A2000 Net Survey and Net Analysis

1
A2000 Net Survey and Net Analysis
all values of an electrical networkin one
instrument

• Multifunctional power meter for survey, analysis
  and optimisation of the operation of electrical
  networks

2
Target Groups
Switch gear manufacturer simple and cheap
equipment as a replacement for individual
instruments high-functionality equipment as
universal transducer for controls
Basic versionFFT, RS232 / RS485
Full versionFFT, BUS, Datalogger
Industry high-functionality equipment
various interfaces to PLCs and control systems
Aggregate manufacturer simple and cheap
equipment use of additional functions, as a
replacement for simple controls
Building automation,facility management
high-functionality equipment various
interfaces to PLCs and control systems
Electric wholesale trade simple and cheap
equipment no advice for customers
Utilities and power distribution reliable
products various interfaces to control systems
Customers AA, AD, ME replacement for single
instruments, limit comparators, transducers
Customers of low-end equipment as a
high-functionality addition
Planning and engineering departmentssystem
integrators simple handling integration
support advertising texts
3
Typical Applications

• Measurement and supervision of all electrical
  values in low and high voltage networks, energy
  feeding, switchgears, distributions,
  installations
• Judgement of installation utilization factor,
  optimisation of installations, avoidance of
  critical operating states
• Analysis of network distortion caused by
  harmonics
• Recording of energy consumption
• Registration and judgement of peak loads and load
  profiles
• Check of reactive current compensation
• Analogue and digital communication

4
Precise Measurement Multiple Applications
Mains Survey Current, voltage (0,25)Active,
reactive, apparent power (0,5)power interval,
power factor, frequency, current in neutral
wire Minimum, maximum, averagecurrents filtered
bimetal Measurement of apparent power conform
DIN40110 without or with sign and compensation
apparent power.
Energy Consumption Active and reactive energy,
totally and in single phases or
totally,import/export, high-/low tariff HT/LT
switchover with clock or synchronisation input 2
impulse outputs, free to assigne, with
programmable rate, independent of limit indicator
relays Single line, 9 digit display
Comfortable Indicator The four essential values
of a three phase power system at a
glance. Individual buttons for - single phase,
star- and triangular measurement- the
measuring values- the average calculation Displa
y filter (smoothing of values)
Harmonic Analysis Harmonics up to the 15.
harmonic one for current and voltage per
phase Total distortion factor of currents and
voltages Maximum values stored with time and date
Versatile Transducer 2/4 analogue outputs, free
to assigne, standard signal /- 20mA, /-10V
Versatile PC, PLC, Control Systems, SCADA
Front-End RS232 for easy connection with PC and
additionally bus interfaces Modbus RTU, DIN19244,
EN60870, PROFIBUS, LonWorks, ETHERNET
Analysis with MetraWin Comfortable, free of
charge reading, visualisation, storage with
MetraWin.
Limit Indicator 2 limits, free to assign 2 limit
relays, able to switch load relays, independent
of impulse outputs
Versatile Recorder Data logger for 63.000
values,max. 12 measuring values, time or event
triggered, pre- / posttrigger
5
Impressing Outfit
Great flexibilityCurrent transformer 1 A and 5
A,with adjustable ratio
Cost saving substitution reduced number of
devices, wiring and holes
High quality productreliable and thousandfoldin
applications
1 x
Protected front side protection class IP54
Comfortable wiring and fast replacement removable
screw terminals
Low panel depth requirement fits in each cabinet
59,1 mm
Fit for export
6
Display And Operation Advantages
Comfortable Displaythe essential four values of
a 3-phase network at a glance
Adaptable Brightnessselection in 8 steps
Calm Down Displayprogrammable filter 0...30 s
Fast Access To Values separate buttons for
measuring values and functions single phase,
star- and triangular measurement measuring
values maximum and average
Clear Representation long 9 digit display
forenergy counters parameter names
operation configuration Clear
Operationdifferent levels for operation an
configuration
Protection Of Adjusted Valueslock of
configuration level
equipment back
7
Exactly Measuring Values In Detail
Measuring Error Current, Voltage 0,25 1
Digit Power 0,5 1 Digit Power Factor
0,02 Frequency 0,02 Hz Energy 0,5
8
Selectable Connection
High Flexibility the right connection only has to
be programmed
9
Data-Logger - Versatile Chart Recorder
Continuous Registrationfor long term supervision
Event Triggered Registration for analysis of the
reasons
Selectable HistoryPre-Trigger 0, 25, 50, 75
Maximum 12 Measuring Valuesstorable per trigger
Trigger Suppression over external synchronous
input
Selectable Sourcesindividual phases,triangular
voltage,collective values, neutral current
Sample Time 0.3, 0.6, 1, 2, 5,10, 15, 30 s1, 2,
5, 10, 15, 30 min 1, 2, 4, 8, 12, 24 h
Selectable Measuring ValuesV, A, AAVG, W, VAr,
VA,f, Hz,Wi, VAri,VAi, Wh, VArh, Ahd, Vhdi
Interval
Store Time 1, 2, 5,10, 15, 30 min1, 2, 4, 8, 12
h1, 2, 4, 7, 14, 31 d
High Storage Capacity63000 values
Stop If Memory Is Fullor Write Over Mode
10
Comfortable Programming, Reading, EvaluatingAnd
Registration For Free

• Top Performance For Free
• METRAwin10/A2000 Freeware
• A2000 with RS232 interface is standard
• Notebook, PC available
• METRAwin10/A2000 is the software for comfortable
  programming of A2000, visualisation, registration
  and evaluation of measuring values.
• Comfortable Configuration of A2000
• Reading of A2000 data memory
• Continuous Registration (Online)
• Versatile Value Display as a function of time,
  table or bar-graph
• Programmable Time Intervals
• Storage For Configuration
• Data Export to other Windows programs
• Mathematic Functions

How can I get my METRAwin10 / A2000 ? 1.
Download free of charge http//www.gmc-instruments
.com/deutsch/produkte/metrawin10a2000.htm 2.
Order under article number Z305A Including
adapter cable with removable 3 pole screw
terminal to 9 pole Sub-D connector. 3. Included
in the order of data-logger Including the adapter
cable described in chapter 2.
11
Versatile Alarm, Transformer and Registration
Interfaces
Luxury equipmentis A2000 standard !
All Around LightSiren Burden Contactor Logic
Controller Process Control System
Standard
Limit Indicator 2 limit relays, switch-over
contact, free configurable and assignable, hystere
sis , alarm store
Standard
PC Logic Controller Process Control
System SCADA
Serial Communication RS232 and RS485
Modbus, optional Profibus DP, LON,Ethernet
Optional
Energy Meter (I/Os) 2 pulse outputs
optional, programmable pulse rate and duration,
free assignable 1 synchronous input
optional, synchronisation of measuring interval,
switch-over high / low tariff, trigger
suppression for data-logger
Counter Logic Controller Process Control
System Billing System Feeding Point
EnergySupplier
Standard
Chart Recorder Logic Controller Closed Loop
Control Process Control System
Multi-Transducer 2 analogue outputs, optionally
4,standard signal /- 20mA, /-10Vfree
configurable an assignable
12
Communication Out Of Limits
Versatile front-end forPC, PLC and control system
ECSEnergy Mangement
Internet(Web-Server)
METRAWin
LON(FTT-10A)
Remotedata-reading(Modem)
Buildingautomation
DIN 19244(RS 232)
A2000
ETHERNET
DIN 19244(RS 485)
Localnetworks
Process- instrumentation and control
Profibus DP
Suconet K(RS485) A201A
EN60870(RS485)
Telecontrol systems
MODBUS(RS 485)
Programmable logic controller
SCADA
Machines-and plant construction
Equal measuring functionsfor different
applications
13
RS232, RS485 Interface
WT 86201RS232 RS485 Converter

METRAwin10 / A2000
Definelanguage !


USB RS232Converter
PLC
TC-Network

Modem
RS 485(bus connection)
Interface Functions programming of
parameters reading of measuring values
(Online) reading of data-logger
RS 232(point to point connection)
DIN 19244 - Protocol
DIN 19244 - Protocol
MODBUS - Protocol
EN 60870 - Protocol
Special equipment may be ordered from project
department
14
Suconet K
Compact PLC PS 4
Suconet K - Master
Suconet K
A201A Suconet K - Link
RS 485 - DIN19244 Protocol
up to 31 devices
A2000RS485 DIN 19244
Suconet K - Slaves
15
Profibus DP
Simatic S7-300
Certificate Z00546
Profibus DPMaster
GSD - file andfunction blocks
Profibus DP
up to 31 devices
A2000Profibus DP
Profibus DP - Slaves
16
PROFIBUS DP Identification Nu., GSD-File
Every device with PROFIBUS needs a identification
number and a GSD - file
Identification Number 04B5 HEX
GSD - file GMC_04B5.GSD
The GSD file is a electronic device datasheet,
whichexplains the communication parameters of a
device.
!
In every plant with Profibus DP the individual
equipment must be implemented with the help of
the equipment specific GSD - file and additional
description of the corresponding parameters.
17
PROFIBUS DP Function Blocks
Function Blocks
The telegram traffic between a numeric controller
and the connected is organized by fuction blocks.
For each device which is implemented in a plant
there must be a function block in the numeric
controller.
With our function blocks for SIMATIC S 7 this
job can be done in a few minutes.
Required effort Loading of function blocks in
the SIMATIC-Managerand selecting required
parameters.
18
LonWorks (FTT-10A)

• Use in LON Networks
• Standard network variables
• Binding necessary
• Addressing with sub-net, node
• Programmable data transfer

• Use in Energy Control System
• Standard network variables
• Binding not necessary
• Addressing with Neuron-ID
• Polling from the summing unit

ECS-LAN
LON FTT-10A
LON FTT-10A
Binding necessary
Bindingnot necessary
A2000LON
A2000LON
19
ETHERNET And METRAwin10
METRAwin10 / A2000
Live measuring value overview
Complete measuring value list

Ethernet - TCP/IP
Router
Live recording andvisualisation
Hub
Device Configuration
NETBOX 3 for A2000 Supply 9...28 VDC 1,2 VA
RS485 DIN 19244
Reading an visualisationof stored data
A2000RS485 DIN 19244
A2000RS485 DIN 19244
Special equipment may be ordered from project
department
20
ETHERNET And Internet Browser
Internet Browser (Standard)
Ethernet - TCP/IP
Router
Hub
NETBOX 3 for A2000 Supply 9...28 VDC 1,2 VA
Internet Home Page
RS485 DIN 19244
A2000RS485 DIN 19244
Special equipment may be ordered from project
department
21
Mobil-Set For Energy Managers

• A2000 - Mobil-Set (A202A)
• Flexible configuration
• Long time survey with data-logger
• Evaluation with METRAwin10 / A2000
• Sync input for synchronisation of measuring
  interval or tariff switch-over
• Current measuring with optional clamps
• Security terminals for measuring values
• Measuring lines, METRAwin10/A2000 and interface
  cable included

METRAwin10 / A2000

• Analysis and Judgement
• of all network values
• of peak loads and load profiles
• of net disturbance with harmonics
• of energy consumption and power factor
• of apparent power compensation

Feeding Point OfEnergy Supplier
4 measuring lines,2 m with clips
L1 L2 L3 N
SYNC interval (15min) or high / low tariff
Clamp on transformer100/1 A oder 1000/1 A
22
A2000 Mobil-Set And Accessories

• Available Accessories
• Z3514 Clip-on Current Transformer 2000A/1A
  30 Hz...1.5 kHz 1 max. cond.Ø 150x64mm
• Z3512 Clip-on Current Transformer 1000A/1A
  30 Hz ... 5 kHz 1 max. cond.Ø 52 mm
• M1 100A Clip-on Current Transformer 100A/1A
  40 Hz... 5 kHz 2 max. cond.Ø 15 mm

• The
• A2000 Mobil-Set
• consists of
• A2000Multi-function Power Analyzer with Data
  Logger(A2000 L0 A0 R1 P1 H0 U0 W0)
• mounted into a
• Carrying Hard-Case46 cm x 16 cm x 35 cm
• Included accessories
• Connection Cables for- mains supply, - voltage
  measurement inputs incl. crocodile clips,-
  RS232 interface
• Setup and Analysis SoftwareMETRAwin 10 for A2000
• Order Number A202A

23
A2000 Mobil-Set - Connection Scheme
N
L1
L2
L3