draft-ietf-mip6-nemo-v4traversal-03 hesham@qualcomm.com - PowerPoint PPT Presentation

About This Presentation
Title:

draft-ietf-mip6-nemo-v4traversal-03 hesham@qualcomm.com

Description:

... of address to a home address independently of the address family of either address. ... Issue 76: Alt-CoA should not be used when the MN is in an IPv4 network ... – PowerPoint PPT presentation

Number of Views:10
Avg rating:3.0/5.0
Slides: 7
Provided by: brendag4
Learn more at: https://www.ietf.org
Category:

less

Transcript and Presenter's Notes

Title: draft-ietf-mip6-nemo-v4traversal-03 hesham@qualcomm.com


1
draft-ietf-mip6-nemo-v4traversal-03hesham_at_qualco
mm.com
2
Objectives in a Nutshell
  • Allow a mobile node to bind a care-of address to
    a home address independently of the address
    family of either address.
  • Support for NAT detection and traversal

3
Issues resolved
  • Issue 66 Setting up forwarding for the IPv4 HoA
  • Issue 60 Lightweight keepalive mechanism
  • Issue 76 Alt-CoA should not be used when the MN
    is in an IPv4 network
  • Issue 75 Authors on the front page

4
Outstanding issues
  • 3 issues outstanding
  • Discussion will be done on the mip6 alias
  • Issue 71 Dynamic Discovery of NAT
  • So far no clear consensus achieved 4 people
    against and 3 people for it.
  • New issue Maintaining integrity for the CoA when
    the alt-CoA is not present.
  • Some discussion but consensus not yet requested.
    To be finalised.
  • Use of mapped addresses
  • Not yet discussed on list.

5
Dynamic detection of NAT in the HAs domain
  • Current draft assumes that the HA is configured
    with the presence of a NAT in its domain.
  • Draft handles dynamic detection of the NAT in
    the MNs domain.
  • To detect a NAT in the HAs domain we need to
    include original src and dst port numbers in the
    BU.
  • There may be IPR on the solution to this problem.

IPv4
DS-MIPv6
NAT
IPv4/v6
DS-HA
DS-MIPv6
DS-MIPv6
IPv6
6
Issue 73 Use of mapped address
  • Mapped addresses are used to represent an IPv4
    CoA in IPv6 format (in src address)
  • Mapped addresses are not used for routing or
    exposed on the wire
  • Some DT members object to the use of mapped
    addresses because its an implicit indication of
    the existence of an IPv4 address or because it
    adds another address to the interface.
  • Need to resolve this issue on the list. Text will
    be sent for both sides of the problem for the WG
    to decide.
Write a Comment
User Comments (0)
About PowerShow.com