Animal Science - PowerPoint PPT Presentation

1 / 16
About This Presentation
Title:

Animal Science

Description:

Unit Animal Science Problem Area Aquaculture Lesson Microbial Cycling of Nitrogen Student Learning Objectives 1. Describe the steps of the nitrogen cycle in an ... – PowerPoint PPT presentation

Number of Views:44
Avg rating:3.0/5.0
Slides: 17
Provided by: MargeA9
Category:

less

Transcript and Presenter's Notes

Title: Animal Science


1
Unit
  • Animal Science

2
Problem Area
  • Aquaculture

3
Lesson
  • Microbial Cycling of Nitrogen

4
Student Learning Objectives
  • 1. Describe the steps of the nitrogen cycle in
    an aquaculture system.
  • 2. Identify forms of nitrogen that are harmful
    to aquaculture species.
  • 3. Identify factors which influence the toxicity
    of nitrogen in an aquaculture system.
  • 4. Explain procedures for controlling harmful
    levels of nitrogen in an aquaculture system.

5
Terms
  • Ammonia
  • Ammonia toxicity
  • Ammonification
  • Ammonium
  • Denitrification
  • Nitrate
  • Nitrification
  • Nitrification
  • Nitrite
  • Nitrite toxicity
  • Nitrobacter
  • Nitrogen gas
  • Nitrosomonas
  • Total ammonia nitrogen

6
What is the nitrogen cycle in an aquaculture
system?
  • Nitrogen is cycled through the biosphere
    constantly.
  • A. In aquaculture facilities four forms of
    nitrogen are likely to be found ammonia (NH3 ),
    ammonium (NH4 ), nitrite (NO2 ) and nitrate (NO3
    ).
  • B. Ammonia compounds in water are produced as a
    result of decomposing organic matter through the
    ammonification process. Sources of organic matter
    in an aquaculture system include uneaten feed,
    fish waste, decaying plants and bacteria. Ammonia
    is converted to nitrite by nitrosomonas bacteria
    by the process of nitrification. Gaseous ammonia
    can be lost into the atmosphere by diffusion.

7
  • C. Nitrite is converted to nitrate by the
    nitrobacter bacteria through an oxidation
    reaction. Nitrates are converted to nitrogen gas
    (N2 ) in anaerobic conditions and diffused into
    the surrounding atmosphere. This process is known
    as denitrification.
  • D. Nitrates that are not denitrified are used by
    phytoplankton, higher plants and bacteria as a
    nutrient source. Fish can then consume these
    organisms beginning the cycle again.

8
(No Transcript)
9
(No Transcript)
10
What forms of nitrogen are harmful to aquaculture
species?
  • A. Total ammonia nitrogen (TAN) levels are
    considered when determining ammonia toxicity. TAN
    includes unionized ammonia (NH3 ) and ammonium
    (NH4 ), the ionized form. Ammonia is 75100
    times less toxic than ammonium. Death can occur
    when ammonia levels reach 2 ppm and losses
    increase when above 7 ppm. Brain damage, increase
    susceptibility to disease, and slower growth are
    often seen when ammonia toxicity occurs.

11
  • B. Nitrite causes the hemoglobin in blood to
    oxidize rendering it unable to absorb and carry
    oxygen. This is a similar to the Blue Baby
    Syndrome in humans. Nitrite toxicity occurs at
    much lower levels than ammonia. Nitrite levels
    greater than 1 ppm can cause fish death.

12
What factors influence the toxicity of nitrogen
in an aquaculture system?
  • Temperature, pH and chloride concentrations are
    factors that influence the toxicity of nitrogen
    in an aquaculture system.
  • A. Unionized ammonia is more toxic at warmer
    water temperatures and at high pH. Ionized
    ammonia and unionized ammonia exist in
    equilibrium. As pH increases more unionized
    ammonia is present.
  • B. Nitrite toxicity is reduced by the presence of
    chlorides in water. The addition of sodium
    chloride or calcium chloride can reduce the
    nitrite poisoning.

13
What procedures are used to control harmful
levels of nitrogen in an aquaculture system?
  • Methods of controlling nitrogen levels include
    cultural and chemical means.
  • A. Cultural methods of controlling nitrogen
    levels include the population density control,
    proper feeding, removing excessive organic
    material, adding fresh water, and monitoring pH
    levels.
  • B. Chemical means includes the addition of acidic
    compounds to maintain the proper pH and the
    addition of chloride compounds to decrease the
    toxicity of nitrite.

14
(No Transcript)
15
(No Transcript)
16
Review/Summary
  • What is the nitrogen cycle in an aquaculture
    system?
  • What forms of nitrogen are harmful to aquaculture
    species?
  • What factors influence the toxicity of nitrogen
    in an aquaculture system?
  • What procedures are used to control harmful
    levels of nitrogen in an aquaculture system?
Write a Comment
User Comments (0)
About PowerShow.com