Final Exam Review - PowerPoint PPT Presentation

1 / 37
About This Presentation
Title:

Final Exam Review

Description:

Torsion Pendulum. Consider an object suspended by a wire attached at its CM. ... For both the spring and the pendulum, we can derive the SHM solution by using ... – PowerPoint PPT presentation

Number of Views:44
Avg rating:3.0/5.0
Slides: 38
Provided by: gatew314
Category:
Tags: exam | final | pendulum | review

less

Transcript and Presenter's Notes

Title: Final Exam Review


1
Final Exam Review
2
Final Exam Review
3
Final Exam Review
4
Physics 111 Lecture 25Todays Agenda
  • Recap of last lecture
  • Using initial conditions to solve problems
  • The general physical pendulum
  • The torsion pendulum
  • Energy in SHM
  • Atomic Vibrations
  • Problem Vertical Spring
  • Problem Transport Tunnel
  • SHM Review

5
SHM and Springs
Force
Solution s A cos(?t ?)
6
Velocity and Acceleration
Position x(t) A cos(?t ?) Velocity v(t)
-?A sin(?t ?) Acceleration a(t) -?2A
cos(?t ?)
by taking derivatives, since
xMAX A vMAX ?A aMAX ?2A
7
Lecture 25, Act 1Simple Harmonic Motion
  • A mass oscillates up down on a spring. Its
    position as a function of time is shown below.
    At which of the points shown does the mass have
    positive velocity and negative acceleration?

y(t)
(a)
(c)
t
(b)
8
Lecture 25, Act 1 Solution
  • The slope of y(t) tells us the sign of the
    velocity since
  • y(t) and a(t) have the opposite sign since a(t)
    -w2 y(t)

a lt 0v gt 0
a lt 0v lt 0
y(t)
(a)
(c)
t
(b)
a gt 0v gt 0
The answer is (c).
9
Example
  • A mass m 2 kg on a spring oscillates with
    amplitude A 10 cm. At t 0 its speed is
    maximum, and is v 2 m/s.
  • What is the angular frequency of oscillation ??
  • What is the spring constant k?

vMAX ?A
?
Also
k m?2
So k (2 kg) x (20 s -1) 2 800 kg/s2 800 N/m
10
Initial Conditions
Use initial conditions to determine phase ?!
Suppose we are told x(0) 0 , and x is
initially increasing (i.e. v(0) positive)
x(0) 0 A cos(?) ? ?/2 or -?/2 v(0) gt 0
-?A sin(?) ? lt 0
? -?/2
So
11
Initial Conditions...
So we find ? -?/2!!
x(t) A cos(?t - ?/2 ) v(t) -?A sin(?t - ?/2
) a(t) -?2A cos(?t - ?/2 )
x(t) A sin(?t) v(t) ?A cos(?t) a(t) -?2A
sin(?t)
12
Lecture 25, Act 2Initial Conditions
  • A mass hanging from a vertical spring is lifted a
    distance d above equilibrium and released at t
    0. Which of the following describes its velocity
    and acceleration as a function of time?

(a) v(t) -vmax sin(wt) a(t) -amax
cos(wt)
k
y
(b) v(t) vmax sin(wt) a(t) amax
cos(wt)
d
t 0
(c) v(t) vmax cos(wt) a(t) -amax
cos(wt)
0
(both vmax and amax are positive numbers)
13
Lecture 25, Act 2 Solution
Since we start with the maximum
possibledisplacement at t 0 we know that y
d cos(wt)
k
y
d
t 0
0
14
Review of Simple Pendulum
  • Using ? I? and sin ? ? ? for small ?

?
?
I
We found
where
Which has SHM solution ? ?0 cos(?t ?)
15
Review of Rod Pendulum
  • Using ? I? and sin? ? ? for small ?

?
?
I
We found
where
Which has SHM solution ? ?0 cos(?t ?)
16
General Physical Pendulum
Physical Pendulum
  • Suppose we have some arbitrarily shaped solid of
    mass M hung on a fixed axis, and that we know
    where the CM is located and what the moment of
    inertia I about the axis is.
  • The torque about the rotation (z) axis for small
    ? is (sin ? ? )


    ? -Mgd -MgR??

z-axis
R
?
x
CM
?
?
d
Mg
where
? ?0 cos(?t ?)
17
Lecture 25, Act 3Physical Pendulum
  • A pendulum is made by hanging a thin hoola-hoop
    of diameter D on a small nail.
  • What is the angular frequency of oscillation of
    the hoop for small displacements? (ICM mR2 for
    a hoop)

pivot (nail)
(a) (b) (c)
D
18
Lecture 25, Act 3 Solution
Hoop Pendulum
  • The angular frequency of oscillation of the hoop
    for small displacements will be given by

(see Lecture 25 notes)
Use parallel axis theorem I Icm mR2
mR2 mR2 2mR2
pivot (nail)
cm x
R
m
19
Torsion Pendulum
  • Consider an object suspended by a wire attached
    at its CM. The wire defines the rotation axis,
    and the moment of inertia I about this axis is
    known.
  • The wire acts like a rotational spring.
  • When the object is rotated, the wire is twisted.
    This produces a torque that opposes the rotation.
  • In analogy with a spring, the torque produced is
    proportional to the displacement ? -k?

20
Torsion Pendulum...
Torsion Pendulum
  • Since ? -k??? ? I???becomes

where
This is similar to the mass on spring except I
has taken the place of m (no surprise).
21
Energy in SHM
  • For both the spring and the pendulum, we can
    derive the SHM solution by using energy
    conservation.
  • The total energy (K U) of a system undergoing
    SHM will always be constant!
  • This is not surprising since there are only
    conservative forces present, hence KU energy is
  • conserved.

22
SHM and quadratic potentials
  • SHM will occur whenever the potential is
    quadratic.
  • Generally, this will not be the case
  • For example, the potential betweenH atoms in an
    H2 molecule lookssomething like this

23
SHM and quadratic potentials...
  • However, if we do a Taylor expansion of this
    function about the minimum, we find that for
    smalldisplacements, the potential IS
    quadratic

U?(x0) 0 (since x0 is minimum of potential)
24
SHM and quadratic potentials...
U(x) U?? (x0) x? 2 Let k U?? (x0)
Then U(x) k x? 2
U
U
x0
x
x ?
SHM potential!!
25
Problem Vertical Spring
  • A mass m 102 g is hung from a vertical spring.
    The equilibrium position is at y 0. The mass
    is then pulled down a distance d 10 cm from
    equilibrium and released at t 0. The measured
    period of oscillation is T 0.8 s.
  • What is the spring constant k?
  • Write down the equations for the position,
    velocity, and acceleration of the mass as
    functions of time.
  • What is the maximum velocity?
  • What is the maximum acceleration?

k
y
0
-d
m
t 0
26
Problem Vertical Spring...
  • What is k ?

k
y
0
-d
m
t 0
27
Problem Vertical Spring...
  • What are the equations of motion?
  • At t 0,
  • y -d -ymax
  • v 0
  • So we conclude

y(t) -d cos(?t) v(t) ?d sin(?t) a(t) ?2d
cos(?t)
28
Problem Vertical Spring...
y(t) -d cos(?t) v(t) ?d sin(?t) a(t) ?2d
cos(?t)
?t
0
?
??
k
y
xmax d .1m vmax ?d (7.85 s-1)(.1m)
0.78 m/s amax ?2d (7.85 s-1)2(.1m) 6.2
m/s2
0
-d
m
t 0
29
Transport Tunnel
  • A straight tunnel is dug from Urbana through the
    center of the Earth and out the other side. A
    physics 111 student jumps into the hole at noon.
  • What time does she get back to Urbana?

30
Transport Tunnel...
where MR is the mass inside radius R
FG
R
RE
MR
but
31
Transport Tunnel...
FG
R
RE
MR
Like a mass on a spring with
32
Transport Tunnel...
Like a mass on a spring with
FG
R
RE
plug in g 9.81 m/s2 and RE 6.38 x 106 m get
? .00124 s-1 and so T 5067 s
84 min
MR
33
Transport Tunnel...
  • So she gets back to Urbana 84 minutes later, at
    124 p.m.

34
Transport Tunnel...
  • Strange but true The period of oscillation does
    not require that the tunnel be straight through
    the middle!! Any straight tunnel gives the same
    answer, as long as it is frictionless and the
    density of the Earth is constant.

35
Transport Tunnel...
  • Another strange but true fact An object orbiting
    the earth near the surface will have a period of
    the same length as that of the transport tunnel.

a ?2R 9.81 ?2 6.38(10)6 m ?
.00124 s-1 so T 5067 s
84 min
36
Simple Harmonic Motion Summary
k
s
0
m
Force
Solution s A cos(?t ?)
37
Recap of todays lecture
  • Recap of last lecture
  • Using initial conditions to solve problems
    (Text 14-1)
  • The general physical pendulum (Text 14-3)
  • The torsion pendulum
  • Energy in SHM (Text 14-2)
  • Atomic Vibrations
  • Problem Vertical Spring (Text 14-3)
  • Problem Transport Tunnel
  • SHM Review
  • Look at textbook problems Chapter 14 61, 63,
    67, 68, 74, 122
Write a Comment
User Comments (0)
About PowerShow.com