IETF%2070%20Vancouver:%20draft-dolganow-ospf-pw3-ms-pw-ext-01 - PowerPoint PPT Presentation

About This Presentation
Title:

IETF%2070%20Vancouver:%20draft-dolganow-ospf-pw3-ms-pw-ext-01

Description:

Alex Zinin, Andrew Dolganow, Dimitri Papadimitriou, Matthew Bocci, Mustapha Aissaoui Alcatel-Lucent. Luca Martini Cisco Systems. Frederic Jounay France Telecom ... – PowerPoint PPT presentation

Number of Views:27
Avg rating:3.0/5.0
Slides: 6
Provided by: andrewd90
Learn more at: http://www.ietf.org
Category:

less

Transcript and Presenter's Notes

Title: IETF%2070%20Vancouver:%20draft-dolganow-ospf-pw3-ms-pw-ext-01


1
IETF 70 Vancouverdraft-dolganow-ospf-pw3-ms-pw-e
xt-01
  • authors
  • Alex Zinin, Andrew Dolganow,
  • Dimitri Papadimitriou, Matthew Bocci,
  • Mustapha Aissaoui Alcatel-Lucent
  • Luca Martini Cisco Systems
  • Frederic Jounay France Telecom
  • Yuji Kamite NTT

2
draft-dolganow-ospf-pw3-ms-pw-ext-01
  • Motivation/Problem recap
  • Need a method to dynamically establish MS-PW
    inside providers access, metro network
  • MP-BGP may not be deployed due to Opex/Capex
    constraints
  • Single OSPF AS in most cases
  • Draft so far
  • First presented at IETF 68 in Prague
  • Comments received and incorporated in a new
    version
  • New co-authors added (Luca Martini)

3
draft-dolganow-ospf-pw3-ms-pw-ext-01
  • Changes from version 1.0
  • Priority given to define consensus parts required
    for basic functionality
  • Advertise AIIs required for placement of MS-PW
    using OSPF
  • Router does not necessarily need to have T-LDP or
    Tunnel to advertise PW Switching LSA
  • Opaque LSA mechanism used to flood the
    advertisements (both Area and AS scope are
    allowed)
  • Pseudo Wire switching LSAs carry AIIs attached at
    T-PEs / routable through S-PE using Exterior AII
    TLV. Routers learn which AIIs to advertise
    through
  • Configuration
  • Advertisement
  • Interaction with exterior gateway protocols (BGP)
  • Full alignment with Dynamic Placement of Multi
    Segment Pseudo Wires

4
draft-dolganow-ospf-pw3-ms-pw-ext-01
Area 1
S-PE C
Area 10
Area 0
T-PE 2
Segment 2
Segment 1
Segment 3
S-PE B
T-PE 1
S-PE A
  • Example
  • Each S-PE and T-PE have their own L2 address
    (Global Id prefix).
  • T-PE1 advertises its AIIs using an Exterior AII
    TLV in PW switching Opaque LSA flooded as per
    Opaque LSA procedures
  • S-PEs inject non-backbone AIIs into their
    backbone AII advertisement and vice-versa
  • Advertisements installed and used in PW routing
    DB at T-PE 2, which can now place Multi-Segment
    Pseudo Wires to T-PE 1s AIIs

5
draft-dolganow-ospf-pw3-ms-pw-ext-01
  • Next steps
  • Adopt this draft as PWE3 WG draft (continue to
    work closely with OSPF group on any OSPF related
    topics)
  • Create an ISIS version
Write a Comment
User Comments (0)
About PowerShow.com