CTF 470VX Corrugated HiSpeed Tray Former

1
CTF 470VXCorrugated Hi-Speed Tray Former
2
CTF 470VX Corrugated Tray Former

• The innovative CTF 470VX tray former was designed
  specifically to form large corrugated trays. The
  machine features a high capacity 60 (1.52m) long
  hopper with an ergonomic 56 (1.42m) load height.
  The frame and hopper were designed to allow for a
  compact footprint that takes up only 76 x 68
  (1.87m x 1.72m) of floor space.

3
CTF 470VX Corrugated Tray Former

• Additional standard features include an
  Allen-Bradley PLC control system with HMI touch
  screen, a Nordson pressurized hot melt glue
  system, programmable glue control, metric
  construction, casters and leveling feet, and
  fully interlocked barrier guarding. Stainless
  steel frame construction is also standard with a
  washdown upgrade available, which means the
  machine can be located just about anywhere.

4
CTF 470VX Corrugated Tray Former

• Benefits Features
• Large 44 x 36 KD size range with depths up to
  12
• Stainless steel frame is easy to clean and does
  not corrode
• High capacity 60 long hopper means more time
  between refills
• Servo powered forming mandrel allows for optimal
  stroke geometry based on tray design and speed
• Nordson pressurized glue system is clean and easy
  to maintain
• Fully enclosed, Category-3 barrier guarding keeps
  operators safe, while allowing easy-open access
  for maintenance

5
CTF 470VX Corrugated Tray Former

• The CTF Corrugated Tray Former is packed with
  many standard features

Interlocked Barrier Guarding
5 long, Ergonomic Low Load Hopper
Stainless SteelFrame
Nordson Pressurized Hot Melt Glue Unit
Servo Driven Mandrel
6
CTF 470VX Corrugated Tray Former
7
CTF 470VX Corrugated Tray Former
Tray Size Range
8
CTF 470VX Corrugated Tray Former

• Standard Features
• 60 long horizontal powered hopper with a 56
  load height
• Synchronized drive system with overload detection
• Speed variable up to 40 strokes per minute
• Adjustable mandrel stroke, capable of forming
  trays 3 to 12(75 to 300mm) deep
• Nordson pressurized hot melt glue system
• Allen Bradley PLC control system with HMI touch
  screen interface
• Category-3 safety system with full safety
  guarding
• Stainless steel frame
• Casters and leveling feet for portability
• Metric construction
• Compact footprint allows for numerous
  installation options
• Group lubrication

9
CTF 470VX Corrugated Tray Former

• Options
• Quick change-over adjustments
• Washdown construction
• Discharge/outfeed conveyor
• NEMA 4X stainless steel electrical enclosure

10
CTF 470VX Corrugated Tray Former

• To learn more about what ADCO can do for you,
  please contact our Sales Team today!
• ADCO Manufacturing
• 2170 Academy AvenueSanger, CA 93657
• Tel [phone]
• sales_at_adcomfg.com
• www.ADCOMFG.com