Maxi Blend 4000 Series

1
Maxi Blend 4000 Series

• Quick Set-up Instructions

2
Choose Dispensing Equipment

• Maxi Blend 4101
• Maxi Blend 4104
• Maxi Blend 4401
• Maxi Blend 4404
• Maxi Blend 4805

3
Choose Storage Equipment
4
Choose Site for Installation
5
Locate Fresh Water Supply
6
Attach Water Supply Hose to Fresh Water Source
with Water Turned Off
7
Mount 4000 Series Proportioner Back Plate
8
Mount Storage Device / Equipment
9
Attach Proportioner Plumbing Assembly to Back
Plate
1
2
3
4
10
Secure Plumbing Assembly with Tie Strap Provided
11
(No Transcript)
12
Insert Proper Proportioning Tip to Venturi Barb
if Required

• (See Proportioning Tip Guide)
• (See Select 4 Positioning Guide

13
Place Hose End of Check Valve Assembly to Venturi
Barb
14
Attach Chemical Pick Up Tube to Other End of
Check Valve Assembly
Secure with plastic tie strap
15
Measure and Cut Pick-Up Tube to Proper Length and
Insert 38 mm. Docking Cap. Place appropriate
Decals (See Docking Cap Instructions
Cut with scissors
16
Connect Docking Caps to 4000 Series Concentrates
17
Connect Fresh Water Supply Hose to Water Pressure
Regulator already connected to 4000 Series
Proportioner
18
Turn On Fresh Water Supply
ON
19
Test and Prime Each Button
20
Replace Proportioner Cover
21
(No Transcript)