Goulds ISO Series ISO End Suction Centrifugal Pump - PowerPoint PPT Presentation

1 / 8
About This Presentation
Title:

Goulds ISO Series ISO End Suction Centrifugal Pump

Description:

Goulds ISO Series ISO End Suction Centrifugal Pump Goulds GIS Series Frame Mount Version Suitable for long coupled or belt driven motors. Stub Shaft Version Suitable ... – PowerPoint PPT presentation

Number of Views:196
Avg rating:3.0/5.0
Slides: 9
Provided by: Lando7
Category:

less

Transcript and Presenter's Notes

Title: Goulds ISO Series ISO End Suction Centrifugal Pump


1
GouldsISO SeriesISO End Suction Centrifugal Pump
2
  • Frame Mount Version
  • Suitable for long coupled or belt driven motors.
  • Stub Shaft Version
  • Suitable for direct attachment to 2 or 4 pole IEC
    frame motors.
  • Pumped Liquid
  • Designed for non-combustible, low viscosity
    liquids, free of solids, abrasive materials and
    fibres. Various liquid chemical compositions are
    capable of being pumped through the use of a
    variety of construction materials and seal
    options.

3
  • Pump Casing
  • Highly efficient volute type casing adopted.
  • Back-pullout design provides easy maintenance
    without disturbing the pipe work.
  • Impeller
  • Fully enclosed, hydraulically designed for
    maximum efficiency and balanced for minimum
    vibration.
  • Shaft
  • Heavy-duty stainless steel shaft for minimum
    deflection at high speed. The taper mount with
    keyed impeller provides positive locking and easy
    removal during servicing.

4
  • Shaft Seal
  • Mechanical type with excellent sealing
    performance. High temperature versions on request
  • Bearing
  • High quality oversize bearings grease lubricated
    for general service. Oil lubrication option for
    high temperatures.

5
Materials of Construction
6
Materials of Construction
7
  • Shaft Seal
  • Mechanical type with excellent sealing
    performance. High temperature versions on request
  • Bearing
  • High quality oversize bearings grease lubricated
    for general service. Oil lubrication option for
    high temperatures.

8
International StandardPump is designed in
accordance to ISO 2858.Standard Flange
DimensionAs 2129 Table E for Australia/NZ,
ISO7005.21988 PN 16 bar, compatible with
BS4504-1989, ISO 7005, 1-1992 DIN 2533-1976 for
Asia.Pumped LiquidStandard designed for
non-combustible, non-aggressive low viscosity
liquids, free of solids, abrasive materials and
fibers.
Performance RangeCapacity up to 900m3/hr.Head
up to 160 metersDischarge Port Size32 to 200
mmSuction Port Size50 to 250 mmWorking
Pressureup to 16 BarLiquid Temperature-15oC
80oC (140oC special)
Write a Comment
User Comments (0)
About PowerShow.com