Features

1
Features Benefits Click your mouse to
advance through the Slideshow Press Esc to cancel
Slideshow
2
The Hopper

• The hopper is securely fastened with bolts and
  has a nominal volume of
• 8m3.
• The Fintec 570 comes standard with a 12 (3650
  mm) Tipping grid.
• The tipping grid extension plates fold out to
  give a loading area of 144
• length x 63 width (4369mm length x 1900mm
  wide) on the 570.

3
Hopper Complete With Inlet Chute

• The F570 has the option of
• fitting a crusher inlet chute with a 14 Tipping
  grid.

• The Inlet chute is fitted with a hardox 400
  plate.
• The initial third of the hopper is also fitted
  with a hardox plate.
• In the same area the belt protection plate is
  fitted with a standard 10mm plate.

4
The Tipping Grid

• The grid can be tipped hydraulically by using a
  remote
• control unit, which is usually carried by the
  operator.
• By using a variety of hole setting on the
  tipping grid
• support arms, the operator can set the grid at
  different
• angles depending on the material being
  screened.
• Tipping angle of the grid is variable can be
  pre-set to
• maximise tipping performance.
• The inner leg of support is galvanised for
  longevity.

• The standard opening on the grid bars is
  4(100mm) with
• an optional 6 (150mm).
• Each grid bar is free floating and can swing
  independently.

5
Option The Vibrating Grid

• Double deck vibrating grid

• The vibrating grid can be angled hydraulically
  by using the auxiliary control valve in the
• powerunit.
• By using a variety of hole setting on the
  vibrating grid support arms, the operator can set
  
• the grid at different angles depending on the
  material being screened.
• The inner legs of support are galvanised.

6
Hopper Legs

• The galvanised legs under the Hopper can be
• raised and lowered hydraulically, decreasing
  set
• up time.
• The legs are covered in a rust-proof galvanised
• coating to improve durability.
• Large base plate, suitable for soft ground.

Hopper Belt

• The hopper belt has variable speed control and
  is
• 48 (1200mm) wide.
• The hopper belt is fitted at a 10 degree angle.
• This ensures optimum feed flow.

• Direct hydraulic drive for hopper belt feeder.

7
Galvanising

• All inner leg sections of adjustable
• supports are galvanised.

8
The Conveyors
Main Conveyor

• The main conveyor belt is 42 (1050mm) wide
• Extra high skirting plates to protect from
  bouncing
• backward rolling material.
• The side skirting plates extend over material to
  give
• added security.
• Rubber sealing strips fitted along full length
  of skirting
• plates.

• The operator can hydraulically extend and
  retract the
• main conveyor for maximum screening
  efficiency.

9
Side Conveyors

• Width 32 (800mm.)
• Discharge height 1410 (4530mm)
• High troughing rollers angle.
• Rubber skirting system extends from feed boot to
  first roller set to prevent material spillage.

Transport Brackets

• Quick release pins for transport brackets.

Hydraulic Motor

• Heavy duty hydraulic motor supporting bracket.

10
Side Conveyor Feedboots

• The extra wide feedboot allows the material time
  to
• spread out across the bottom of the belt before
  it
• moves up the variable speed side conveyor.

Support Hinges

• Side conveyor support hinges are extra heavy for
  quarry applications.
• The most heavy duty hinges in the business!

11
Side Conveyor

• The side conveyor easily folds in and out
  hydraulically,
• and this procedure can be carried out by one
  operator.
• In the transport position the side conveyor
  folds up tight
• against the machine so that it will comply with
  all
• transport regulations.

Tail Conveyor

• Hydraulic raise and lower tail conveyor, that
  allows easy
• access to the screenbox when changing screens.
• The tail conveyor belt is 48 (1200mm wide)

12
Belt Scraper

• The Rosta belt scraper is kept tensioned on the
  conveyor
• belt at all times.
• One-piece blade prevents material becoming
  jammed along
• the length of the scraper.

Belt Tension

• Belt tension belt alignment system.

13
The Screenbox

• The Screenbox is surrounded by a maintenance
  walkway, which gives the
• operator complete access to the screenbox and
  easily folds inwards for
• transportation.
• The screenbox is bolted together to eliminate
  stresses.

14
Screenbox Walkway

• The platform on the screen walkway can be easily
  folded
• for transport position.
• The walkway has a unique elbow style folding
  mechanism
• that enables the operator to set-up or fold
  away quickly.

Heavy Duty Screenbox

• Thickness of screenbox wall is 8mm.

15
Screen Tensioning

• Wedge quick release screen tensioning system on
  high impact zone of the top deck.
• Screenbox speed 990 rpm. Double deck.
• Screen size 12 x 5(3650mm x 1500mm) on both
  decks.
• 2 bearing, high amplitude screen.
• Screenbox angle adjustable from 24-30 degrees.

• Screen rotation is forward action.

Hydraulic Motor Springs

• Safety protection cover on springs.
• Heavy duty hydraulic motor screen shaft.
• High amplitude screen shaft.

16
Screen Impact Box

• The top deck screens are side tensioned and the
  bottom
• deck screens are end tensioned.
• Top deck side clamps act as protection of screen
  side plates to prevent wear.
• Hardox lined impact box on top deck screen

• Screenbox bolted to eliminate any unnecessary
  heat stress.
• Unique built-in 5 degree screen angle in bottom
  deck.
• Main conveyor position is adjustable to ensure
  material drops in screen impact box at all
  screening angles.

Screen Tensioning

• Quick release wedge system on top deck.

17
The Engine Compartment

• Hydraulic hoses professionally fitted.
• Sufficient room for repair maintenance.

Power Unit

• Cat diesel engine type 3054C.
• Meets tier 2 in European law.
• 74kw 99hp _at_ 2200rpm.
• Fuel tank capacity of 400 litres.
• Fuel consumption approx 12 litres per hour.

18
The Operational Controls
Visual Alerts Include 1) Hour meter 2) Water
Trap Filter (needs drained) 3) Emergency Stop
released 4) Emergency Stop pressed 5) Air cleaner
blockage lamp 6) Injection System 7) Pre
Heat 8) Water temperature 9) Oil Pressure
lamp 10) Charge lamp 11) Ignition switch

• Individual adjustment of conveyors speed.
• On/off operation of whole unit.
• Electrical control panel containing all engine
  data visual alert system.
• Access to engine dipstick when in transport
  mode.
• Always read the operators manual before starting
  the machine.

19
Battery Isolation Switch

• Electric isolation switch provided for safety
  when maintaining machine.

20
Oil Cooler

• The oil cooler maintains optimum temperature.

21
Greasing
Remote Grease Hoses

• All bearing have a grease line going to them so
  that the
• operator does not have to take off any guards.
• The other end on the grease line is attached to a
  grease
• nipple, which is centrally located to allow easy
  daily
• maintenance.
• These grease points can be found on a number of
  areas
• on the machine.

22
Hydraulic Tank

• The hydraulic tank has a capacity of 165 USA
  gallons
• (630 litres).
• There are 5 emergency stops on the machines.
  When
• pressed they will stop the engine immediately.

Diesel Fuel Tank

• The diesel tank is made from steel plate and
  hold
• 105 USA Gallons (400 Litres )
• The diesel tank now has an oversize lockable
  filler cap
• for filling from large fuel line.

23
The Tracks

• The crawler tracks have a length of 126
  (3800mm ) on
• the 570.
• The tracks are 20 (500mm) wide.
• The crawler tracks are bolted to the chassis for
  ease
• of maintenance.
• There is a distance of approximately 4 (100mm)
  
• between the tracks and the chassis, which gives
• adequate room for general maintenance

• Excellent ground clearance.

24
The Options
Shredder

• Single shaft with 20mm hardox steel hammer

Water Spraying

• Dust suppression system

Wear Plates

• Hardox wear plates on middle over size hopper
  of side conveyors.
• Hardox liners on spreader plate on oversize
  chute.
• Hardox liners on internal surface of belt feed
  hopper.

25
Remote Controls

• Optional remote cordless control for tracking of
  unit.

• Remote cable control for tracking of unit.

• Remote cable control for tracking of unit.
• Heavy duty socket protected by metal hood.

• Remote cordless control for tipping of grid.

26
(No Transcript)