Xiamen 3rd party inspection-random qc of Pajamas clothing in fujian factory

1
Xiamen 3rd party inspection-random qc of Pajamas
clothing in fujian factory
2
Randomly selected samples At the time of final
inspection, at least 100 complete, at least 80
of each package. Quality inspectors randomly take
samples from various locations for inspection.
3

• Inspection standards for all types of clothing
• (woven/denim/knitting/sweater/car/printing/emb
  roidery/shirt)tatting.
• First, modeling inspection
• Whether the collar shape is flat, sleeve hill,
  clip circle, collar circle should be round, the
  line is clear, and the left and right should be
  symmetrical.
• Second, fabric appearance
• Running yarn, color difference, roving, cloth,
  breakage.
• Third, symmetry test
• 1. Collar, sleeve hill, and shirtbone should be
  centered
• 2. Front pocket position, size distance, collar
  tip size, front and back lapel position, color
  contrast is relative
• 3. Whether the width of the two arms and two clip
  rings is caused, the length of two sleeves and
  the size of the cuff.

4

• Fourth, work inspection
• 1. All parts of the line should be smooth and
  firm, no jumper, broken line, floating line,
  barge line can not be too much and can not appear
  in obvious
• Part, needle distance should not be too thin or
  too dense, the bottom line is suitable for
  loosening
• 2, sewing gestures, eating power to be uniform,
  to avoid tightening wrinkles
• 3, pay attention to parts collar, cylinder face,
  clip ring, work strip each bag mouth, foot side,
  cuff
• 4. The front flap is flat and straight, the left
  and right hem length - so that the round without
  wrinkling should be round, the square one - must
  be square, and the left and right collar gap
• Be the same
• 5. The zipper of the front door should be
  uniform, should have appropriate tightness, avoid
  waves, be careful to fall in the front, and the
  zipper cloth is wide left.

5

• The right side should be symmetrical, and the
  feet should be carefully raised
• 6, shoulder seam and sleeve hill, collar, eating
  potential is suitable, the collar wool should be
  natural flat wear, the collar should be relaxed
  and suitable after turning, no bottom phenomenon
• 7, the bag cover should be matched with the
  front, the fabric in the bag cover is tight and
  suitable, and the problem should not be reversed,
  whether the bag has missed the needle, jumped the
  needle, and the bag.
• It should be firm and clean, sealed without
  holes .
• 8, the shirt cloth can not be spit out (shirt
  feet, cuffs), cotton can not be exposed, whether
  there is enough sewing in the cloth, whether
  there is a crack.

6

• Shape, whether the stitch is too thin, whether
  the surface cloth of each part is compatible and
  flat, no tightness phenomenon.
• 9, Velcro can not be misplaced, heavy line,
  leakage line, up and down size to
• 10, the eye positioning should be accurate, the
  knife is clean wireless hair, the needle button
  line can not be too tight too loose, the button
  should be hit in place, the tightness is
  suitable
• 11, play jujube thickness and location should be
  appropriate design requirements, no trailer
• 12, wool fabric in the direction of the whole
  piece should be consistent.

7

• Size inspection strictly in accordance with the
  requirements of the size table.
• Tail check
• 1, all parts should be worn flat, no hot yellow,
  aurora, water stains, discoloration (pay special
  attention to the sleeve fold, silk, collar, front
  flap)
• 2, all parts to keep clean, no dirt, wireless
  head
• 3, excellent effect, soft feel, no yellow spots,
  water stains.

8

• Material inspection
• 1. The sewing position and effect of the shipping
  mark, whether the label is missing, whether the
  washing mark is suitable for the requirements,
  whether the smoke control mark is correct, and
  the glue.
• Bag, pick up needle, copy paper quality
• 2. Whether the color of the cotton rope is firm
  and the root .tightness is moderate
• 3. The button and nail should be firm and not
  allowed to fall off
• 4, lining color quality cloth quality, cotton
  thickness
• 5. Follow BOM instructions.
• Packaging inspection
• Straight folded garments, in strict accordance
  with packaging instructions.

9
(No Transcript)
10
(No Transcript)
11
Measured data(Product size,Outer Carton size)
12
Special test pajamas
13
(No Transcript)
14
(No Transcript)
15

• Inspection Report
• The report will be sent to customers within 1
  working day. After reading the report, the
  customer can decide if the goods can be
  shipped.If the customers are not satisfied with
  the inspection result, he can ask the factory to
  help rework.

16

• Eagle Eyes Quality Inspection Co.,Ltd.
• Eagle Eyes, Watch Your Quality All The Time!!!
• Office 0086-596-6718-300
• Mobile[phone]
• Email cs01_at_china-qualityinspection.com
• Website https//www.china-quality-inspection.com
• https//www.china-qualityinspection
  .com