Eye Controlled Operation for Disabled People Using EMG - PowerPoint PPT Presentation

About This Presentation
Title:

Eye Controlled Operation for Disabled People Using EMG

Description:

Eye Controlled Operation for Disabled People Using EMG A Project Presentation by: Fahim Ibn Karim (052437) Rashedul Amin Tuhin (052439) Tasnim Manzar (052441) – PowerPoint PPT presentation

Number of Views:165
Avg rating:3.0/5.0
Slides: 35
Provided by: Tuh6
Category:

less

Transcript and Presenter's Notes

Title: Eye Controlled Operation for Disabled People Using EMG


1
Eye Controlled Operation for Disabled People
Using EMG
A Project Presentation by
  • Fahim Ibn Karim (052437)
  • Rashedul Amin Tuhin (052439)
  • Tasnim Manzar (052441)
  • Project webpage
  • http//eyecontrolled.wordpress.com

Supervised By Prof. Dr. Ashraful Haque EEE
Department, IUT
2
Project Overview
  • EMG signal acquisition from Extraocular Muscles
    (Eye movement Muscles)
  • Processing the signals
  • Simulation and Implementation

Objective
Helping disabled people to perform several
operations (i.e. simple on/off, speed control etc)
3
EMG Overview
  • EMG Electromyography
  • Electromyography measures the electrical impulses
    of muscles at rest and during contraction.
  • Amplitudes of EMG signal range between 0 to 10 mV
    (peak-to-peak) or 0 to 1.5 mV (rms).
  • Frequency of EMG signal is between 0 to 500 Hz.
  • The usable energy of EMG signal is dominant
    between 50-150 Hz.

4
The Human Eye Movement Muscles
5
Extraocular Muscles
  • Notations
  • Superior Rectus (SR)
  • Superior Oblique (SO)
  • Lateral Rectus (LR)
  • Inferior Rectus (IR)
  • Inferior Oblique (IO)
  • Media Rectus (MR)

6
muscle movements
  • A given extraocular muscle moves the pupil, at
    the front of the eye, in a specific direction or
    directions, as follows
  • medial rectus (MR) inward, toward the nose
    (adduction)
  • lateral rectus (LR) outward, away from the nose
    (abduction)
  • superior rectus (SR) upward (elevation)
  • rotates the top of the eye toward the nose
    (intorsion)
  • inward (adduction)
  • inferior rectus (IR) downward (depression)
  • rotates the top of the eye away from the nose
    (extorsion)
  • inward (adduction)
  • superior oblique (SO)
  • primarily rotates the top of the eye toward the
    nose (intorsion)
  • secondarily moves the eye downward (depression)
  • tertiarily moves the eye outward (abduction)
  • inferior oblique (IO)
  • primarily rotates the top of the eye away from
    the nose (extorsion)
  • secondarily moves the eye upward (elevation)
  • tertiarily moves the eye outward (abduction)

7
(No Transcript)
8
cardinal positions of gaze
  • Conjugate eye movements
  • Vergence eye movements
  • saccadic eye movements
  • Smooth pursuit movements
  • These movements are simplified
  • up/right (1.3.5)
  • up/left (1.6)
  • Up (1)
  • Down (4)
  • right (3)
  • left (6)
  • down/right (3,4)
  • down/left (6,4,2)

9
Electrodes
  • Plastic piece and snap on for holding electrode
    elements
  • Dimension of 1 inch between electrode contacts
  • 4 electrode extensions and 1 body reference
    extension

10
Electrodes
  • EL1 (TDE23) 4mm silver / silver chloride
    electrodes
  • plugged into the white and black differential
    measurement sockets
  • A third positioned anywhere to make Isolated
    Ground

11
Positions of the Electrodes
Positions shown in the diagram above are (right
and left) A) Medial frontalis, B) Lateral
frontalis, C) Levator labii superioris, D)
Zygomaticus major.
12
EMG Amplifier Preamplifier
  • Industry standard instrumentation amplifier
    op-amp (INA2128)
  • Accuracy providing high bandwidth at high gain
    and output offset current
  • Differential amplifier circuit with 2 inputs
  • High gain to boost the EMG signals
  • Body Reference Circuit or Feed Back (OPA2604)

13
EMG Amplifier Preamplifier
  • Factors to be considered
  • Boost signal to TTL standard level ( 5 V.)
  • Enough gain
  • Noise/Artifact problem
  • Filter, stability of electrodes attached to skin,
    proper grounding
  • DC offset or bias problem
  • Bias adjustment

14
EMG Amplifier Preamplifier
Industry standard instrumentation amplifier
op-amp (INA2128)
15
EMG Amplifier Preamplifier
BURR-BROWN INA2128 Application Information
16
EMG Amplifier Preamplifier (cont.)
Gain Equation
Find RG at Gain 1,000
Find Gain at RG 22 ohm
17
EMG Amplifier Preamplifier (cont.)
Common Mode Rejection Ratio (CMRR) calculation
18
Averaging Body Reference Circuit
  • Common body reference circuit for 4 channels
  • Using summing amplifier circuit and sign changing
    circuit

For independent R1, R2, R3, and R4
For independent R1, and R2
For R1 R2 R3 R4
For R1 R2
19
Averaging Body Reference Circuit
Average Body Reference Circuit
20
Averaging Body Reference Circuit
Common Body Reference Output
21
EMG Amplifier Filter
  • Suppress noise that has been amplified by the
    preamplifier
  • Help to sink any DC current that cause bias to
    the output
  • Select particular signal frequency range
  • Use RC High Pass Filter of 12 Hz

22
EMG Amplifier Filter (cont.)
1st order RC High Pass Filter with Cutoff
Frequency of 12Hz
1st order RC High Pass Filter
Cutoff Frequency
Cutoff Frequency of 12 Hz
23
Amplifier and Bias Adjustment
  • Provide abilities to amplify and adjust reference
    level of output signals
  • Individual amplifier and bias adjustment unit for
    each channel
  • Use Non-Inverting circuit for amplifier unit
  • Use Voltage Follower Offset Adjustment circuit
    for bias adjustment unit
  • Provide Gain of 21 times
  • Provide Offset of 9 volts

24
Amplifier and Bias Adjustment
Ideal Non-Inverting Amplifier Circuit
Non-Inverting Output
25
Amplifier and Bias Adjustment
Amplifier Circuit with Gain Adjustment
Amplifier Circuit with Gain Adjustment
Amplifier Gain
Computing the value of R34
26
Amplifier and Bias Adjustment
Output of the circuit
Offset Adjustment for Voltage Follower
27
Amplifier and Bias Adjustment
Output of the circuit
28
Amplifier and Bias Adjustment
Output of the circuit
29
Limitations of gain and bias adjustment
  • The output can not exceed 9V or -9V (power
    supply voltage).
  • If 2 volts fed and gain is 3 and offset is 2
    volts, then the output is (2x3)28 volts, and
    we are ok with it.
  • But If 2 volts fed and gain is 10 and offset
    is -9 volts, then it gives (2x10)-911 volts,
    but opamp will still produce 9 volts.

30
Future work (Brainstorming )
  • A/D conversion, Normalizing and processing the
    EMG signals
  • Simulation and Modification (if needed)
  • Logic Design for performing different actions
  • Simulation with MATLAB and Documentation
  • Code, Code and Code for PIC microcontroller
  • Implementation to perform several operations
  • (i.e. simple on/off, speed control etc)

31
Project Block Diagram
input
ADC
EMG capture prog.
Simulation
EMG capture software
ADC
Computer
MCU/Control circuit
output
32
Sources
  • S. Siriprayoonsak "Real-Time Measurement of
    Prehensile EMG Signals," thesis defense, August
    24, 2005, SDSU
  • Gianluca De Luca Fundamental Concepts in EMG
    Signal Acquisition, 2001 Rev.2.1, March 2003,
    DelSys Inc
  • Sylvia Ounpuu Electromyography (EMG)
    Fundamentals Interpretation 6/14/1999 Chaoyang
    University of Technology
  • "Cursor Control Using Voice and Facial EMG
    Signals", by Grant Connell

33
Q A
34
Thank you for patient hearing.
Write a Comment
User Comments (0)
About PowerShow.com