Chubb multiway 2 concealed hose reel - PowerPoint PPT Presentation

1 / 1
About This Presentation
Title:

Chubb multiway 2 concealed hose reel

Description:

Each local branch team possess the best combination of skills and expertise ... Standard hose length - 19mm bore - 30m. Standard hose length - 25mm bore - 30m ... – PowerPoint PPT presentation

Number of Views:64
Avg rating:3.0/5.0
Slides: 2
Provided by: cherrym
Category:

less

Transcript and Presenter's Notes

Title: Chubb multiway 2 concealed hose reel


1
Fire and Safety Product Range
  • Chubb Hose Reels
  • Product

Chubb multiway 2 concealed hose reel
.
The Chubb Mulitway 2 Concealed Hose Reel is
housed in a recess faced with a stylish, boldly
labelled, flush-fitting door and architrave
assembly. The door swings out flat against the
wall and can be finished in any decor by the
interior designer, including veneer or laminate.
The hose reel is mounted on a swinging arm which
incorporates the water inlet this allows it to be
pulled out a full 180o. There is ample clearance
between the door and the reel. The door and the
reel are both hinged on the same side. Fixing can
be left or right handed. The architrave is
brushed anodized aluminium and provides a neat
corner edging around the recess. If required, the
recess can be fitted with a white painted steel
liner which is attached to the architrave. This
creates a total cabinet, and makes replastering
unnecessary. A support frame is available for
mounting in lightweight or partition walls.
Minimum recess dimensions to accept the steel
liner are 780W x 740H x 325mm. Features
Ribbed side plates for extra strength Concealed
behind boldly labelled flush fitting door and has
the freedom to utilise room decor Can be swing to
a full 180o Presents no obstruction to escape
route Automatic or manual operation One man
installation and low cost servicing Simple to
operate Matching cabinet available for
extinguishers and wet/dry riser Optional double
check value for use on mains water installations
Compatible with both Hosemaster and Hosemajor
Manufactured to EN671-1 Technical Information
Inlet Pressure min 2 bar, max 12 bar Inlet
Connection 25mm (M) Working Temp min 1oC, max
60oC Reel Diameter 590mm Standard hose length -
19mm bore - 30m Standard hose length - 25mm bore
- 30m Flow rate at 6 bar 41 litres per minute
Jet throw at 2 bar 10 metres
Chubb is the UKs largest and fire detection
services and operates through a national network
of branches. Each local branch team possess the
best combination of skills and expertise together
with a knowledge of your area. All backed up by
an internationally recognized leading brand. This
document is one of a wide range of data sheets
designed to provide technical details on Chubb
Fires products and services. If you require any
supplementary information, please contact your
local Chubb representative. The Chubb policy is
one of continuous development and consequently
the information contained in this publication can
be varied in detail. TELEPHONE 01224 787623/7
FAX 01224 787601
www.chubb-scotland.co.uk
Chubb
Write a Comment
User Comments (0)
About PowerShow.com