Disassembly and assembly of tires

1
Disassembly and assembly of tires

• The wheels without tub

2
The ring of a wheel
3
A tire
4
The assembly paste
5
Preparing the tire for assembling on the ring of
the wheel

• A mechanik is pasting the egdes with the
  assembly paste.

6
The assembly machine
7
The ring of the wheel with the assembled valve is
placed on the assembly machine
8
A mechanik is assembling the prepared tire on
the ring of the wheel
9
A mechanic is turning on the assembly machine
and pushing the internal part of the tire
10
Then the mechanic is assembling the other side
of the tire
11
In order to avoid of any sliding down the
special clip must be used
12
Sometimes the mechanic must use a tyre lever
13
After assembling the tire the clip is taken off
14
The assembled wheel on the assembly machine
15
Pumping the assembled wheel
16
The device for pumping a compressor
17
The device for pumping with a manometer
18
Then the wheel must be balanced on a balancing
machine.
19
The wheel in assembled on the balancing machine
20
The weights
21
The weights for charging
22
The sticking weights
23
The hammer for charging the weights
24
The mechanik is turning on the balancing machine
25
According to the indications of the balancing
machine the mechanik is charging the weights
26
The weights after charging
27
The wheel is ready for assembling to the truck
28
Thank you very much for your attention
All the pictures are taken thanks to the
enterprise MOTOHANDEL Address Siedlin near
Plonska in Poland