Title: ND9009 Rectangular Housing
1ND9009 Rectangular Housing Moldflow Analysis
Report This analysis is checked Flow warp and
weld line position.
2Cooling system Design
The cooling system is show like picture. All the
channel diameter is 8mm
3Material Speciality PA6 Latamid 6 H-V0 PA6
PVT data Curve
Viscosity data Curve
4Processing Setting
Package time curve
5Gate Method and dimension
The injection system is show like picture. We
suggest add 1 pcs gate on this positon.
Diameter dimension Max 5mm Min 1.5
Pin Gate 1 Pcs
6Fill time
The gray area is shot short. We suggest change
the gate QTY and add insert with venting.
7Pressure at V/P switchover
8Temperature at flow front
9Volume shrinkage at ejection
10Volume shrinkage
11Clamp force and Pressure
max62.59Ton
Max injection pressure is 179Mpa
12Deflection Z axis
13Weld line
The black line is weld line. Please check it and
confirm it .