With this version of the TechInvDB you will need to install a new dll file on your computer before y

1
With this version of the TechInvDB you will need
to install a new dll file on your computer before
you can use it. The following instructions will
assist you in performing these necessary steps.
Please follow them verbatim as deviations from
them could harm your computer. If you have any
problems or need further assistance, please call
Rick Smith at 3-2279
2
Installing DLL file for TechInvDb version 4.0
NOTE To perform this task you MUST be logged on
to the computer as a user that has ADMINISTRATOR
rights.
1.) Click on the Start button
2.) Click on Run
3.) In the run box, type \\misadmin1\inventory
3
Installing DLL file for TechInvDb version 4.0
(Continued)
4.) Right Click on the file msadomd.dll and then
click on COPY
5.) Close this window
4
Installing DLL file for TechInvDb version 4.0
(Continued)
6.) Click on the Start button
7.) Click on Run
8.) In the Run box, type c\program files\common
files\System\ado then click on OK
5
Installing DLL file for TechInvDb version 4.0
(Continued)
9.) Right Click and click on Paste
10.) If you see this message click on Yes
11.) If you see this message click on Cancel
6
Installing DLL file for TechInvDb version 4.0
(Continued)
9.) REMEMBER to COPY the TECHINVDB file from
\\misadmin1\inventory to YOUR computer then open.
10.) You are now ready to use the Technology
Inventory Database version 4.0
Any questions can be directed to Rick Smith at
3-2279