Circular motion and the law of Gravity - PowerPoint PPT Presentation

1 / 57
About This Presentation
Title:

Circular motion and the law of Gravity

Description:

PHY231 Example - F A mass m1=2.0 kg is rotating at constant speed on a horizontal plane with radius R=1.0 m. The mass is attached through a rope to another mass m2=1 ... – PowerPoint PPT presentation

Number of Views:126
Avg rating:3.0/5.0
Slides: 58
Provided by: marc2242
Category:

less

Transcript and Presenter's Notes

Title: Circular motion and the law of Gravity


1
Circular motion and the law of Gravity
2
Angular displacement
  • Difference between final and initial angles
  • SI unit radian (rad)
  • Counterclockwise rotation is positive by
    definition

3
Units
  • Angles are sometimes expressed in degrees
  • 180º p rad 3.1415rad
  • 1 rad 180/p 57.295º
  • 1 turn is 2p 360º
  • The point can rotate by more than one turn, for
    example if it does 2.5 turns, the angular
    displacement is

4
Angular velocity
  • Average angular velocity
  • SI unit rad/s
  • The angular velocity tells you how fast an object
    is rotating. It is sometimes expressed in rpm
    (rotation per minute)
  • 1 rpm 2p/60 0.1047rad/s

5
example
  • An engine is rotating at 10.0 rpm. What is the
    angular displacement after 2.00 minutes of
    running?
  • A) 5.00 rad
  • B) 10.0 rad
  • C) 126 rad
  • D) 1200 rad

6
example
  • An engine is rotating at 10.0 rpm. What is the
    angular displacement after 2.00 minutes of
    running?
  • A) 5.00 rad
  • B) 10.0 rad
  • C) 126 rad
  • D) 1200 rad

7
Angular acceleration
  • Average angular acceleration
  • SI unit rad/s2
  • The angular acceleration tells you how much the
    angular velocity is changing through time. For
    example when you accelerate in your car, the
    wheels rotate more and more rapidly.

8
example
  • An engine rotates initially at 5000 rpm, it is
    shut off and its rotation speed decreases
    continuously until it comes to rest after 5.000
    minutes. What was the average angular
    acceleration?
  • A) -1.745 rad/s2
  • B) -16.67 rad/s2
  • C) 0.000 rad/s2
  • D) 16.67 rad/s2
  • E) 1000 rad/s2

9
example
  • An engine rotates initially at 5000 rpm, it is
    shut off and its rotation speed decreases
    continuously until it comes to rest after 5.000
    minutes. What was the average angular
    acceleration?
  • A) -1.745 rad/s2
  • B) -16.67 rad/s2
  • C) 0.000 rad/s2
  • D) 16.67 rad/s2
  • E) 1000 rad/s2

10
Displacement and angular displacement
  • For a point on a circle of radius r, the
    displacement Ds along the circular path is
  • SI units
  • Ds meter (m)
  • r meter (m)
  • Dq radian (rad)

11
Tangential velocity and angular velocity
  • tangential velocity and angular velocity are not
    the same thing
  • An object moves on a circle of radius r2.0 m at
    an angular velocity w10 rad/s. Its velocity is

12
Rotation of an object
  • For a solid object rotating
  • All the points of the object have equal angular
    velocity
  • The points farther away from the axis of rotation
    have greater tangential velocity

13
Geostationary satellite
  • There is an orbit around earth for which a
    satellite rotates at the same angular velocity
    than the earth (both do one rotation in 24h).
  • The earth has a radius RE6400 km and the
    geostationary orbit is at a radius Rg42 000 km.
    How much faster is the satellite speed compared
    to the speed of a point on earths surface?

14
Acceleration and angular acceleration
  • Tangential acceleration and angular acceleration
    are not the same thing

15
Linear and rotational motions
  • Linear

Rotational
position
angular position
velocity
angular velocity
acceleration
angular acceleration
16
Units comparison
  • Linear

Rotational
m
rad
m/s
rad/s
m/s2
rad/s2
17
Multiply by r to go from angular quantities to
tangential quantities
m
rad
m/s
rad/s
m/s2
rad/s2
Ds is the displacement in meters of the point
moving on a circle (see next slides to understand
the meaning of tangential)
18
Similarities with kinematics relations
  • There is a direct parallel between linear motion
    and rotational motion, for example

19
Lawn mower
  • You turn on your lawn mower in your backyard. The
    blades accelerates continuously for Dt3.00s
    until they reach a rotational speed of 3000 rpm.
    What has been the total angular displacement
    during that time?
  • A) 471 rad
  • B) 942 rad
  • C) 1.88103 rad

20
Lawn mower
  • You turn on your lawn mower in your backyard. The
    blades accelerates continuously for Dt3.00s
    until they reach a rotational speed of 3000 rpm.
    What has been the total angular displacement
    during that time?
  • A) 471 rad
  • B) 942 rad
  • C) 1.88103 rad

21
Rolling coin
  • A coin has initial angular velocity wi10 rad/s
    and slows down with a-2.0 rad/s2 until it is at
    rest. What has been the angular displacement ? If
    the coin has a radius of 1.0 cm, how far did it
    roll?
  • A) 20 rad 0.20 m
  • B) 25 rad 0.25 m
  • C) 40 rad 0.40 m

22
Rolling coin
  • A coin has initial angular velocity wi10 rad/s
    and slows down with a-2.0 rad/s2 until it is at
    rest. What has been the angular displacement ? If
    the coin has a radius of 1.0 cm, how far did it
    roll?

B) 25 rad 0.25 m
23
Periodicity of repetitive circular motion
  • A repetitive circular motion has a period of
    revolution, which menas the time (in seconds) it
    takes the object to do one full turn, it is
    usually noted with capital T letter
  • Lets imagine an object does 5 rotations per
    second. Its angular velocity and period are

24
Frequency of repetitive circular motion
  • A repetitive circular motion has a period of
    revolution T, and a frequency f linked by
  • T in seconds, f is in Hz (Hertz) which is
    nothing else than 1/s
  • the frequency f tells us how many turns are being
    done every second
  • In the example from the previous slide, the
    object was doing 5 turns per seconds so
  • f 5Hz

25
Circular motion
  • We know that the acceleration is the change of
    the velocity vector through time
  • If an object rotates on a circle at constant
    speed,
  • the magnitude of v is constant
  • but the direction of v changes and a?0

26
Centripetal acceleration
  • For circular motion at constant speed, what is
    the direction and magnitude of the acceleration ?
  • Consider a small duration Dt
  • Similar triangles

27
Centripetal acceleration
  • We found two things for circular motion at
    constant speed
  • acceleration points toward the center of the
    circle (thats why its called centripetal)
  • Magnitude of acceleration is v2/r

v
ac
28
Example - ac
  • A bicycle wheel is in the shop to service its
    brakes. The wheel is spinning freely at a
    constant speed.
  • You estimate the wheel does half a rotation in
    one second
  • What is the centripetal acceleration of a point
    on the tire if the wheel is 50 cm in radius?

A) 0.0 m/s2 B) 4.9 m/s2 C) 9.8 m/s2
29
Example - ac
A) 0.0 m/s2 B) 4.9 m/s2 C) 9.8 m/s2
30
Tangential centripetal acceleration
  • When an object accelerates on a circular
    trajectory, its tangential velocity changes and
    we had found
  • Where we used the subscript t for tangential to
    distinguish it from centripetal acceleration
  • Object on a circular motion with centripetal and
    tangential acceleration (object can accelerate
    or decelerate along the circular trajectory )

31
Example ac and at
  • A friend is on merry-go-round initially rotating
    with wi2.0 rad/s and at r2.0 m
  • You decide to speed-up the rotation and provide
    an angular acceleration of a1.0 rad/s2 for 1.0
    second
  • What is the amplitude of the acceleration
    experienced by your friend after you are done?
  • A) 4.0 m/s2
  • B) 9.0 m/s2
  • 18 m/s2
  • 36 m/s2

32
  • A) 4.0 m/s2
  • B) 9.0 m/s2
  • 18 m/s2
  • 36 m/s2

33
Force causing ac
  • For an object undergoing a circular motion at
    constant speed, Newtons 2nd law requires that a
    force provides the centripetal acceleration
    Fnetmacmv2/r . Example
  • Gravitation force
  • Tension in a rotating rope
  • Friction between tires and road
  • Normal force
  • .

34
Example - F
  • A mass m12.0 kg is rotating at constant speed on
    a horizontal plane with radius R1.0 m. The mass
    is attached through a rope to another mass m21.0
    kg hanging vertically
  • What is the tension in the rope and the speed of
    m1?
  • A) 9.8 N 2.2 m/s
  • B) 9.8 N 4.9 m/s
  • 20 N 2.2 m/s
  • 20 N 4.9 m/s

35
  • A) 9.8 N 2.2 m/s
  • B) 9.8 N 4.9 m/s
  • 20 N 2.2 m/s
  • 20 N 4.9 m/s

T
Tm2g
Fg,2-m2g
36
Conical pendulum
  • The pendulum is rotating at constant speed around
    the vertical axis
  • What is its speed if the length of the string is
    50 cm and the angle w.r.t. the vertical axis is
    45º?

37
L
  • The forces acting on the mass are gravity and the
    tension in the string
  • The mass is not moving vertically
  • The mass is rotating horizontally
  • Speed is constant

Tsinq
Tcosq
T
-mg
38
Car through a bend
  • A car is on a level road and goes around a
    circular bend of radius R50 m at a speed of 30.0
    mi/h
  • The centripetal force is provided by static
    friction between the tires and the road
  • What is the minimum ms needed so that the car
    doesnt slide?
  • 0.37
  • 0.74
  • C) 1.0

39
  • 0.37
  • 0.74
  • C) 1.0

40
Car in a banked curve
  • A car is turning in a frictionless banked curve
    with a bend radius R100m at an angle of 45º with
    the horizontal
  • What must be the speed of the car to make it
    through on a circular path of radius R?
  • Not possible
  • 31 m/s
  • C) 41 m/s
  • D) 51 m/s

41
  • Not possible
  • 31 m/s
  • C) 41 m/s
  • D) 51 m/s

42
Car in a banked curve with friction
  • A car is turning banked curve with a bend radius
    R100m at an angle of 45º with the horizontal
  • The coefficient of static friction between the
    tires and the road is ms0.50
  • What is the maximum speed of the car to avoid
    sliding in the curve?
  • Not possible
  • 34 m/s
  • C) 44 m/s
  • D) 54 m/s

43
Fscosq
Fssinq
D) 54 m/s
Fs
Fs points down because the car goes faster than
the nominal 31 m/s
44
Car in a banked curve with friction
  • A car is turning banked curve with a bend radius
    R100m at an angle of 45º with the horizontal
  • The coefficient of static friction between the
    tires and the road is ms0.50
  • What is the minimum speed of the car to avoid
    sliding in the curve?

45
Fs
Fssinq
Fs points up because the car goes slower than the
nominal 31 m/s and without friction the car would
slide down the bank
Fscosq
46
Gravitation (take 2)
  • At the surface of the Earth
  • ME 6.0 1024 kg
  • RE 6.4 106 m

47
Approximation near earths surface
  • Lets see how good was our approximation of a
    constant gravitational acceleration near the
    Earths surface
  • Acceleration of a mass m at a height h above
    Earths surface is
  • On Earth surface
  • 100 m above surface
  • 1000 m away from Earths surface
  • 1000 km away from Earth surface
  • Apprimation is good when h/RE very small (ltlt1)

48
Synchronous orbit
  • We had said that an object located at r42 000 km
    from the Earth center would always stay at the
    same position in the sky (so called synchronous
    or geostationary orbit), lets prove it!

49
Gravitational Potential Energy (GPE)
  • Near Earths surface we had define
  • This formula is only a good approximation when h
    is small compared to Earths radius
  • In general, GPE of an object at distance r from
    Earths center is
  • Remember that important quantity is not GPE but
    DGPE, the change in GPE

50
Escape speed
  • Now that we have a more precise formula for the
    gravitational potential energy, we can calculate
    the velocity that an object would need to have
    when launched from a planet to never fall back on
    it
  • Initially, the object is on the planets surface,
    at the end it is infinitely far from it and at
    rest

51
Escape speed
  • We apply conservation of energy
  • After some algebra we find
  • Calculating for Earth we would find vesc11.2
    km/s

52
Scaling tip
  • In some problem you are asked how a quantity
    scales when you change some parameters by some
    coefficient
  • For example one could ask, how does the escape
    velocity vary for a planetX which is 4 times as
    heavy as Earth and with a radius twice as big?
  • The trick is to express these parameters as
  • MX4ME
  • RX2RE
  • Then take general formula and replace, et voila

53
Keplers laws
  • Three Keplers laws describe the motion of
    planets around the Sun
  • 1) All planets move on elliptical orbits with the
    sun as one focal point
  • 2) A line drawn from the Sun to any planet sweeps
    out equal areas in equal time intervals
  • 3) The square of the orbital period of any planet
    is proportional to the cube of the average
    distance form the planet to the sun
  • Average distance from a planet to the sun on an
    elliptical orbit is equal to the semi-major axis
    of the ellipse

54
Ellipses
  • Circle distance to a given
  • point is constant
  • Ellipse Sum of distances from two points ( the
    two focal points) is constant

average distance from planet to focal
point (important for Keplers 3rd law)
pq constant
55
Keplers laws
  • First Law
  • Consequence of force proportional to 1/r2
  • Second Law
  • AreaSABAreaSCD if
  • DtABDtCD

56
Keplers laws
  • Third law
  • Can be easily proven for circular orbit
  • Assume planet of mass MP on a circular orbit of
    radius r around the Sun of mass MS
  • T is the time the planet takes to do one
    revolution around the sun

57
Homework (help)
  • Using Keplers third law for this planet of mass
    MP and since orbit is at radius RP
  • Rearranging to get
  • The planet is a uniform sphere of density
  • Use
    these eq. to find r
Write a Comment
User Comments (0)
About PowerShow.com