Tradition Divided Light

1
About Machinery 3 Tooling 3 Contort Copenstick U
Half-lap Joints for Glazing Bar Cassettes The
Copenstick TDL is designed specifically for the
quick and efficient production of 90Degs
Half-lap joints for the use in Simulated Divided
Light and Traditional Divided Light bars, window
grills, and decretive cabinetry. Using Half-Lap
joints, instead of individually mitered pieces
results in a stronger and esthetically pleasing
assembly. The Half-Lap joint consists of two
parts. The vertical and horizontal pieces, which
are, Half-Lapped, to produce the interlocking
joint. Since the cut is the same regardless of
profiles tooling and changeover cost is
reduced. The TDL has been built using the same
construction quality as the other machines in the
Copenstick range allowing for an array of joints
to be cut with speed and precision, even fully
profiled components can be processed without the
fear of tear-out. A high level of accuracy is
attained due to the workpiece being milled on all
three sides while remaining firmly clamped, this
negates the need to rotate the workpiece during
the machining cycle.
Technical Specification Power supply - 240v
16Amps Single Phase 50Hz. Pneumatic Supply - 6
Bar. Spindle Speed - 24000RPM. Spindle Motors - 3
X 800w. Extraction Port - 120mm. Tooling Holding
- ER11 Collets. Turret Stop - 3 Height
Positions. Tool Height Adjustment - Vertical
Spindle has 30mm micro adjustment to set
tool. Tool Width Adjustment - Horizontal Spindles
are held on clamps and can be adjusted
easily. Workpiece Width Adjustment - Self
Centering Clamp adjusted with Thumb
Screw. Min/Max Workpiece Width - 17/60mm. Min/Max
Workpiece Height - 10/56. Machine Dimensions -
480 x 800 x 1500mm (Not including Flip Stop and
Supports). Machine Weight - 150kg
Approx. Transportable - (optional) 4no. Machine
Castors including levelling device for stability.
2
COPENSTICK
About Machinery 3 Tooling 3 Contact Copenstick U
WOODWORKING MACHINERY
clamp, the workpiece can be positioned along a
flip stop for accuracy, there are 2no. pneumatic
clamps that hold down the material, these are
activated via a foot pedal which also starts the
machining cycle. The pneumatic clamps now hold
the workpiece in position and 2no. high speed
spindle motors fitted with 45 cutters descend on
both sides of the workpiece creating the V notch
on opposing sides of the workpiece, then a
further high speed spindle motor fitted with a
straight cutter will cut across the workpiece at
exactly half the material depth. The process
having been completed will automatically return
the machine to the start position ready for the
next cut via the foot pedal control.
44 1403 588772
Horsham, West Sussex. United Kindom
Services Safety Training
COPENSTICK
Quick Links Home About Machinery Tooling Contact
WOODWORKING MACHINERY
Consultancy Tooling Design
Bringing our knowledge and expertise to the
Joinery manufacturing sector
f in
Partner Companies
r
2 5
Submit