 Kbps to 1.5 Mbps
  • Download speeds differ from upload speeds
  • Subscriber located less than 18,000 feet from
    station

46
Cable Modems
  • CATV coax cable carries hundreds of channels
  • Channels allocated 6 MHz bandwidth
  • Transmit speeds up to 42 Mbps
  • Connects Ethernet cable to modem
  • Uses TDM technology to vary upload and download
    speeds

47
Wireless Technologies
  • Offered by cell phone providers
  • Technologies
  • EDGE, EVDO, and 3G
  • May become the standard method of wireless
    networking

48
Satellite Technologies
  • Long distance wireless technology
  • Provides high-speed access to users in remote
    locations
  • Dish is used to receive television signals
    adapted for data transmission
  • Becoming an affordable alternative

49
One Last Thought
  • Networks are integral to computers and computing
  • Computer scientists extensively interact with
    networks
  • Network concepts form a foundation for further
    study

50
Summary
  • Networks link computers around the world
  • Networks are extensions of system bus
  • Transmission media, set of protocols, and network
    devices create connectivity
  • Metrics for rating media bandwidth,
    signal-to-noise ratio, bit error rate, and
    attenuation
  • Transmission media may be guided or unguided
  • Guided media copper wire (coax and twisted pair)
    and fiber-optic cables
  • Unguided media air or space (wireless)

51
Summary (contd.)
  • Protocols set of rules for communication
  • Standards TCP/IP and seven-layered OSI model
  • Network types LANs, WLANs, WANs, MANs
  • LAN topologies ring, star, bus
  • LAN technologies Ethernet, token ring, FDDI, ATM
  • Network devices NIC, repeater, hub, switch,
    bridge, gateway, router, firewall
  • Switched networks convert analog to digital
    using FM, AM, PM, compression, rearranged
    transitions

52
Summary (contd.)
  • DSL combines FDM and TDM to boost copper wire
    signals to 1.5 Mbps
  • Cable modems coax cables transmit at 1.5 to 42
    Mbps
  • Satellite technologies long distance wireless
Write a Comment
User Comments (0)
About PowerShow.com